I've installed OSX successfully many times but this one, with a new WD disk gives me trouble. After the gray screen is gone and the installation menu starts, the back-light turns off and I can't do anything about it. Any idea why that happens and how I can deal with it? I am working on a Mid 2009 13" Macbook pro with 2.26ghz and 8GB of RAM.
View 5 RepliesMy Air's screen is slightly darker at the bottom (only on a few millimeters, but still). It only happens on a white/light background though (I don't have my dock at the bottom). In comparison, the screen of my MacBook has a very uniform backlight. Does anybody else have this issue?
View 2 Replies View RelatedI kept my macbook (late 2008) turned on overnight on lowest brightness and when I tried turning the brightness back on this morning, the backlight flashed on for less than a second and then turned off again. Somehow I managed to get it to work, but whenever I move my macbook even slightly the problem reoccurs. I've done some research on my problem and I suspect that it's hardware related (maybe the inverter or the inverter cable?), but maybe the LCD itself is broken? Does anyone else have any experience with this?
View 1 Replies View RelatedSo I have a DYNEX 21 inch HD TV conected up to my MBP via the VGA connection route. My problem is that when I want a program (or more specifically in this case a game) to go into fullscreen mode it automatically goes to my primary monitor and turns the other screen black. I know I can switch the primary monitor from my actual laptop screen to the TV however I just want the game to be full screen on the TV while still having access to my dock and everything on my laptop.
View 2 Replies View RelatedI read on the internet that this is probably caused by lightbult or inverter board, but that information was on macbook or macbook pro, i couldn't find any information if its the same issue with macbook airs.. Has somebody had similar situation? How have you solved this issue?
View 7 Replies View RelatedI have a 2008 White body model Macbook with 2 gigs of ram and 2.1 core duo processor. My problem is that the screen won't turn on...when I start up my computer it lights up for a second, but turns off before the apple sign shows up. If I look really close I can see everything. Oddly enough, if I press the brightness button so to decrease the brightness to the very last bar and then hit the f2 button to turn up the brightness by one, the light will turn on for a few seconds, if i continually go back and forth, I can sort of use it enough to do something with it (thank god because I had all my work for school on it). I have included a link with this thread so you can see what I mean.
View 4 Replies View RelatedI have had my Macbook for almost three years now, and for the last month, the backlight for my screen has gone off. However, when I put the brightness down to 0 when the light is off, and put it up by 1 it sometimes turns on for a couple minutes/seconds/hours. Any help? By the way, I am using Boot Camp, I do not know if this happens on my Mac Side, because it comes up with a "stop" sign when I try to boot it up.
View 3 Replies View RelatedI own a macbook pro unibody A1286. I spilled some soda on it and I followed everything that you would do when a liquid spill happens. After a few days I turned on the macbook pro and I hear the charm and can see the screen with light on it. The back light had gone out on the unit. At first I thought It would be the screen, so I ordered a new screen and tried it out. With the new screen it is the same, the back light for the lcd wont turn on. Everything else on the macbook pro is functional except for the back light.
I even own a mini display port to HDMI adapter and hooked that up to my TV and it worked perfectly. The isight camera works, all the ports work, speakers work, optical drive works. Just the Back light on the LCD does not.
I've had my new 13" MBP for about a month now and I am noticing what looks like backlight bleeding spots at the bottom of my screen. It is most noticeable on the bottom left and appear blue-ish on a black screen at maximum brightness. It is getting irritating when I am watching movies at night. I have the 9CBD screen. Others have said they have no problems with this screen model. So is this normal or is it a defect? If it is a defect, what can I do to fix this? My 14 day grace period is over, so I'm assuming an easy exchange at the Apple Store is out of the question?
View 6 Replies View Relatedi dropped my macbook. The screen was not responding any more but the backlight was still working. Now, i have opened up my macbook, because my insurance company gave me a new one. There is nothing i can see that is changed. So what is the problem here? I am not waiting to bring it to the store with a respond: It will cost you a 1000 dollar.
View 5 Replies View RelatedI have just replaced the display panel in my MacBook Pro (A1260) and now it is behaving oddly at startup. The backlight lights up normally until the boot process gets to the Login screen, at that point the LEDs shut off. I can see the images on the display, (the LCD seems OK,) the only issue is that the LEDs are turning off.
Here's what I've tried:
1) If I boot in Target mode, the screen stays lit. (As expected.)
2) If I reset PRAM, the lamp behaves normally, staying on through that session. If I restart, the lamp-off- condition returns.
3) I have reset the SMC per instructions here, [URL]. No change, LEDs shut off.
Info:
MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.6.8)
It seems my MBA has developed some issues with the LCD, there is a noticeable dark patch on the bottom of the screen and it is really bugging me, normally little things like these I can get over with but seeing how much I paid for this laptop it is very disconcerting. Oh and also, when the screen is off and viewed under a sun/bright light, you can see waves / "ripples" of the LCD, is that supposed to be normal? Just wondering if Applecare will "care" about this issue.
View 5 Replies View RelatedA month or so ago, the backlight randomly went out on our MacBook. If you look very closely you can see the screen, but it's like you've got the brightness on its lowest setting. The backlight comes on as normal when you turn on the computer, or wake it from sleep, but goes out after about 2 minutes. Other than not being able to see what's going on, the computer works fine. I took it to the Apple Store, who said they'd have to replace something at a cost of ?75, which was fine. Just over a week later, they called and said that hadn't worked, and that it was actually the logic board that needed replacing, at a cost of ?385, more than the value of the computer. We decided it wasn't worth it.
Yesterday however, I took it to a friends and connected it to his monitor, and even though the screen was dark on the MacBook, it came up fine on the monitor. To me, it seems strange that it's a logic board issue when it works fine with an external display.
this is my first time posting,so my bad if i do anything wrong.
