Intel Mac :: USB Not Recognized By Snow Leopard?
Jun 7, 2012
I formatted my 8GB USB stick on my Mac Snow Leopard and initially decided to try a '35-Pass Erase' but, after seeing that it would take approximately ten hours to complete this I cancelled it. I was then presented with: 'The disk you inserted was not readable by this computer'. Now when I insert my USB stick the computer does not recognise it apart from in 'Disk Utility' and I am unable to successfully format or partition the drive. I have also attempted to insert the USB in another USB slot on my computer to see if this would make any difference but I was presented with the same problem.Â
Info:
iMac, Mac OS X (10.5.8)
View 3 Replies
ADVERTISEMENT
Jun 2, 2012
When I click the .dmg to open it, It comes up with this.[URL] This file came from Parts, I have checked all the parts and none of them are corrupted.I have tried Re-Downloading and Other stuff but nothing has worked yet.
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Jun 5, 2012
We have a MAC Pro Tower with 2 older printers connected to it via ethernet (through our AT&T 2-Wire DSL/Router). We have a Xerox Phaser 6300N & an old Apple LaserWriter 12/640 PS.We have been running Leopard for quite a while with this setup & no problems. When we finally were able to upgrade to Snow Leopard which I installed on Thursday, 5/31/12.Now, our printers are not recognized at all. I've reinstalled & redownloaded the Xerox drivers about 5 different times,tried unplugging the printer from the router & plugging it into the back of the computer directly.  Our speakers also did not work either, which was just a quick fix in the sound setup in Systems Preferences. Â
I finally called Apple Tech Support -- they had me reset the PRAM, then I was booted up to a Senior Tech guy that upon learning that the printers were connected via ethernet that "Apple could not help me as they are only trained & able to troubleshoot USB connections".Â
Now, I know that I am not the only one out there that has older printers connected to their MAC, and since the trouble started as soon as I installed Snow Leopard, there must be a solution -- perhaps a setting that was reset to the default when we upgraded or if Snow Leopard is not compatible with ethernet will a ethernet/USB converter do the job? I have even found an article about how to create a driver for the LaserWriter to work with SnowLeopard ... but the printer has to be recognized first.Â
Info:
Mac Pro (Early 2008), Mac OS X (10.6.8)
View 4 Replies
View Related
Dec 4, 2014
Computer info: MacBook Pro 15.4/2.8/2X2GB/500/SD; 2009, running Snow Leopard 10.6.8, MATSHITA DVD-RÂ Â UJ-868
I have used CD's and DVD's before on this computer with this OS, without any problems
Now:all CD's show up as untitled, show as having no content, and are listed with burn symbolCommercial DVD worksDVD's made by professional videographers (school event) are ejected
All of the above are readily read and DVD's played, title and content, by my old PowerBook G4, running 10.3.9Â
I seldom use CD's or DVD's, so do not know how long this problem has existed, or what may have precipitated the problem.Â
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.6.8), MATSHITA DVD-R UJ-868
View 4 Replies
View Related
Mar 3, 2012
Wireless keyboard is not recognized by my iMAC OSX 10.6.8
Info:
MacBook Air, Mac OS X (10.6.8)
View 1 Replies
View Related
Apr 23, 2012
I've just got the Das Keyboard Ultimate Model S for my 2009 MacBook Pro, running Snow Leopard 10.6.8. I'm using the USB port to connect the keyboard, and the first time I plugged it in, the computer asked me to hit the first key to the right side of the left Shift key, which is pretty standard whenever a new keyboard is plugged into the Mac. It recognized it as a European ISO standard, which it is.
However since then my Mac no longer recognizes it as that kind of keyboard. When I go into the "Show Keyboard Viewer", the keyboard is recognized as a US Standard layout, and an Apple keyboard as well (meaning it doesn't "see" the numpad). You can see it's a US standard keyboard, as the Enter key is horizontal, and the left Shift key is wider. (the rest of the layout is Danish, which shouldn't matter in this case).
How do I tell my Mac that this isn't the correct keyboard? I've resetted the SMC, PRAM and NVRAM. I've tried to find and delete the file "com.apple.keyboardtype.plist" in my Library -> Preferences folder, but for some reason I don't have that file. I've plugged the keyboard into my iMac, running the same OS, and here the keyboard is recognized correctly, so it's not the keyboard that's faulty.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.6.8), Das Keyboard Ultimate Model S
View 3 Replies
View Related
May 5, 2012
My sd card adapter is not recognized on my imac with os 10.7.3. I cannot see where I can download the photos in iphoto. How can I find out if recognized by computer
Info:
iMac, Mac OS X (10.7.3), sd card adapter not recognized in
View 1 Replies
View Related
Jun 21, 2012
I just migrated to OS 10.6.8 and my hp scanjet 3670 is not recognized. Is it a paper weight now?
