I just unboxed this beauty. This is my first mac ever and I love it so far. However one thing I noticed straight out of the box was how loose the hinges are. The screen tilts if I move the macbook air to a 90 degree angle. I've own quite a few laptops but this is the first one with a loose hinge straight out of the box. Is this normal or should I be meeting with a nerd?
View 24 Replies
I searched the forums but can't seem to find a definitive answer in regards to having a loose hinge on the i7.
I picked mine up yesterday and it seems a little too lose for my liking. It stays in place when it is not touched, but if you push with one finger on the bottom it will switch quite easily.
Is this how they make the hinges now or is mine too loose and should be exhanged? I don't seem to have any problems with dead pixels/yellow screen/noise and would hate to exchange it.
I got my Unibody MacBook the first day they were available, and since late December, the hinge has gotten stiffer and stiffer, making a cracking noise when I move it after it stays in one position for a few seconds.
I took it to the Genius Bar (covered under AppleCare) but the people there wouldn't do anything about it, saying it's within normal spec and classifying it as a "user perception issue." (The slightly condescending sound of that phrase is for another post.)
Has anyone attempted to lubricate the hinge in their laptop themselves? I removed all of the bottom paneling and looked at the hinge, but didn't see how to separate it from the case easily. Would it be a bad idea to try to squirt a little silicone lubricant into the hinge to see if that helps the issue? Is there another trick I could try.My mom has a Unibody Pro with a hinge that glides nice and smoothly and it's annoying mine is no longer working properly like this.
Build-quality wise the unibodies are really as perfect as I've ever experienced any machine to be. Simply amazing. BUT, the black plastic hinge cover is cheap and creaks as soon as I grab the computer or open the display. I opened her up to see if there was anything I could do to reinforce it or something, but I didn't want to mess with it.
Quite a few seem to have this 'issue' and I thought maybe somebody has figured out a solution?Such a shame on an otherwise perfect machine. I would have preferred the same kind of rubbery plastic that was on the old generation MBP
I just got my 13" (4/128) MacBook Air yesterday, and I decided to use Migration Assistant instead of Setup Assistant - because I didn't want all of my applications to be put on the new Air.
Well, Migration Assistant screwed everything up. I ended having to reinstall iWork (it wouldn't recognize it), had to reset defaults, had to pull off a few files directly from Time Machine, etc.
Well I've got almost everything back to normal - except my Safari bookmarks!
Prior to all of this, I thought I could restore to factory settings using the little Apple stick - but even that was a hassle. It would only reinstall my OS, but it wouldn't erase and install the drive. I could get into Disk Utility, but the "Erase" button was "grayed" out...
Frustrated... if I could just get the Safari bookmarks somehow OR if someone could properly show me how to restore to factory settings (main issue is not being able to Erase and Install)...
I bought my first mac in February 2012. Ever since the beginning the Internet connection is always dropped. I have to click the wifi logo in the upper right hand corner and click turn wifi-off. I can immediately turn it back on and immediately the connection is fine again.
Info:MacBook Air
My 2011 Macbook pro i7 has a chronic problem: as soon as it goes to sleep, the wireless connection is lost, and has to be manually coerced back to the computer by turning the wireless off, waiting several seconds, turning it back on again, and waiting for it to find the router again. It finds the router in a few more seconds, then everything is OK until it goes to sleep again. Â
A real pain in the butt, and shouldn't be a problem on a supposedly high end computer. Â
Info:
MacBook Pro, Mac OS X (10.7.3), Macbook Pro i7 15"
I bought a new battery for my 4 year old macbook aluminum, but the new battery loses power almost as fast as the old battery. Is there something wrong with my computer or is it the battery?
Info:
MacBook Pro, Mac OS X (10.7.4)
I first installed Mavericks a couple weeks ago, onto a refurbed MacBook Pro running Mountain Lion, then used Migration Assistant to move data from and old MacBook Pro running Snow Leopard. The first couple of days, things printed normally. Then suddenly, while the laptop 'saw' the printer, it wouldn't print to it, and said I needed to install printing software. I uninstalled and reinstalled printer driversfor over an hour, finally gave up, and did the print job from another Mac.Â
A few days later, I printed something from the new Mac, just like normal. Things were fine, until today. Again, it won't send data to the printer and says I need to install the software. Well I don't, obviously.Â
Besides the laptop running Mavericks, the printer in question is a Canon MP560, which still communicates fine with 2 Macs running Snow Leopard, and Windows 7 running in Parallels. It is networked into my wifi running off an Airport Extreme.Â
On the side, I also have the unsolvable Mav issue with the Wi-Fi disconnecting everytime it wakes from sleep unless I shutt off Bluetooth, not sure if that has anything to do with this issue or not.
