MacBook Pro :: MBP Clicking Screen Hinge - Way To Fix It?
Dec 21, 2010
I noticed that my basically mint condition Mid2010 MBP's lid started clicking occasionally when I close it. It seems to happen on the left hinge, and only after the screen has been open for a while. Does anyone know what this is indicative of? I'm assuming that it means the screws on the hinge are either too tight or too lose. Should I attempt to fix it myself? I really do not feel like going to an Apple store to get it repaired if it's something simple like tightening a screw (yes, I know that in order to get to the actual lid, you have to do a lot of other disassembly, I've done it before).
View 1 Replies
ADVERTISEMENT
Feb 15, 2009
My Mac is only 2.5 months old, yet when I open and close it, I get these sporadic, clicking-like noises, almost as though the plastic hinge is coming into contact with the actual notebook, generating friction. I'm not quite certain what to make of it. Sometimes, it opens and closes smoothly and silently, yet more often than not, it makes the aforementioned noises, and I'm just wondering if this should be cause for concern. Has the plastic expanded from the heat? Could it be a loose spring?
View 13 Replies
View Related
Sep 15, 2006
My problem with my brand-new (three day old) MacBook is not a "creaky" hinge (a problem already posted at [URL]); rather, when the computer has time to warm up, the hinge makes a one-time "CLICK" upon opening the lid (the sound comes from the right corner). This is really annoying me, and I'm worried that the repeated click (which signals something rubbing against something else) will wear down the joints and ruin my computer prematurely.
[Side note: The click is especially loud and offensive when the MacBook is warmed up after half an hour or so; when it's cold and shut down, the click is much quieter. This makes me think that the plastic parts are swelling and expanding a little when the computer is power on. I'm not too comfortable with the idea of the joints wearing down due to normal use. I want this computer to last me 3 years at least!]
View 18 Replies
View Related
Jun 22, 2010
I see that a few people have an issue with the unibody 13" MBP making a "clicking" noise when the lid is opened. The issue varies from a mild click to a loud click. Usually, once the click occurs, it does not repeat itself until after sometime. This poll is to help determine whether or not it's worth it to get this issue fixed by Apple, specifically if the clicking is not bothersome (read: not too loud).
View 12 Replies
View Related
Jul 7, 2009
My 17" Macbook Pro was purchased on Feb 24th 2009 via telesales, so it's less than 6 months old. The hinge is very creaky and on the right hand side it makes a loud clicking noise when I open and close it, also the whole screen seems to creak, not just the hinge. The wall charger is in my opinion very loose, it was loose when I got it ( should have changed it then ), but I haven't really moved it that much ( maybe 10 times in the space of 5 months and this is also becoming a concern. I contacted Apple today and they told me I have 1 year of telephone support and 3 years parts and labour as I order though Higher Education.
They told me that I can go to a Apple store or authorized repair centre to have it looked at, but all the stores are 2 hours away. I asked about mail-in repairs and he said that could be set up but they would prefer if I went to a store. The question is, should I send it in and hope they take care of my Mac i.e don't scratch or mark it etc. After reading some stories about repairs, I'm a little concerned about it, and don't like anyone to touch my Laptop. Obviously I would prefer a replacement as I have work to do and I don't want to be without my Mac.
View 13 Replies
View Related
Jun 13, 2010
When I use my computer, at random times, I hear a popping noise that sounds like it's coming from the plastic hinge without me moving it. I think this has happened on other 13" models I've toyed with, but I can't fully remember. Everything else works great and it doesn't happen super often so I think I'm just going to deal but does anyone else know what's up? I think it might be the heat coming off on the plastic hinge causing a popping noise every once in a while but not sure... computer works great. Also, it's not the sudden motion sensor clicking for sure. I know what that sounds like.
View 8 Replies
View Related
May 31, 2008
My Macbook Pro is fairly new, and the hinge on both side is already making squeaking noise when I open my screen. It gets a bit annoying, I open it from the center top of the screen, not by the side. Is this a problem that I should be taking to the Apple Store? Or this can be fixed easily?
View 3 Replies
View Related
Jul 26, 2009
I have 3 problems with my aluminum macbook and I think that they are all related and are caused by each other.1) The hinge creeks sometimes when I slowly close the screen and I'm afraid it will only get worse as this just started happening.) When the macbook is closed, the screen is uneven. The right side does not completely close and there is a gap between the base of the computer and the screen. However, the left side is just fine unless I push down on the right side then the left side just goes up and becomes uneven.
View 2 Replies
View Related
Sep 8, 2006
I got my Unibody MacBook the first day they were available, and since late December, the hinge has gotten stiffer and stiffer, making a cracking noise when I move it after it stays in one position for a few seconds.
I took it to the Genius Bar (covered under AppleCare) but the people there wouldn't do anything about it, saying it's within normal spec and classifying it as a "user perception issue." (The slightly condescending sound of that phrase is for another post.)