Info:
Mac Pro, Mac OS X (10.6.8), hp scanjet 3670
View 3 Replies
View Related
Mar 4, 2012
I have an Epson NX 510 printer that I have been able to print on easily up until a few weeks ago. I have upgraded my Macbook Pro to OS X Lion so I got new printer software and still my computer wouldn't recognize the printer all the time. Sometimes I can print and sometimes I can't. What can I do?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Nov 7, 2009
So I've concluded that the reason my wireless keyboard is not registering the correct keystrokes on my Macbook Pro is due to the fact that Snow Leopard sees it as the OLD white wireless keyboard instead of the new aluminum one. Is there any way to ensure that it sees the keyboard as the aluminum one rather than the white one every time I hook it up?
My main concern is that the function keys don't do the correct thing. I've tried remapping them (but can't control the volume ones) and have tried using the checkbox that requires a push of the fn key. Trouble is, since the white wireless keyboards don't have an fn key, it won't recognize it as such on my aluminum.
how to make the computer see the keyboard correctly?
View 2 Replies
View Related
Feb 5, 2012
I have a 3rd Party NAS (Iomega Home Media Network Cloud Edition 2TB) and MacBook with OSX 10.6.8. I did run a first TM full backup over Ethernet (around 240GB) because of the extremely slow transfer speed over WiFi via the AirPort. It went Ok (after several tries and reading here in the forum). Then, I disconnected my MacBook from the wired network, so futures frequently backs-up happen wirelessly, however, it seems that it did not recognize the first full back-up, asked for re-doing it again from scratch and erased my first full-backup-over-Ethernet.
I've seen that the MAC address is used as part of the sparse bundle file name; obviously, there will be a conflict here because Ethernet and AiPort do not have the same MAC address (of course !).I will run a brand new full first backup over Ethernet, but I'd like to know what do I have to do for getting it recognizable for futures backups over AirPort?
Info:
MacBook, Mac OS X (10.6.8)
View 12 Replies
View Related
May 30, 2012
I have a MBP 13" 2009, and had a HDD fail yesterday. I have an external HDD for backups with timemachine (WD 1Tb), with daily backups.I bought a new internal hdd, plugged it in today, and when presented with the install options, I selected recover from backup. There, my drive appears (in yellow), but when pressing continue, I get a message: No system backups found.
I looked around on forums and people suggested that a normal installation should be done followed by migration assistant. When I try using migration assistant and select Time Machine backup, the next page just shows up empty with a rotating thing in the middle.
When I browse the Backups.backupdb folder, everything is there, including my last backup from Saturday. I see that I can recover my files, which obviously is the most important bit, but I would like to restore Applications, settings etc, as to not waste too much time.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
View 4 Replies
View Related
Jul 15, 2010
I have a Macbook pro 17" 2008 model, and I just bought a new 160gb Intel X-25m solid state hard drive. I installed it into the mac with no problem, but when I boot up with the OS boot disc 1, the drive doesn't show up in the "destination" screen. No drives are there. When I open Disk Utility the drive is there, and shown as read/write, but when I boot with option held down the drive isn't there either. I can't even do any repairs on the drive in the disk utility.
View 4 Replies
View Related
May 5, 2012
how can i redownload snow leopard after reinstalling an old version of leopard from disks?I have a mobileme account and an icloud account?
Info:
iMac, Mac OS X (10.5.8)
View 1 Replies
View Related
Apr 3, 2012
after entering the password to log in to my 2011 iMac, the screen turns blue and returns to the log in screen. I can log into alternate accounts okay.
View 2 Replies
View Related
Oct 28, 2009
We are using Mac OS X Version 10.3.9 with a 1.25 GHz PowerPC G4 here and cannot upload the latest version of Safari, Skype, Quicktime 7, and are having difficulties with an airline booking website - probably because of the above. Would like to upgrade to Snow Leopard but this OS want us to have an Intel processor (think?) so not exactly sure if this is possibly because of the version of Mac processor we have.
