having problems with my MacBook Pro. Turns on, straight into user log in. Once password is entered it tries to start up then eventually after grey progress bar has finished brings up a grey screen, then shuts down again.
I've tried starting in safe mode and resetting PRAM etc with no success.
Info:
MacBook Pro, Mac OS X (10.7.2)
My 3 month old macbook pro suddenly has problems booting up. I press power and it goes to the gray screen with the apple logo, the gears start spinning, and then it just shuts off!
Info:
MacBook Pro, Mac OS X (10.7.5)
Well I have managed to get the g5 tower dual 2.5ghz to boot up to the grey screen with the apple logo then it shuts itself down.
View 1 Replies View RelatedI put a new hard drive into my iMac 24". I could not install OS X because every time I turned the machine on it would shut down in less than a minute at the grey screen and Apple logo - whether the disk was in the slot or not. I finally was able to install Snow Leopard via firewire from a Macbook Pro. It runs fine - but I can only access the iMac Snow Leopard installation from the Macbook Pro. When I turn on the iMac, it still shuts down every time. The new drive was formatted with the Disk Utility as an external drive - since I couldn't get to it while it was in the iMac. My Snow Leopard disk was a full version, not an upgrade.
Info:
iMac, Mac OS X (10.6.8)
recently a friend of mine offered to update my 2009 MacBook to Mac osx Lion. when I received the computer back from him, it required a rather large update that has put my MacBook in a terrible state.
upon rebooting from the update, it froze at the grey Apple loading screen, and of course I thought nothing of it and gave it a little restart. Since then I cannot get it past the grey screen or the login window. it seems as though I cannot type in my password or click 'sleep' or any option the window gives me. I've been working on this issue all day, and I've tried countless things from the apple support community, with no avail.
I've tried clearing the cache, I've tried safe mode, I've tried the command+option+control+enter trick on the login page, I'm even trying to boot from the install disc my friend gave me...and it's just refusing to move past the grey screen.
Info:
MacBook, Mac OS X (10.7.3)
When waking from "sleep" the screen appears normal but, the pointer leaves a trail of grey as it moves and the whole screen will turn grey if I keep moving the pointer. The computer is effectively dead. Have to shut down by using power off for six seconds and then re-starting. I know little about computers!
Info:
MacBook Pro, Mac OS X (10.7.3)
before I went to bed, I was playing the Sims 2, when my iBook G4 crashed. Our power cord can be a bit dodgy, so sometimes that happens. I didn't really think about it much, just closed the laptop and went to sleep.Last Monday morning, I opened it and pressed the power button. It began turning on, and got as far as the grey screen with the apple and the spinning circle. And then it just froze. The circle stopped turning.
I freaked out a bit, and restarted it a bunch of times, each time with the same result. (One time it stopped spinning, and then told me a restart was required. Huh. The rest of the times the exact same thing happened though.) I even tried unplugging and removing the battery, but it made no difference. So eventually I just shut it and decided to try again later.Last Tuesday I opened it and pressed the power button without much hope, and again the apple and circle came up just fine, then stopped, but then a bunch of words and numbers popped up.I'm a complete computer noob, but they don't look good to me... or are they good?
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/REEASE_PPC
Macbook Pro 13" (2011) Upon startup, displays a grey screen, then after a few seconds, the logon screen, I would logon, then it would show the Apple White boot screen, then it would ask me to log on again (sometimes)
Info:MacBookPro, Mac OS X (10.7.2)
I have a much loved ibook G4 14" (late 2004??). It has just died. Well, in so much as it won't boot up. The ibook either gets as far as the apple grey screen and hangs, gets to the login screen and hangs, actually loads up finder etc and hangs or none of the above. Sometimes flashing red, blue green black.
After lots of research online over the past few days I tried the following: I have tried safe mode (not working), starting the command prompt screen (single user and verbose modes), started open firmware, and tried booting from a CD. Nothing works as the boot gets so far then hangs. I have flashed the PRam, resetted the NVRam, and have stopped short of opening up the case to dismantle it!
I just really want to access the hard drive now. I have tried Target disk mode and linked the ibook (pressing T) via firewire to a PowerPC G5, but the G5 doesn't recognise the ibook. System profiler on the G5 shows the target mode connected and working fine via firewire, just the icon for the ibook/target doesnt mount on the G5 desktop so I cant access it.Currently the boot freezes within a couple of minutes.I tried the hardware test CD that came with the ibook years ago, I have also tried booting from an OSX Panther CD. I'm assuming they would be bootable.
I forgot to mention that in linking with the G5 in target mode, a disk that I put in the ibook drive appeared on the G5 desktop as an external drive, therefore I wonder why i cannot see the actual ibook drive mounted. The CD drive works as it mounted on the G5.Does the ibook have an actual PRam battery that can be replaced? Maybe this is an issue?Am I able to actually remove the hard-drive and access it as an external drive somehow?
i am using mail v 3.5 and when i try and erase anything from my inbox it just turns grey... then i click out of it and it's still there. does anyone know how to fix? I have tried everyting on this site (apple support)
View 13 Replies View RelatedSo I have a DYNEX 21 inch HD TV conected up to my MBP via the VGA connection route. My problem is that when I want a program (or more specifically in this case a game) to go into fullscreen mode it automatically goes to my primary monitor and turns the other screen black. I know I can switch the primary monitor from my actual laptop screen to the TV however I just want the game to be full screen on the TV while still having access to my dock and everything on my laptop.
