Whenever my uMBP is on an angle (30Degrees or so) If the screen isn't practically all the way back, it tilts forward and practically shuts itself. Is this a faulty hinge? Will Apple replace this under Applecare?
The black strip that covers the hinge on my mbp (the one beneath the MacBook Pro writing) is getting increasingly loose. It slides left and right and also makes clicking noises whenever the lid is opened / shut. Obviously this is a cosmetic annoyance, but as ever, this wasn't the cheapest of laptops so faults like this are quite annoying. Anyone else had similar issues? Also is there way of taking it off and repositiong it without having to take too much of the machine apart?
Just received my 27" iMac i7. I've noticed that every few hours I need to lift the screen up, because the weight of the screen pulls it downward on it's hinge.
Does anyone else have this issue? What do I do to resolve it?
I got my Unibody MacBook the first day they were available, and since late December, the hinge has gotten stiffer and stiffer, making a cracking noise when I move it after it stays in one position for a few seconds.
I took it to the Genius Bar (covered under AppleCare) but the people there wouldn't do anything about it, saying it's within normal spec and classifying it as a "user perception issue." (The slightly condescending sound of that phrase is for another post.)
Has anyone attempted to lubricate the hinge in their laptop themselves? I removed all of the bottom paneling and looked at the hinge, but didn't see how to separate it from the case easily. Would it be a bad idea to try to squirt a little silicone lubricant into the hinge to see if that helps the issue? Is there another trick I could try.My mom has a Unibody Pro with a hinge that glides nice and smoothly and it's annoying mine is no longer working properly like this.
Build-quality wise the unibodies are really as perfect as I've ever experienced any machine to be. Simply amazing. BUT, the black plastic hinge cover is cheap and creaks as soon as I grab the computer or open the display. I opened her up to see if there was anything I could do to reinforce it or something, but I didn't want to mess with it.
Quite a few seem to have this 'issue' and I thought maybe somebody has figured out a solution?Such a shame on an otherwise perfect machine. I would have preferred the same kind of rubbery plastic that was on the old generation MBP
After converting avi files to dvd I lose audio on more than half the files. The audio works fine on the avi file. However once its converted the movie plays with no sound.
I'm currently using a free trial version of divX convertor. Then I use iDVD to burn the movie. However the problem isn't with iDVD because when I just try to play the converted movie through the divX player or quicktime there is no sound. Obviously the same holds true when I send the converted file to iDVD.
1. What is the reason for this happening?
2. Do I need to use a different convertor? Or do I need to install additional programs?
3. I'm not the most computer savvy person so please try to give a simple explanation and instruction.
For the past month I think I've kept my macbook plugged into the wall. And the battery meter now says 95% but it says fully charged and the green light is on? Is keeping it plugged in hurting my overall charge?
My friend has a late uMB and his magsafe port is very very lose. Coincidentally, his battery stopped charging around 10 days after. His computer always runs on AC power and it says the battery isnt charging but it gains around 4% every hour. He thinks its because the lose port, but I think something else is wrong. Anyone have any ideas?
I own a late 2009 MBP that I use with an external monitor as my work computer each day. At the end of the work day I generally unplug the network cable, Apple Cinema Display, and then just put it to sleep by closing the lid. Some days I use it later after I get home, others I don't. If I leave it in Sleep mode I generally lose about 5-8% of the battery by the next morning.
I'm just wondering if I'd be better off shutting it down completely each night. Any pros/cons? Battery considerations?
I recently was able to upgrade from a MacBook Pro Mid-2010 to a new MacBook Pro Mid-2012. I've only been using the laptop a few days, but it seems like the battery goes down from 100% very quickly. For example, right now I've only been using the computer for half an hour and the battery has gone from 100% to 71%. I haven't been watching movies, etc., just browsing the web.
Can I remove or transfer all of the games from a mac book air and an iPhone 4s but not lose the content. Can I have them only available on an ipod or iPad. The Problem: My son plays games on those devices. I don't want to permanently remove all the work he has done in Minecraft and others. I have to limit the games somehow!
Lately I've noticed that whenever I put my Mac to sleep, I lose a few megabytes. At first I didn't think anything about it. Until one day I let sleep for a while I was doing something, and came back to, and saw that I had lost about 300 megabytes. While it was in sleep, no applications were running and nothing was downloading. My mac is Macbook pro, 3 years old, 120 gigabyte, 2 gb of ram, 2.33 Ghz Intel Core duo, Model Identifier: 2,2, and Serial Number:W86481HGW0H Right now it's running leopard. I'm about to upgrade to Snow Leopard. So why would it lose this hard drive space when it's in sleep mode? By the way, I bought it used one year ago. So I've only had it a year. I haven't downloaded anything from any untrustworthy websites. I only download things from trusted sources(i.e. itunes.) Please help. Right now my only solution is to keep a close eye on it, and make sure that it does not go to sleep!
I have a new MacBook Pro and use it at work. I need to have it connected to the internet (wireless) even when it's closed or I lose the connection and have to log in again when I re-open it... can that be done?
There's something wrong with the Wifi connectivity on my Macbook Pro. Every few minutes, I lose connection to the internet even though it says I'm still connected to my network. I have to turn Wi-Fi off and then on for it to start working again. It only works for a few minutes and sometimes hours, but then I have to turn Wi-Fi off and then on agian. It only happens on my MacBook.