View 4 Replies
View Related
Feb 24, 2012
I recently tried to use my final cut express program and it would not open.I called Apple and I was told that it ran in my older iMac because I had Snow Leopard installed in it and I upgraded to Lion, now, my new iMac doesn't have Snow Leopard in it and Im out of luck. Not only do I like FCE, I learned to use it and I want to continue doing so, I bought it from the Apple store and later I also purchased the upgrade, can I have both OS's in my mac and choose the start up disk like I did iwth OS9 and OSX?
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
View 5 Replies
View Related
Mar 5, 2012
iChat is essential for its Screen Sharing capability. I presume that iMessage offers same. I am "stuck" on Snow Leopard because I have an important (and expensive) 4D application that runs PPC code. I would rather not move from Snow Leopard.
Info:
iMac, Mac OS X (10.6.8)
View 2 Replies
View Related
Apr 22, 2012
I'm trying to put Snow Leopard on a partition. I have Lion installed on my main disc and when I try to boot from the snow leopard disc I get the 3 beep sounds. I've done this before I just don't remember how. It won't let me boot from the partition.
View 4 Replies
View Related
May 13, 2012
iMac freezing in Snow Leopard, several times a day, screen with turn a single color (blue, green, gray), and I have to hard boot
Info:
iMac, Mac OS X (10.6.3)
View 2 Replies
View Related
May 16, 2012
Am updating my current IMac to Snow Leopard and have received all the parts to do it. Do I replace the current memory or do I simply add the two new memory cards to the computer.
Info:
iMac, iOS 5.1, Intel Core2 Duo
View 1 Replies
View Related
May 20, 2012
My iMac / Snow Leopard is very slow. Any cleaner recommendations?
Info:
iMac, Mac OS X (10.6.8)
View 2 Replies
View Related
Jun 12, 2012
I want to upgrade my iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with my purchase of the 15" MacBook Pro that totally died, and upgrade the iMac from that DVD that came with the laptop ?
View 2 Replies
View Related
Feb 7, 2010
I'm thinking about splitting the cost of a family pack with a couple friends and want to know what you all think about running Snow Leopard on a 2.16 Intel Core Duo Macbook Pro with 2 GB of ram and 100 GB HD. Will it be run smoothly and correctly? Has anyone done this? Any info will be greatly appreciated!
View 5 Replies
View Related
Jan 12, 2011
I bought a Mac Mini on ebay and it came with snow leopard already installed. Its been working great but today, i decided I want to swap the 80gb drive for the old 320gb drive from my laptop (the laptop got a shiny new SSD). Problem is, when i try to boot from the 10.6.2 install disc, it says that snow leopard cannot be installed on this Mac. Any way i can get it to install Snow Leopard on the new drive?
Also, I tried running the installer on the old HDD from inside the old Snow leopard install and it also said that it could not install snow leopard. It then asked me to restart and kept attempting to install Snow leopard and failing.
specs of Mac mini:
-Model Identifier: Macmini1,1
-Intel Core Duo 1.83GHz
-1Gb 667MHz DDR2 RAM
-4 USB ports
for the record, i think the guy i bought it from bought a new mac mini and just included the discs that came with the new one in the one he sold me. The instruction manual shows a mac mini with a mini display port. The only OSX disc i got from him was the snow leopard one. also, if it matters, this mac mini is the only mac computer that I own.
View 9 Replies
View Related
Apr 19, 2010
I'm trying to install OS X on an Intel X25-M SSD. I'm at the point where it asks to select the disk where you want to install Mac OS X but no disks are showing as available. I can see that the computer recognizes the Intel SSD in Disk Utility but it says it's not formatted. Is that the issue?
View 16 Replies
View Related
Feb 6, 2012
word is buggy on snow leopard
Info:
iDVD '08, Mac OS X (10.6.8)
View 8 Replies
View Related
Mar 6, 2012
need to install Rosetta into snow leopard in order to update desktop AOL. how?
Info:
iMac (Flat Panel), iOS 5.0.1, snow leopard operating system
View 2 Replies
View Related
Mar 10, 2012
I have a older mac from 2007 the aluminium version with OSX tiger, people are telling me not upgrade to lion on this IMac, but to snowleopard. do i need to purchase leopard first or can i just upgrade to snow leopard?
Info:
MacBook Pro, Mac OS X (10.7.2)
View 2 Replies
View Related
Mar 14, 2012
After upgrading a desktop Mac from OSX 10.4 to Snow Leopard 10.6 it freezes up. Should I start all over again from the beginning or is there a way to find the problem?
Info:
iMac, Mac OS X (10.6)
View 1 Replies
View Related
