MacBook Pro :: Das Keyboard Not Recognized Running Snow Leopard 10.6.8
Apr 23, 2012
I've just got the Das Keyboard Ultimate Model S for my 2009 MacBook Pro, running Snow Leopard 10.6.8. I'm using the USB port to connect the keyboard, and the first time I plugged it in, the computer asked me to hit the first key to the right side of the left Shift key, which is pretty standard whenever a new keyboard is plugged into the Mac. It recognized it as a European ISO standard, which it is.
However since then my Mac no longer recognizes it as that kind of keyboard. When I go into the "Show Keyboard Viewer", the keyboard is recognized as a US Standard layout, and an Apple keyboard as well (meaning it doesn't "see" the numpad). You can see it's a US standard keyboard, as the Enter key is horizontal, and the left Shift key is wider. (the rest of the layout is Danish, which shouldn't matter in this case).
How do I tell my Mac that this isn't the correct keyboard? I've resetted the SMC, PRAM and NVRAM. I've tried to find and delete the file "com.apple.keyboardtype.plist" in my Library -> Preferences folder, but for some reason I don't have that file. I've plugged the keyboard into my iMac, running the same OS, and here the keyboard is recognized correctly, so it's not the keyboard that's faulty.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.6.8), Das Keyboard Ultimate Model S
Computer info: MacBook Pro 15.4/2.8/2X2GB/500/SD; 2009, running Snow Leopard 10.6.8, MATSHITA DVD-RÂ Â UJ-868
I have used CD's and DVD's before on this computer with this OS, without any problems
Now:all CD's show up as untitled, show as having no content, and are listed with burn symbolCommercial DVD worksDVD's made by professional videographers (school event) are ejected
All of the above are readily read and DVD's played, title and content, by my old PowerBook G4, running 10.3.9Â
I seldom use CD's or DVD's, so do not know how long this problem has existed, or what may have precipitated the problem.Â
Info: MacBook Pro (15-inch Mid 2009), Mac OS X (10.6.8), MATSHITA DVD-R UJ-868
So I've concluded that the reason my wireless keyboard is not registering the correct keystrokes on my Macbook Pro is due to the fact that Snow Leopard sees it as the OLD white wireless keyboard instead of the new aluminum one. Is there any way to ensure that it sees the keyboard as the aluminum one rather than the white one every time I hook it up?
My main concern is that the function keys don't do the correct thing. I've tried remapping them (but can't control the volume ones) and have tried using the checkbox that requires a push of the fn key. Trouble is, since the white wireless keyboards don't have an fn key, it won't recognize it as such on my aluminum.
how to make the computer see the keyboard correctly?
I bought an iMac on dec, 2010 it came with snow leopard and a wired aluminum keyboard, everything was good until dec, 2011 when my keyboard suddenly stopped working, I took it to an apple store and they replaced it, everything was fine until last month when my new keyboard stopped working again.
I have an old macbook (1st gen of intel-based macbooks) and if I connect the keyboard to that macbook it works just fine, I have checked and all the USB ports on my iMac and they work but when I connect the keyboard it just doesn't recognizes it as a keyboard (or as anything because it doesn't show on system profiler). I have connected another keyboard I own (a logitech wireless one) and the imac recognizes it, I don't know what to do.
Btw, if I disconnect the keyboard for a day or two it works again when I connect it to the iMac, also If I use the USB ports attached to the keyboard I get an error that the USB is taking too much power and it shuts down (and then the keyboard stops working again on the iMac)
When I click the .dmg to open it, It comes up with this.[URL] This file came from Parts, I have checked all the parts and none of them are corrupted.I have tried Re-Downloading and Other stuff but nothing has worked yet.