After playing with my friend's MacBook, and having a long hard think, I'm definitely of the opinion that the hinge on my MacBook is far too loose. It can still support itself, but I get major wobble upon opening, it even wobbles when I type (not ferociously).
I don't get any sort of resiliance when I try to open or close it, I literally have to be careful as so not to slam it, it's like I'm closing thin air.
It just doesn't feel sturdy enough for a notebook which needs everyday carting around and use.
Also when the MB is closed the top lid (with the screen) slides a bit this way and that over the base. Only a few millimeters, but enough to notice.
The problem is, I'm most likely only going to get one opportunity to get to see an genius.
The MB is covered by AppleCare and so forth, but will the genius open the thing up right there and then and give whatever needs tightening a good tighten?
Have any of you experienced this issue before and was it solved, and if so how? (Time, in-store or send off job, etc etc).
I reinstalled from a time machine backup and lost my backup partition plu some of my stuff seems to hang up now. my machine shipped with lion so i can get the internet reinstall i just dont want lose my apps and software
I just unboxed this beauty. This is my first mac ever and I love it so far. However one thing I noticed straight out of the box was how loose the hinges are. The screen tilts if I move the macbook air to a 90 degree angle. I've own quite a few laptops but this is the first one with a loose hinge straight out of the box. Is this normal or should I be meeting with a nerd?
On another post...I indicated that I bought a MacBook Pro 13 inch laptop loaded up with all the goodies and decided to cancel my order due in part to possibly saving by installing my own SSD and RAM. I did not really mention the main reason that I cancelled my order....
I did not mention that I went to a local Best Buy and checked out the 13 inch MacBook Pro on display. I was kind of shocked to note the amount of wiggle that was present on the display screen of the 13 inch. I read another thread about the screen becoming loose and wobbly on the 13 inch MBP after time.
Does this occur on the 15 and 17 inch models as well?
I have a 3-4 year old 15 inch MBP and the screen is still solid as a rock. I hate to spend dollars on a lesser quality product so I thought I would ask if this screen weakness comes with all of the newer MacBook Pro models.
(I did not check out the 15 or 17 inch models at Best Buy...but I intend to go back and see if they are weak also). I want to buy a 15 inch MBP...so I hope that they are solid as a rock as my older MBP.
So I just got my MacBook Air (rev A) back from AppleCare after my hinge (like many others', apparently) decided to randomly bust itself. I was very pleased that when I took my MBA to the Apple Store, they didn't bat an eye about replacing the hinge (I'd heard horror stories about Apple denying the part was defective and calling the damage a user error, even with computers covered under warranty). But I was shocked when my package arrived today and the letter inside detailed the parts replaced. Keep in mind, the only thing wrong with my computer (as far as I could tell) was a broken hinge. Here's what they replaced:
Antenna window Video Display Panel Camera Bottom Case Display Housing Clutch Clutch (two different part numbers) Bezel Top Case Logic Board
It seems like the hinge has stiffened up since owning it. Sometimes makes a pop noise when moving it from a non-moving position. I would imagine it's the plastic bezel that's kinda loose and snappy if you touch it at the bottom of the hinge but I dunno. Any one else? I can deal I just hope it doesn't cause damage.
I need this machine to be fully working when I go abroad in the Fall.
One of the biggest reasons why I didn't go for the unibody mbp is because the screen is very loose in my opinion. So loose that when you orient the laptop more than 50-60 degrees vertically, the screen will automatically start folding on itself (which it then stops when the screen reaches a 30~ish degree difference from the bottom)
I like to use my laptop a lot in bed so it is one the biggest gripes. Have Apple come to their senses and tightened the screen?
Ironically, the Apple store representative gave me the biggest BS excuse for this, they told me it was so that the laptop would not lift if you open the screen up.
That is great *BUT* the screen actually gets STIFFER as you move it more towards the base rather than looser which it should be. It's loose from about 30-110 degree, and then from the 0 to 30 degree it's pretty stiff, enough to laughably lift the device. I showed how stupid his logic was by showing him this problem on one of the devices at the store and he's like, well I don't know then.
Anyone with the latest unibody can attest to any change? This isn't a singular problem as I've found it on every single 15 inch macbook pro.
Oh I forgot to mention, this problem only affects the 15inch and maybe 17inch mbp (I haven't tested it on the 17 so I wouldn't know)
I noticed that my basically mint condition Mid2010 MBP's lid started clicking occasionally when I close it. It seems to happen on the left hinge, and only after the screen has been open for a while. Does anyone know what this is indicative of? I'm assuming that it means the screws on the hinge are either too tight or too lose. Should I attempt to fix it myself? I really do not feel like going to an Apple store to get it repaired if it's something simple like tightening a screw (yes, I know that in order to get to the actual lid, you have to do a lot of other disassembly, I've done it before).
I just purchased a new 13 inch macbook air with the 1.86 ghz processor , 2 gb of ram and a 128 gb ssd.
It is currently being delivered to me through UPS but I am worried if this new generation is plagued by the infamous "Hinge issue" that the 2008 model had.
Can anyone comment on the hinge structure of the new model and if it will last at least 3 years without hinge problems ?