Info:
OS X Mavericks (10.9.3)
I am using a MacBook Air 11" (mid-2012) running OS X Mavericks (10.9.3). I'm connecting to my home LAN via WiFi connection to a TP-Link 300M Wireless router that is setup as a switch (per instructions here [URL] ...., which in turn is connected via wire (ethernet-over-power) to a Technicolor cable modem/router provided by my ISP (UPC in the Netherlands; I can look up the model number of the router if needed, but it's two floors down right now and doesn't strike me that this is the cause of the problem).Â
I have a problem that my MacBook Air intermittently loses connectivity to the internet for extended periods (minutes) even though (a) the MacBook Air maintains full connectivity to my LAN at the same time through WiFi and (b) other computers connected to the cable modem/router maintain their connection to the internet while my MacBook Air has lost its connection. Â
My test to see where the breakdown is occurring is to have four terminal windows up and running ping processes:Â
1) ping to 192.168.0.1 (my router) - this always stays live, with essentially no lost packets
2) ping to an external address (I'm using 74.125.136.94, a google.nl address) - this is my main test for access to the internet and where I see ping failures (I'm also testing with pings to other sites when the problem is occurring to ensure it's not something on the remote end).
3) ping to 192.168.0.13, which is a Synology NAS attached via ethernet cable to my main cable modem/router - this always stays live, with essentially no lost packets.
4) a login to the Synology NAS, where I am also running a continual ping to 74.125.136.94, and this external ping does NOT fail when the one from my MacBook Air does, it stays live with essentially no lost packets.Â
The problem will usually correct itself after 1-3 minutes (though the time is not consistent), and also gets corrected if I turn the MacBook Air's WiFi off and on again.Â
Info:
MacBook Air (11-inch Mid 2012), OS X Mavericks (10.9.3)
Just got a new MacBook Pro a few months ago. Migrated everything successfully from my old MBPro. Now, however, when I wake my computer each morning, it can't connect to the internet. It shows that my wifi is connected, but when I try to get mail or use Safari/Firefox/Chrome, it just spins until it tells me I have no internet connection. I then have to restart the computer and it works fine after that.Â
The fact that it works fine after restarting tells me it's something other than my wifi or my cable modem.Â
I'm running 10.9.3. Using 'Automatic' location.Â
just curious, does anyone else's MBP's battery slowly lose charge over time even though it's plugged in? I've got a 2010 MBP 13". Mine only is ever at 100% right after I have used the battery and just recharged it. then it will slowly lose that charge over time until I unplug it, use the battery enough for it to actually charge the battery when I plug it in. (Oh, and coconut battery has never said it ever had 100% full original battery capacity, best it ever said was 97%).
View 5 Replies View RelatedEverything was ok until last night when I noticed this. I'm sure I didn't change anything manually in the network settings, but now I can't keep a connection for more than 10 mins. To get it back again I have to shut the airport connection (checking the diagnostics, I get a red light on the ISP circle,yellow on Internet and server) and that lasts me another 10 mins
so far I've tried sending pings, deleting this network entry and adding it back,changing the router position, but no luck. I'm able to check the router settings (tp link), but not sure what I should be looking for
the laptop works fine at my sister's place. It's just this network at home I'm having troubles with. the same thing happened all of a sudden with my imac,so I left the Ethernet cable connected to that, as it's right next to the router and it works fine.
my laptop is less than a month old, but i've noticed when it's plugged in (i don't run on battery power), the battery percentage is going down. not the capacity, but just how much charge the laptop has. (excuse me if i'm using the wrong terms). and in about one-two weeks, the battery goes down past 95% and it starts charging itself.
View 9 Replies View Relatedevery time i open my macbook pro from sleep mode there is no internet connection, even though my wifi bars are full and black and my home router is found and ticked. after a 1-2 minute delay my mac then connects to the internet. this happens every time i open my laptop from sleep mode. i have to wait 1-2 mins. this has only started to happen in the last few days and is driving me mad as it shows it is connected to the internet.
Info:
MacBook Pro (13-inch Late 2011), iOS 5.1
I just bought a new MacBook Pro with a solid state (flash memory) disk. The battery life is good while I'm using it, but if I leave it with the cover off for a few days (asleep, I assume), it'll be mostly discharged when I open it up. I assume this isn't normal - it shouldn't be losing that much charge when closed and hibernating. I don't have "wake for ethernet access" checked, if that makes a difference. What's going on - why won't it hibernate?
View 9 Replies View RelatedI just bought a new MacBook Pro with a solid state (flash memory) disk. The battery life is good while I'm using it, but if I leave it with the cover off for a few days (asleep, I assume), it'll be mostly discharged when I open it up. I assume this isn't normal - it shouldn't be losing that much charge when closed and hybernating. I don't have "wake for ethernet access" checked, if that makes a difference. What's going on - why won't it hybernate?
View 4 Replies View RelatedMy macbook air loses its internet connection after the screensaver kicks in or after it has gone to sleep.It means I have to restart the computer to reconnect to the internet, which is a real drag.I have phoned applecare who, in fairness, were really helpful but they were unable to solve the problem during my call to them.
Info:
MacBook Air
My MacBook Pro OS 10.9.4 regularly "loses" my home printer, set up through my WIFI. Even though I can see it in the Printer Menu, it claims I am not connected. So, I delete said printer. When I go to add a new printer, it cannot find said printer and I cannot figure out how to manually tell it that it is sitting right here on my desk.