Has anyone attempted to lubricate the hinge in their laptop themselves? I removed all of the bottom paneling and looked at the hinge, but didn't see how to separate it from the case easily. Would it be a bad idea to try to squirt a little silicone lubricant into the hinge to see if that helps the issue? Is there another trick I could try.My mom has a Unibody Pro with a hinge that glides nice and smoothly and it's annoying mine is no longer working properly like this.
View 4 Replies
View Related
Dec 7, 2010
On another post...I indicated that I bought a MacBook Pro 13 inch laptop loaded up with all the goodies and decided to cancel my order due in part to possibly saving by installing my own SSD and RAM. I did not really mention the main reason that I cancelled my order....
I did not mention that I went to a local Best Buy and checked out the 13 inch MacBook Pro on display. I was kind of shocked to note the amount of wiggle that was present on the display screen of the 13 inch. I read another thread about the screen becoming loose and wobbly on the 13 inch MBP after time.
Does this occur on the 15 and 17 inch models as well?
I have a 3-4 year old 15 inch MBP and the screen is still solid as a rock. I hate to spend dollars on a lesser quality product so I thought I would ask if this screen weakness comes with all of the newer MacBook Pro models.
(I did not check out the 15 or 17 inch models at Best Buy...but I intend to go back and see if they are weak also). I want to buy a 15 inch MBP...so I hope that they are solid as a rock as my older MBP.
View 3 Replies
View Related
Jan 7, 2011
Is it normal to have a slight gap between the screen hinge and the body? On right side there is about 1mm and on left side there is 2mm.
You can see it when the screen is open and when its closed on the back.
Ill try to attach pictures later.
But what do you guys and girls think? Does yours have a gap?
View 11 Replies
View Related
May 5, 2010
and lived to tell about it? I'm going to do it tomorrow when im putting a new drive in. My screen is getting loose..
View 1 Replies
View Related
May 13, 2010
Today I noticed that on my MBA Rev A, right screen hinge got damaged somehow. Wife said she heard a crack when she was closing the screen, and sure enough, something's messed up inside and won't close fully anymore. Screen also won't keep open as firmly as before, as right hinge became loose.The warranty is out since last year, so I tried opening it to see if there's something that I can do. Looks like some part of the hinge is broken. One little metal piece fell out of hinge when I scratched a bit there with a tiny screwdriver.On top of that, just last month my battery stopped holding charge anymore (have to keep laptop plugged in all the time or else it shuts down losing all my work when the battery meter shows ~20% life remaining)
View 7 Replies
View Related
Jun 27, 2008
if you get what i mean... mines a little loose.. its kind of annoying
View 3 Replies
View Related
Jun 15, 2009
on my old white 13" MB when I pick up the computer to take it to another room with the screen open it would never move back and forth. When I would tilt it at a 45% angle it wouldn't move. Now I just purchased a new 15" MBP (sweet btw). My only issue seems to be that when I tilt the computer 45% or more the screen almost closes.Is it a weak hinge? Can that be tightened at an apple store (I am lucky and have 4 that are within about 35 to 40 minutes here in NJ)?
View 7 Replies
View Related
Nov 2, 2009
Just sent in my 2-month MacBook Air which started squeaking in just a couple of weeks. Luckily still in warranty and they said they'll replace the whole screen clamshell for me for free.Certainly I wouldn't mind much since it's free, but is it absolutely necessary to replace the whole thing just to stop the hinge squeaking?
View 9 Replies
View Related
Apr 8, 2010
I have a macbook pro, and the screen/bezel is broken. Every time I open and close it I have to hold it etc. I am the only one who can use it with out making it completely horrible. Maybe drilling in some kind of brace or something. This stinks and stupid Apple is saying it's my fault (under warranty), and this just came about over time.
View 10 Replies
View Related
Sep 25, 2009
Lately I've noticed a loud popping noise when I adjust the tilt angle on my screen. The noise comes from the right side of the screen and is very loud. This happens when the screen angle has been stationary for a few minutes. I went to the Apple Store today and the genius told me it was normal.
View 10 Replies
View Related
Mar 31, 2012
After opening the lid yesterday morning, I noticed that the screen was extremely flimsy. Usually, it hardly rocks when i tap it, but now when I tap it, it rocks back and forth. I made an appointment with a local apple store for later this evening, but would they be able to fix this? I am very gentle with my Mac and have never dropped it. I also have AppleCare on it if that makes a difference.It seems to be the left side of the screen moving more than the right side is
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
View 3 Replies
View Related
Jun 12, 2012
I was cleaning my 17" MacBook Pro today (purchased in March, 2011), and when I was cleaning near the screen, I noticed that the black plastic of the hinge made cracking noises as I ran my cleaning cloth across it (and every time I do it now with my finger). I have never had this happen before. Is this a known, harmless defect or is it something I should get looked at by someone at an Apple Store (still under AppleCare).
