I just purchased a new 13 inch macbook air with the 1.86 ghz processor , 2 gb of ram and a 128 gb ssd.
It is currently being delivered to me through UPS but I am worried if this new generation is plagued by the infamous "Hinge issue" that the 2008 model had.
Can anyone comment on the hinge structure of the new model and if it will last at least 3 years without hinge problems ?
When i open the screen as far as i can, the moment i reach the end, i hear a click/creak from the right corner. This happens not always.
I also discovered that the hinge on the right side feel loser than the left side.
How? just push each side, and feel the difference.
I searched the forums but can't seem to find a definitive answer in regards to having a loose hinge on the i7.
I picked mine up yesterday and it seems a little too lose for my liking. It stays in place when it is not touched, but if you push with one finger on the bottom it will switch quite easily.
Is this how they make the hinges now or is mine too loose and should be exhanged? I don't seem to have any problems with dead pixels/yellow screen/noise and would hate to exchange it.
I got my Unibody MacBook the first day they were available, and since late December, the hinge has gotten stiffer and stiffer, making a cracking noise when I move it after it stays in one position for a few seconds.
I took it to the Genius Bar (covered under AppleCare) but the people there wouldn't do anything about it, saying it's within normal spec and classifying it as a "user perception issue." (The slightly condescending sound of that phrase is for another post.)
Has anyone attempted to lubricate the hinge in their laptop themselves? I removed all of the bottom paneling and looked at the hinge, but didn't see how to separate it from the case easily. Would it be a bad idea to try to squirt a little silicone lubricant into the hinge to see if that helps the issue? Is there another trick I could try.My mom has a Unibody Pro with a hinge that glides nice and smoothly and it's annoying mine is no longer working properly like this.
Build-quality wise the unibodies are really as perfect as I've ever experienced any machine to be. Simply amazing. BUT, the black plastic hinge cover is cheap and creaks as soon as I grab the computer or open the display. I opened her up to see if there was anything I could do to reinforce it or something, but I didn't want to mess with it.
Quite a few seem to have this 'issue' and I thought maybe somebody has figured out a solution?Such a shame on an otherwise perfect machine. I would have preferred the same kind of rubbery plastic that was on the old generation MBP
I have an iPad 32GB WiFi and a MacBook Pro as well so I was trying very hard to justify myself in getting an 11" MBA but ending up talking myself out of it. The 13" MBP is perfect for my uses. It's already lightweight and portable as it is. After playing with the 11" in the Apple store, I was impressed on how light it was. This no doubt blows away any netbook or any notebook in it's weight class in terms of size and performance. However, the MBP's battery life, hard drive space, and processing power OUTWEIGHS the reasons of dumping my 13" MBP for the Air. Also, I have it hooked up to a 21.5 Inch HP monitor at home and it's good enough to use as a main computer at home, and light enough to take on the road.
If I needed to lookup something quickly in bed or around the house, that's where the iPad comes in. If I needed to send a quick e-mail, my HTC Evo is already great at doing that. If I didn't have a 13" MBP or even the iPad, I would have most likely went ahead and purchased the MBA. Just now at this point, spending another $1000+ or getting rid of my MBP doesn't make much sense... yet.
I've been lurking MacRumors ever since 'the wait for Arrandale' began and finally decided to sign up now so I could post this thread. I've been a Windows user for a long time now and I have a Win7 rig at home. However, I'll be going to uni later this year so I need a good portable notebook that's suitable for the common mailing 'n surfing, but also for doing some programming in Eclipse (Java) and PHP work etc. I still have my Win7 box at home for gaming and things that require larger screensize, but for the notebook... I feel really attracted to OSX with a MBP.
It will be my first Mac, but my desktop dualboots with OSX and I love it. So that's why I have decided that my school notebook will be a Mac. This is why I have been closely watching the rumors for the new MBPs and ofcourse I was pretty disappointed when I saw that the 13" model still had a C2D cpu... It's not that I need a beefed up CPU in my notebook (... I have a 3.6 GHz quad at home ), but it feels 'wrong' to buy a MBP 13": even the 2009 MacBook has a C2D, so what will the MB 2010 update bring? Is it really worth the extra money? Anyone with a similar situation?