My backlight doesn't work when i tilt the screen less than 90 degrees. is there anything i can do besides take it to the apple store? I'd rather my dad didn't find out
I just noticed that on a black background, my 17" i7 MacBook Pro has two areas in the lower middle area of the screen, where the backlight is too bright compared to the rest of the screen. It is very noticeable on a black background and grey.. Is anyone else having this problem?
Other things I noticed:
- there was dust on the plastic cover that you take off the case when you use it for the first time
- the aluminium enclosure was slightly dirty, could be rubbed off though..
- there are two minor 'impurities' in the aluminium (?!).. two tiny grey spots/blemishes basically
- there were a few minor scratches on the aluminium casing.
- the apple logo at the back glows in a much warmer (yellow-ish) colour than the previous generation mbp (?!)
- the screen seems not as bright as the previous generation
- the keyboard backlight seems not as bright as the previous generation
My 2009 MBP would have problems shutting down or restarting. On a shutdown, it would appear to off, black screen and no lights, but if you tried pressing the power button nothing happened. I had to hold the power button to turn it completely, then press it again to startup.Restarts had the same behaviour, it would get to a black screen and I would have to hold the power button and then press it again to startup.I ended up taking this MBP back for another problem, and they replaced it with a 2011 MBP (since I had recurring logic board that failed a few times).Anyway, I swapped the SSD from my old mac into the new one, and I have the exact same behaviour!!Seems to be some corrupt settings or something. So I booted from a Mac installation disc, wiped my hard drive and reinstalled the OS, then I restored from Time Machine, and unticked the option to restore settings.I want to also add, that my backlit keyboard isn't working either.I tried resetting the SMC, but the power light on my charger didn't cycle orange/green, so I'm not sure if it worked. I tried multiple time, following Apple instructions.I also reset the PRAM, which did work.
Info:
MacBook Pro (17-inch, Late 2011), Mac OS X (10.7.3), 16GB RAM, OCZ Vertex 3 Max IOPS 240
At least, it seemingly randomly turns off. I can be surfing the web or whatever like normal, but then after a period of time the monitor goes black. I can see that the computer hasn't shut off, but it's as though the computer is on its lowest brightness setting. It can be temporarily fixed some times if I lower the brightness all the way via F1, then put it back up, but if it goes up more than 3 or 4 boxes it goes black again.
It also goes black if I were to move the monitor any time during this whole thing. I've heard things like an inverter cable and board, but I have no idea what's going to fix this. This is my only computer, I use it for all my school work, if it breaks permanently I'm screwed.
I just bought a refurbished macbook pro and at first the screen wouldn't turn on when I started it up, the little sleep light was on though. I pressed and held down a key for a few seconds right after pressing the power button and the screen worked. My question is, should I be worried about this? I got the computer from a company I later found out is really difficult to deal with so I don't want to have to return or exchange it, but I also want to get my moneys worth.
View 2 Replies View RelatedIt happens every now and then that the display light of my MBP late 2011 turns off right after opening it and I only can get it back by hitting F1 and F2.
Info:
MacBook Pro, Mac OS X (10.7.3)
After turning machine on I can hear it powering up but the screen is blank...I can see the little white light on the right lit up!
Info:MacBook, Mac OS X (10.5.2)
Macbook is charged up. Sounds like it's turning on but no tone. Screen stays black.
Info:
MacBook, Mac OS X (10.7.3)
There is also no display when hooked up to external monitor. No display when started in safe mode. No display when started with PRAM reset either.
Info:
MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.5.8)
Mac pro has a gray screen with apple logo running pinwheel but wont load up. Tried shutting it down and restarting a couple of times with no success
Info:
MacBook Pro
My 3 month old macbook pro suddenly has problems booting up. I press power and it goes to the gray screen with the apple logo, the gears start spinning, and then it just shuts off!
Info:
MacBook Pro, Mac OS X (10.7.5)
I can hear the chime going off, but the display turns on you cannot see through naked eye, you have flash light onto to the screen to see very little, can you tell me why this is happening and how to fix this issue. Secondly, can you tell me how to fix this issue, my keyboard and trackpad doesn't work. Is it the problem of flex cable of both the keyboard and trackpad or is the related to software
Info:
MacBook Pro, OS X Mavericks (10.9.4)
My macbook pro late 2009 (10.6.7) when i press the power button it turns on, then it turns off by itself and then on again and gets a black screen and nothing more no booting sound and i just hear the fans or the Hard Drive going...
Info:
MacBook Pro, Mac OS X (10.6.7)
my computer turns on but there is only a black screen. i hear the sounds and am able to press buttons but nothing is seen. how to I fix this?
Info:
MacBook Air, OS X Mountain Lion (10.8)
having problems with my MacBook Pro. Turns on, straight into user log in. Once password is entered it tries to start up then eventually after grey progress bar has finished brings up a grey screen, then shuts down again.
I've tried starting in safe mode and resetting PRAM etc with no success.
Info:
MacBook Pro, Mac OS X (10.7.2)
My mac book pro seems to turn on and load with a dim screen, but turns off after that. I've tried the shift method but it still doesn't work ...
Info:
MacBook Pro
My screen is black but my laptop is not off.. and its not that only the screen is black, my mac on sleep (i think)...When I turn my mac on, it does turn on.. The starting screen comes out.. but the moment the desktop opens, the screen goes black. And if I try to wake my mac up by pressing any key, the mouse shows for like three seconds(on the black screen, not my desktop). So that means that my mac is not totally off, it's just that the screen is black. But once in a while, when I press any button, my desktop shows for five seconds and the screen turns black again. I had yesterday was that the finder was keep restarting. I was still able to go on all the apps except that I could not open any files on my desktop.
View 1 Replies View Related