Info:
MacBook Pro (15-inch Early 2011), OS X Mountain Lion (10.8.3)
After playing with my friend's MacBook, and having a long hard think, I'm definitely of the opinion that the hinge on my MacBook is far too loose. It can still support itself, but I get major wobble upon opening, it even wobbles when I type (not ferociously).
I don't get any sort of resiliance when I try to open or close it, I literally have to be careful as so not to slam it, it's like I'm closing thin air.
It just doesn't feel sturdy enough for a notebook which needs everyday carting around and use.
Also when the MB is closed the top lid (with the screen) slides a bit this way and that over the base. Only a few millimeters, but enough to notice.
The problem is, I'm most likely only going to get one opportunity to get to see an genius.
The MB is covered by AppleCare and so forth, but will the genius open the thing up right there and then and give whatever needs tightening a good tighten?
Have any of you experienced this issue before and was it solved, and if so how? (Time, in-store or send off job, etc etc).
On another post...I indicated that I bought a MacBook Pro 13 inch laptop loaded up with all the goodies and decided to cancel my order due in part to possibly saving by installing my own SSD and RAM. I did not really mention the main reason that I cancelled my order....
I did not mention that I went to a local Best Buy and checked out the 13 inch MacBook Pro on display. I was kind of shocked to note the amount of wiggle that was present on the display screen of the 13 inch. I read another thread about the screen becoming loose and wobbly on the 13 inch MBP after time.
Does this occur on the 15 and 17 inch models as well?
I have a 3-4 year old 15 inch MBP and the screen is still solid as a rock. I hate to spend dollars on a lesser quality product so I thought I would ask if this screen weakness comes with all of the newer MacBook Pro models.
(I did not check out the 15 or 17 inch models at Best Buy...but I intend to go back and see if they are weak also). I want to buy a 15 inch MBP...so I hope that they are solid as a rock as my older MBP.
It appears that the MacBook Air may have a hinge problem.
Mine sure does, exactly as described, see [URL].
Not sure if a lawsuit will fix mine, but if it gets noticed maybe Apple will respond. Anyone else having this problem?
So I just got my MacBook Air (rev A) back from AppleCare after my hinge (like many others', apparently) decided to randomly bust itself. I was very pleased that when I took my MBA to the Apple Store, they didn't bat an eye about replacing the hinge (I'd heard horror stories about Apple denying the part was defective and calling the damage a user error, even with computers covered under warranty). But I was shocked when my package arrived today and the letter inside detailed the parts replaced. Keep in mind, the only thing wrong with my computer (as far as I could tell) was a broken hinge. Here's what they replaced:
Antenna window
Video Display Panel
Camera
Bottom Case
Display Housing
Clutch
Clutch (two different part numbers)
Bezel
Top Case
Logic Board
I want to take it to an Apple Store but doubt they will help me since my AppleCare ran out.
View 5 Replies View RelatedIt seems like the hinge has stiffened up since owning it. Sometimes makes a pop noise when moving it from a non-moving position. I would imagine it's the plastic bezel that's kinda loose and snappy if you touch it at the bottom of the hinge but I dunno. Any one else? I can deal I just hope it doesn't cause damage.
I need this machine to be fully working when I go abroad in the Fall.
I noticed that my basically mint condition Mid2010 MBP's lid started clicking occasionally when I close it. It seems to happen on the left hinge, and only after the screen has been open for a while. Does anyone know what this is indicative of? I'm assuming that it means the screws on the hinge are either too tight or too lose. Should I attempt to fix it myself? I really do not feel like going to an Apple store to get it repaired if it's something simple like tightening a screw (yes, I know that in order to get to the actual lid, you have to do a lot of other disassembly, I've done it before).
View 1 Replies View RelatedI just purchased a new 13 inch macbook air with the 1.86 ghz processor , 2 gb of ram and a 128 gb ssd.
It is currently being delivered to me through UPS but I am worried if this new generation is plagued by the infamous "Hinge issue" that the 2008 model had.
Can anyone comment on the hinge structure of the new model and if it will last at least 3 years without hinge problems ?
Is it normal to have a slight gap between the screen hinge and the body? On right side there is about 1mm and on left side there is 2mm.
You can see it when the screen is open and when its closed on the back.
Ill try to attach pictures later.
But what do you guys and girls think? Does yours have a gap?
My new week old unibody macbook hinge is so tight that when i open it, the rest of the macbook slides back a bit.
I have seen radtech's glide kit to adjust the tightness of the hinge of the old macbooks and powerbooks but nothing has been mentioned of the unibody.
So both of my hinges died and no applecare. So I wanted to see if anyone came up with a DIY solution or know anything about hinges and is it possible to make some little one and maybe for other air users.
There is no way I am paying for a new air or repairing it. Im almost close to getting my Mac Pro.
The only thing on the hinge is Patent number: RE37712
[URL]
Any more info would be nice.