VIDEO - Photoshop CS5 on (2010) VS Macbook Pro (2010)
View 7 Replies View RelatedAfter playing with my friend's MacBook, and having a long hard think, I'm definitely of the opinion that the hinge on my MacBook is far too loose. It can still support itself, but I get major wobble upon opening, it even wobbles when I type (not ferociously).
I don't get any sort of resiliance when I try to open or close it, I literally have to be careful as so not to slam it, it's like I'm closing thin air.
It just doesn't feel sturdy enough for a notebook which needs everyday carting around and use.
Also when the MB is closed the top lid (with the screen) slides a bit this way and that over the base. Only a few millimeters, but enough to notice.
The problem is, I'm most likely only going to get one opportunity to get to see an genius.
The MB is covered by AppleCare and so forth, but will the genius open the thing up right there and then and give whatever needs tightening a good tighten?
Have any of you experienced this issue before and was it solved, and if so how? (Time, in-store or send off job, etc etc).
I just unboxed this beauty. This is my first mac ever and I love it so far. However one thing I noticed straight out of the box was how loose the hinges are. The screen tilts if I move the macbook air to a 90 degree angle. I've own quite a few laptops but this is the first one with a loose hinge straight out of the box. Is this normal or should I be meeting with a nerd?
View 24 Replies View RelatedOn another post...I indicated that I bought a MacBook Pro 13 inch laptop loaded up with all the goodies and decided to cancel my order due in part to possibly saving by installing my own SSD and RAM. I did not really mention the main reason that I cancelled my order....
I did not mention that I went to a local Best Buy and checked out the 13 inch MacBook Pro on display. I was kind of shocked to note the amount of wiggle that was present on the display screen of the 13 inch. I read another thread about the screen becoming loose and wobbly on the 13 inch MBP after time.
Does this occur on the 15 and 17 inch models as well?
I have a 3-4 year old 15 inch MBP and the screen is still solid as a rock. I hate to spend dollars on a lesser quality product so I thought I would ask if this screen weakness comes with all of the newer MacBook Pro models.
(I did not check out the 15 or 17 inch models at Best Buy...but I intend to go back and see if they are weak also). I want to buy a 15 inch MBP...so I hope that they are solid as a rock as my older MBP.
It appears that the MacBook Air may have a hinge problem.
Mine sure does, exactly as described, see [URL].
Not sure if a lawsuit will fix mine, but if it gets noticed maybe Apple will respond. Anyone else having this problem?
So I just got my MacBook Air (rev A) back from AppleCare after my hinge (like many others', apparently) decided to randomly bust itself. I was very pleased that when I took my MBA to the Apple Store, they didn't bat an eye about replacing the hinge (I'd heard horror stories about Apple denying the part was defective and calling the damage a user error, even with computers covered under warranty). But I was shocked when my package arrived today and the letter inside detailed the parts replaced. Keep in mind, the only thing wrong with my computer (as far as I could tell) was a broken hinge. Here's what they replaced:
Antenna window
Video Display Panel
Camera
Bottom Case
Display Housing
Clutch
Clutch (two different part numbers)
Bezel
Top Case
Logic Board
I want to take it to an Apple Store but doubt they will help me since my AppleCare ran out.
View 5 Replies View RelatedIt seems like the hinge has stiffened up since owning it. Sometimes makes a pop noise when moving it from a non-moving position. I would imagine it's the plastic bezel that's kinda loose and snappy if you touch it at the bottom of the hinge but I dunno. Any one else? I can deal I just hope it doesn't cause damage.
I need this machine to be fully working when I go abroad in the Fall.
I noticed that my basically mint condition Mid2010 MBP's lid started clicking occasionally when I close it. It seems to happen on the left hinge, and only after the screen has been open for a while. Does anyone know what this is indicative of? I'm assuming that it means the screws on the hinge are either too tight or too lose. Should I attempt to fix it myself? I really do not feel like going to an Apple store to get it repaired if it's something simple like tightening a screw (yes, I know that in order to get to the actual lid, you have to do a lot of other disassembly, I've done it before).
View 1 Replies View RelatedIs it normal to have a slight gap between the screen hinge and the body? On right side there is about 1mm and on left side there is 2mm.
You can see it when the screen is open and when its closed on the back.
Ill try to attach pictures later.
But what do you guys and girls think? Does yours have a gap?
My new week old unibody macbook hinge is so tight that when i open it, the rest of the macbook slides back a bit.