I formatted my 8GB USB stick on my Mac Snow Leopard and initially decided to try a '35-Pass Erase' but, after seeing that it would take approximately ten hours to complete this I cancelled it. I was then presented with: 'The disk you inserted was not readable by this computer'. Now when I insert my USB stick the computer does not recognise it apart from in 'Disk Utility' and I am unable to successfully format or partition the drive. I have also attempted to insert the USB in another USB slot on my computer to see if this would make any difference but I was presented with the same problem.Â
We have a MAC Pro Tower with 2 older printers connected to it via ethernet (through our AT&T 2-Wire DSL/Router). We have a Xerox Phaser 6300N & an old Apple LaserWriter 12/640 PS.We have been running Leopard for quite a while with this setup & no problems. When we finally were able to upgrade to Snow Leopard which I installed on Thursday, 5/31/12.Now, our printers are not recognized at all. I've reinstalled & redownloaded the Xerox drivers about 5 different times,tried unplugging the printer from the router & plugging it into the back of the computer directly.  Our speakers also did not work either, which was just a quick fix in the sound setup in Systems Preferences. Â
I finally called Apple Tech Support -- they had me reset the PRAM, then I was booted up to a Senior Tech guy that upon learning that the printers were connected via ethernet that "Apple could not help me as they are only trained & able to troubleshoot USB connections".Â
Now, I know that I am not the only one out there that has older printers connected to their MAC, and since the trouble started as soon as I installed Snow Leopard, there must be a solution -- perhaps a setting that was reset to the default when we upgraded or if Snow Leopard is not compatible with ethernet will a ethernet/USB converter do the job? I have even found an article about how to create a driver for the LaserWriter to work with SnowLeopard ... but the printer has to be recognized first.Â
My sd card adapter is not recognized on my imac with os 10.7.3. I cannot see where I can download the photos in iphoto. How can I find out if recognized by computer
Info: iMac, Mac OS X (10.7.3), sd card adapter not recognized in
I have an Epson NX 510 printer that I have been able to print on easily up until a few weeks ago. I have upgraded my Macbook Pro to OS X Lion so I got new printer software and still my computer wouldn't recognize the printer all the time. Sometimes I can print and sometimes I can't. What can I do?
I see SanDisk has just shipped it's new SSD product and it is qualified with Mac OS Snow Leopard. If I purchase the SSD is it possible to put it in my 2007 MacBook Pro running Snow Leopard? Would an Apple Store do that for me or would I need to go to a 3rd party vendor?
I have a MacBook 13" 2.0 GHz with 1 GB Ram and a 80GB harddrive 2006 model. This machine recognizes all ram, DVD, Hard Drive and ng usb etc. seems to work perfectly. BUT, it will only startup if I HOLD the PowerButton down all the way down until I see the the Apple Logo. If I just hit the powerbutton and go, it will t reboot over and over and over. I have bought new ram, nope. I tried a different HD, nope. I disconnected the DVD, nope. It simply won't boot properly. Once I HOLD down the power button to get it running it works fine, sees the camera, BT, WIFI, clock is at right time, all keys on KB work, and usb peripherials. I cannot reset the pram or vram at all, even while holding the power button down to boot. If I just hit the button and quickly press Command option p r it just reboots like always. Does anyone have any ideas??? I'm at a loss as it works fine once booted. While holding the power button to boot it I see my front led flashing and then hear the several beeps and it starts up just fine.
I have pulled the battery, removed the PSU, held the power button for a whole minute battery or power and let it sit overnight like this but nada, still does this.
I have a 3rd Party NAS (Iomega Home Media Network Cloud Edition 2TB) and MacBook with OSX 10.6.8. I did run a first TM full backup over Ethernet (around 240GB) because of the extremely slow transfer speed over WiFi via the AirPort. It went Ok (after several tries and reading here in the forum). Then, I disconnected my MacBook from the wired network, so futures frequently backs-up happen wirelessly, however, it seems that it did not recognize the first full back-up, asked for re-doing it again from scratch and erased my first full-backup-over-Ethernet.
I've seen that the MAC address is used as part of the sparse bundle file name; obviously, there will be a conflict here because Ethernet and AiPort do not have the same MAC address (of course !).I will run a brand new full first backup over Ethernet, but I'd like to know what do I have to do for getting it recognizable for futures backups over AirPort?