Info:
MacBook Pro, Mac OS X (10.7.2), 2.3GHz Intel Core i7
View 1 Replies
View Related
Sep 7, 2014
Closed lid on pencil near hinge and screen stopped working on 2008 macbook air
Info:
MacBook Air, iOS 3.1.2
View 4 Replies
View Related
Mar 20, 2010
Iv had my macbook pro for probably a little bit under two years, I bought it when i started college and I am currently finishing my second year. I cannot complain about the performance at all as I have it upgraded to a solid state hard drive and 4GB of ram and the machine is a beast but some physical aspects of it do bother me a little bit. When living in the dorms last year it was hard to keep the machine in top shape especially when I had no idea where my desk was under the pile of GROSS in the room :P, thankfully I live in an apartment now.Anyways the problem that bothers me the most is the monitor hinge. I have seen this on a few laptops after a few years but basically when the LCD is open i can tap it lightly from behind and it will shake in a way it did not when it was first bought. It seems like it is a bit lose either right around the LCD or in the hinge area. I do not mind spending a few bucks and I am very good with my hands and computers in general, currently studying engineering, so I do not mind opening it up and doing some tweaks. Is there anything i can buy to improve this with or tutorial I can read on improving it? I would imagine this is a problem that would affect alot of people with this model of macbooks and as I never really did anything to cause this.
View 2 Replies
View Related
Feb 15, 2007
Build-quality wise the unibodies are really as perfect as I've ever experienced any machine to be. Simply amazing. BUT, the black plastic hinge cover is cheap and creaks as soon as I grab the computer or open the display. I opened her up to see if there was anything I could do to reinforce it or something, but I didn't want to mess with it.
Quite a few seem to have this 'issue' and I thought maybe somebody has figured out a solution?Such a shame on an otherwise perfect machine. I would have preferred the same kind of rubbery plastic that was on the old generation MBP
View 2 Replies
View Related
Dec 12, 2009
Mine is bulging out at the bottom of the screen, right by that area that gets burning hot when you are plugged in or are on the 9600m gt--right where is says "Macbook Pro".
I noticed that the hinge started to develop a creaking sound when I opened and closed the lid. So I investigated to see if there were any cracks in the hinge. What I found was that if you look at the space between the bezel and the screen, there is a slight (very slight) bulge right by the wording "Macbook pro". If you press down on it, it moves--unlike the rest of the bezel.
Anyone else notice this? I am pretty sure it is caused by the heat in that area. That is a really poor design.
View 8 Replies
View Related
Jan 9, 2009
I might be being over paranoid but I want to make sure this isn't something that will cause problems in the future. If I press on the right side of my screen (lightly of course) it clicks... Is this something I should be worried about?
View 6 Replies
View Related
Jan 13, 2009
- When I clean the screen with the included cloth or any cleaning cloth, the screen makes a clicking noise. As if it's like not flushed against the bezel. This only happens on the left part of the screen from, top to bottom. If I wipe in the center, no problem at all. I was wondering if anyone of you is experiencing the same problem? Btw, I also have the lines, but its very faint and I don't notice it as much as the my 3rd replacement Air, which I exchanged for this one. The Apple Store said that if I had any more line problems with this one, they won't replace it anymore and they would just try and replace the screen. I don't know if my problem is a common one and worth it to send my computer out to get its screen replaced, and who knows, maybe the replacement screen might have the lines and that's why I'm worried about getting the screen replaced, in addition to being out of my laptop for a couple of days.
View 7 Replies
View Related
Dec 18, 2009
Is this normal? it only clicks on the left side when i open all the way, and my MBP is only 4 weeks old.
View 1 Replies
View Related
Oct 28, 2005
My wife accidentaly dropped our ibook with the screen open. It landed on the corner of the screen, and the right hinge cracked a bit.It still close, but not perfect. It also seems that the hinge get worse every time I open and close it, so I left it open.happened a couople of weeks ago, and the machine it self runs perfect (or so it seems, no trouble since)I took it to my local Apple center and they said the hinge is a part of the screen, so to fix it they?ll have to change the screen. This is very expensive, especially due to the fact that it still works perfectly.The guy added that they MIGHT be able to improvise and just glue (or whatever) the hinge What do youthink are the chances that they can fix it without changing the screen?
View 24 Replies
View Related
Jun 6, 2009
On my 13" MacBook Pro, the hinge makes a cracking noise on the right side of the computer (near the power button) when the screen is positioned all the way back.The entire hinge also makes a loud popping noise when I adjust the screen position. The screen seems very tight, and it takes a little bit of effort to move the screen, and when the screen is moved it makes the loud popping noise.
This is probably going to make some of you guys cringe, but sometimes putting pressure down on the top of the case close to where the black hinge meets to unibody enclosure seems to stop the popping noises. Putting downwards pressure on the hinge, or flipping the computer over and putting pressure on it that way, also seems to alter how much popping noise there is.
If I mess around a bit with applying pressure on different parts of the computer around the hinge, I can usually eliminate the noise. But, the cracking noise when I put the screen all the way back is still there.Any ideas what to do? It's not interfering with the operation of the computer, it's just incredibly annoying and this is only a four month old machine which shouldn't be creaking and cracking already.
View 2 Replies
View Related
Jun 5, 2012
I recently split a bit of coke on my macbook now my keyboard doesnt work and my trackpad is right clicking when i want to left click.
Info:
MacBook Air
View 3 Replies
View Related