I have seen radtech's glide kit to adjust the tightness of the hinge of the old macbooks and powerbooks but nothing has been mentioned of the unibody.
So both of my hinges died and no applecare. So I wanted to see if anyone came up with a DIY solution or know anything about hinges and is it possible to make some little one and maybe for other air users.
There is no way I am paying for a new air or repairing it. Im almost close to getting my Mac Pro.
The only thing on the hinge is Patent number: RE37712
[URL]
Any more info would be nice.
Well I brought my white early 2009 MacBook to apple today because it is cracking at the hinge near the speakers. They told me that the cracking isn't under warranty. Is this true or is only the top case covered? I can post a pic soon. It runs the whole length of the inner part of the hinge.
View 14 Replies View RelatedEverything works perfect except this one thing. Was wondering what you guys thought of this problem. Didnt return it because i was hoping that it would go away with wear in. I checked the back, nothing is coming out of place, its just theres a sound when i open the macbook after its been closed for more than 20 minutes.[URL]
View 22 Replies View RelatedMacbook Pro is fairly new, and the hinge on both side is already making squeaking noise when I open my screen. It gets a bit annoying, I open it from the center top of the screen, not by the side. Is this a problem that I should be taking to the Apple Store? Or this can be fixed easily?
View 2 Replies View RelatedAnyone else have a squeaky hinge on a Rev C or any other? I hear all the talk about lose hinges and broken hinges but the absolute only worry (and it is not a big one) I have about my magnificent two month old Air is the squeak it makes sometimes when I open it up. I suppose that a too tight hinge could lead to a broken hinge but it doesn't sound like the kind of squeak that could lead to breakage. But who knows. If I open it very slowly it doesn't make it. Eventually I'll probably take it in, but not for now. Everything else looks and works too well.
View 3 Replies View RelatedMy hinge problem is much like that of the MacBook Air. I have a good 3/4" of play in my screen before the hinge engages in movement.
My 1 year Apple warranty ended last week and I just noticed this problem now.
I've got a Best Buy warranty (the anything but fully submerged warranty basically), but I don't want to go without my computer for two weeks.
I'm really handy and have a tool for anything, including torx wrenches which I hear you need to fix this.
What I'm getting at is what are the exact steps I need to follow to fix the unnecessary slop in my hinge?
I just got my new white unibody Macbook in the post today and I have one small problem.
When I open the lid the hinge makes a little click noise every time it goes past the vertical position. It doesn't happen when I close it just open.
The noise is very quiet, it's not loud or anything like that. I'm just curious to see if anyone else has had a problem like this before?
I'm pretty sure it's cause the laptop is new and it will just go away but I just wanted to quickly ask on here but I spend all day putting my data on the machine and settings it up.
and lived to tell about it? I'm going to do it tomorrow when im putting a new drive in. My screen is getting loose..
View 1 Replies View RelatedToday I noticed that on my MBA Rev A, right screen hinge got damaged somehow. Wife said she heard a crack when she was closing the screen, and sure enough, something's messed up inside and won't close fully anymore. Screen also won't keep open as firmly as before, as right hinge became loose.The warranty is out since last year, so I tried opening it to see if there's something that I can do. Looks like some part of the hinge is broken. One little metal piece fell out of hinge when I scratched a bit there with a tiny screwdriver.On top of that, just last month my battery stopped holding charge anymore (have to keep laptop plugged in all the time or else it shuts down losing all my work when the battery meter shows ~20% life remaining)
View 7 Replies View RelatedI know this may seem silly to ask, but I have read that the hinge is a bit vulnerable on the macbook pro, & mine will mostly be at home on a desk, but I may occasionally take it out. When I have it at home & shut down for the day, will closing the lid, & then opening it the next day weaken it? could I just leave the lid open when the laptop is shut down at the desk?
View 2 Replies View RelatedSpoke to someone in Apple CR.. They're convinced that a very creaky hinge is within specification? Surely if an issue isn't widespread, it's not acceptable and should be fixed...
View 24 Replies View Relatedwhen ever I open or close my mac book pro the hinge seems to creak. it's intermittent and only creaks once, not constantly when opening or closing it.Anyone else experienced this? I've got apple care, I've had it 2months, I don't really want to use my apple care if it's a common problem. It's not effecting the machine or annoying me, it's just it's allot of money on something if it's not a common thing.
View 12 Replies View Related