I have a MBP 13" 2009, and had a HDD fail yesterday. I have an external HDD for backups with timemachine (WD 1Tb), with daily backups.I bought a new internal hdd, plugged it in today, and when presented with the install options, I selected recover from backup. There, my drive appears (in yellow), but when pressing continue, I get a message: No system backups found.
I looked around on forums and people suggested that a normal installation should be done followed by migration assistant. When I try using migration assistant and select Time Machine backup, the next page just shows up empty with a rotating thing in the middle.
When I browse the Backups.backupdb folder, everything is there, including my last backup from Saturday. I see that I can recover my files, which obviously is the most important bit, but I would like to restore Applications, settings etc, as to not waste too much time.Â
I just got the replacement battery from Ebay seller from China claiming it is the genuine battery. I am using it right now, when I plug the ac connector it doesn't turn red to show me that it is charging or something also the battery icon is showing an X but the battery is still running. I paid $60 for it.
A few days ago, I found my macbook running slow. The starting time used to be 2+ min but slow down to 10+ min. I tried to reinstal by installation DVD but the time bar showed 5+ hours required. I restarted the macbook and tried to format the HD, after proper steps taken, the time bar showed 17 days. Instead booting from the system, I tried to boot direct from my installation DVD.
After formatted the HD and re-instal the system, the MacBook seems running smooth again. But after installation of other programs, the same problem recurred. The system was getting slow. Re-starting it required waiting over 10 minutes. I tried to re-format the HD and installed the system again but still doesn't work. Under the disk utility "first aid" scanning through the HD, it showed "Invalid key length." and "The volume Macintosh HD could not be verified completely."
When I plug the disk in an USB port in the MBP, the light that indicates operation starts blinking but very lighltly colored and the disk is not recognized by the computer. I have put data on it using iMac Snow Leopard. I have plugged the disk into a MBP running Snow Leopard and it works. I have also tried another Lion (older MBP) and it also works.Â
How come the disk is not mounted or shown in Disk Utility. Can it be a power issue?
I have noticed there a lot of similar posts in the forum and none has been satisfactorily solved. Is this a mayor Lion bug? If yes, how can I downgrade to Snow Leopard?
Recently I bought a new mouse, I was overexcited and plugged it in, and there was a pop up saying there was a new keyboard but I clicked "Contine" this mouse doesn't work at all now, I thought it doesn't support mac at all! I searched about it on the net, they said that when they got that same pop up, they click "x" at the top left corner, you now, exits the pop up and got to use the mouse immediately. I tried it at my dad's laptop, got the same pop up but instead of clicking continue, I clicked "X" The mouse Works. So now I think this mouse is recognized as a keyboard on mine.
I've tried but it is recognized as a keyboard and ask me to type the passcode and then the enter key. How could I type the passconde on the controller?Here's a screen shot of the popup window when I press the PS button on the controller:I'm using a MacBook Pro early 2011 with Lion version 10.7.3.The Bluetooth chipset is Broadcom (version 4.0.3f12).Â
Is there a free way to run/emulate OS X Snow Leopard while running Leopard?
I had a billion problems when I upgraded to Snow Leopard but some software that I don't use frequently only works with it so I want to be able to run those apps while still staying in my less buggy OS X Leopard.
I don't want to have dual boot operating systems. OS X Leopard 10.5 is my primary OS.
As all of you know, according to Apple, Snow Leopard runs only on Intel chips. Also, as a lot of you know, PPC and Intel versions of OS X report themselves as such, ie PPC 10.5, Intel 10.5 and so on...
Yesterday, as I was looking over my traffic logs, I found something quite interesting...
"PPC 10.6"
I got one visit right after the day of WWDC, and another visit just 2 days ago...
Someone just spoofing what their machine reports? Or someone running an an early internal build of SL during which time maybe they had multiple versions?
MDS is running at 97-100% CPU. What could be the causes?
running 10.6.8Â
$ ps auxww | grep mds
root    16182 97.8 8.6 3737612 362636  ?? Rs  Tue06AM 179:03.22 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Support/mds
I just opened up Activity Monitor to force quit an app, and to my surprise I have two processes that are running as 64-bit. I thought this was a Snow Leopard thing?