View 2 Replies View Relatedgrey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (I think it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.
Info:
MacBook Pro, OS Lion
At least, it seemingly randomly turns off. I can be surfing the web or whatever like normal, but then after a period of time the monitor goes black. I can see that the computer hasn't shut off, but it's as though the computer is on its lowest brightness setting. It can be temporarily fixed some times if I lower the brightness all the way via F1, then put it back up, but if it goes up more than 3 or 4 boxes it goes black again.
It also goes black if I were to move the monitor any time during this whole thing. I've heard things like an inverter cable and board, but I have no idea what's going to fix this. This is my only computer, I use it for all my school work, if it breaks permanently I'm screwed.
I just bought a refurbished macbook pro and at first the screen wouldn't turn on when I started it up, the little sleep light was on though. I pressed and held down a key for a few seconds right after pressing the power button and the screen worked. My question is, should I be worried about this? I got the computer from a company I later found out is really difficult to deal with so I don't want to have to return or exchange it, but I also want to get my moneys worth.
View 2 Replies View RelatedIt happens every now and then that the display light of my MBP late 2011 turns off right after opening it and I only can get it back by hitting F1 and F2.
Info:
MacBook Pro, Mac OS X (10.7.3)
After turning machine on I can hear it powering up but the screen is blank...I can see the little white light on the right lit up!
Info:MacBook, Mac OS X (10.5.2)
I've installed OSX successfully many times but this one, with a new WD disk gives me trouble. After the gray screen is gone and the installation menu starts, the back-light turns off and I can't do anything about it. Any idea why that happens and how I can deal with it? I am working on a Mid 2009 13" Macbook pro with 2.26ghz and 8GB of RAM.
View 5 Replies View RelatedMacbook is charged up. Sounds like it's turning on but no tone. Screen stays black.
Info:
MacBook, Mac OS X (10.7.3)
There is also no display when hooked up to external monitor. No display when started in safe mode. No display when started with PRAM reset either.
Info:
MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.5.8)
Mac pro has a gray screen with apple logo running pinwheel but wont load up. Tried shutting it down and restarting a couple of times with no success
Info:
MacBook Pro
I can hear the chime going off, but the display turns on you cannot see through naked eye, you have flash light onto to the screen to see very little, can you tell me why this is happening and how to fix this issue. Secondly, can you tell me how to fix this issue, my keyboard and trackpad doesn't work. Is it the problem of flex cable of both the keyboard and trackpad or is the related to software
Info:
MacBook Pro, OS X Mavericks (10.9.4)
My macbook pro late 2009 (10.6.7) when i press the power button it turns on, then it turns off by itself and then on again and gets a black screen and nothing more no booting sound and i just hear the fans or the Hard Drive going...
Info:
MacBook Pro, Mac OS X (10.6.7)
my computer turns on but there is only a black screen. i hear the sounds and am able to press buttons but nothing is seen. how to I fix this?
Info:
MacBook Air, OS X Mountain Lion (10.8)
My mac book pro seems to turn on and load with a dim screen, but turns off after that. I've tried the shift method but it still doesn't work ...
Info:
MacBook Pro
My screen is black but my laptop is not off.. and its not that only the screen is black, my mac on sleep (i think)...When I turn my mac on, it does turn on.. The starting screen comes out.. but the moment the desktop opens, the screen goes black. And if I try to wake my mac up by pressing any key, the mouse shows for like three seconds(on the black screen, not my desktop). So that means that my mac is not totally off, it's just that the screen is black. But once in a while, when I press any button, my desktop shows for five seconds and the screen turns black again. I had yesterday was that the finder was keep restarting. I was still able to go on all the apps except that I could not open any files on my desktop.
View 1 Replies View Relatedmy MBP is really screwing up these days. Basically the best way I can describe it is that randomly once in awhile (no matter what I'm doing, usually surfing the net) the screen flickers a few times, then most of it turns black (except usually for a small part on top that stays on whatever it was displaying before). The section between the part that stayed the same and the bottom is sort of "multicolored".
The computer does not respond to anything except holding the power button down for 5 seconds until it shuts off. If I try to adjust brightness or sound level, nothing happens. Anyway, I took it in to apple and they claimed it was the motherboard, so they replaced it. But today I had the problem again! What else could it even be? Any chance its the RAM/screen/hard drive?
Every time I moved my MacBook Lid my screen turns off and starts to flicker? Is there anyway you think i will get covered I haven't got any warranty left in it either.
View 3 Replies View Related[URL ]and i connected it just the right way. my tv says no signal. what is wrong? it doesn't get it. Macbook pro says nothing bt screen turns blue for an instant when i disconnect it. i click detect displays and nothing happens.
adittional info;
mbp is 15" 2010 i5 2.4 ghz
tv is samsung led tv bought in september 2009.
I am on a 17" macbook pro using lion and my laptop wont go to sleep. I shut the lid and the screen turns off but I hear it still going and the light in the front doesn't begin to blink like it is suppose to. I have reset the pram and the smc and its still not working
View 7 Replies View RelatedMy MacBook Pro is turning on to startup screen with apple icon and loading signal, but then after a few minutes the screen just turns white. What is wrong?
View 1 Replies View Related