OS X V10.6 Snow Leopard :: First Time Machine Full Backup Over Ethernet Not Recognized Latter Over AirPort

Feb 5, 2012

I have a 3rd Party NAS (Iomega Home Media Network Cloud Edition 2TB) and MacBook with OSX 10.6.8. I did run a first TM full backup over Ethernet (around 240GB) because of the extremely slow transfer speed over WiFi via the AirPort. It went Ok (after several tries and reading here in the forum). Then, I disconnected my MacBook from the wired network, so futures frequently backs-up happen wirelessly, however, it seems that it did not recognize the first full back-up, asked for re-doing it again from scratch and erased my first full-backup-over-Ethernet.

I've seen that the MAC address is used as part of the sparse bundle file name; obviously, there will be a conflict here because Ethernet and AiPort do not have the same MAC address (of course !).I will run a brand new full first backup over Ethernet, but I'd like to know what do I have to do for getting it recognizable for futures backups over AirPort?

Info:
MacBook, Mac OS X (10.6.8)

View 12 Replies


ADVERTISEMENT

OS X V10.6 Snow Leopard :: External Drive Mounts But Not Recognized As Time-machine Backup

May 30, 2012

I have a MBP 13" 2009, and had a HDD fail yesterday. I have an external HDD for backups with timemachine (WD 1Tb), with daily backups.I bought a new internal hdd, plugged it in today, and when presented with the install options, I selected recover from backup. There, my drive appears (in yellow), but when pressing continue, I get a message: No system backups found.

I looked around on forums and people suggested that a normal installation should be done followed by migration assistant. When I try using migration assistant and select Time Machine backup, the next page just shows up empty with a rotating thing in the middle.

When I browse the Backups.backupdb folder, everything is there, including my last backup from Saturday. I see that I can recover my files, which obviously is the most important bit, but I would like to restore Applications, settings etc, as to not waste too much time. 

Info:
MacBook Pro, Mac OS X (10.6.8)

View 4 Replies View Related

OS X :: Time Machine Backup Using AirPort Disk On Snow Leopard?

Aug 29, 2009

Update: "Magically," the backup is working over AirPort Disk. I'll chalk it up to a Snow Leopard ghost. I have been backing up to a WD My Book 1TB drive connected to my Airport Extreme router without any problems. Yesterday I upgraded to 10.6 (installed over 10.5.8, not a clean install) and have been having problems with Time Machine since. After the OS finished installing, I attempted to perform a wireless backup. Everything mounted properly, and it began a 10GB backup. When it got to around 5.8GB, Time Machine came up with a network error message (not sure which one exactly) and stopped the backup.

At this point I just connected the drive directly to my computer to perform the backup, and it did so without any hiccups. But now I can't even connect to the AirPort disk, let alone try to backup to it. Time Machine says it's not configured, and when I try to browse for my Time Machine Backup Disk it won't let me select it, even though the drive shows up in AirPort Utility. I've enclosed a screenshot of what I'm seeing. Does anyone have any tips to help me get this mounted and working again? This is not turning out to be as painfree an update as advertised.

View 18 Replies View Related

OS X V10.6 Snow Leopard :: Time Machine Backup Freezes On Initial Backup Attempt?

Mar 20, 2012

I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive.  I have a MacBook Pro that was purchased about 3-4 years ago.  The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8.  I also have another WD 1 TB FireWire external drive that I use to store all of my media files.   

After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup.  It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB.  It started the backup process at a rate of about 1 GB per minute.  In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup.   

Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings.  I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC.  I then initiated the time machine backup again.  Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute.  Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier).  When I woke up this morning at 5:30 AM it was sitting at 69 GB. 

I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it.  I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup.  And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.

Info:
MacBook Pro, Mac OS X (10.6.8)

View 2 Replies View Related

OS X V10.6 Snow Leopard :: Time Machine Full After Restore

Apr 12, 2012

I recently suffered the 'pleasure' of a HD failure in my 2008 24".An apple engineer replaced the drive and reinstated my data from time machine - all good so far.  However, my mac doesnt want to relink with my existing backups and continue the save/delete old entries like before.I can still access my old backups, but It seems to want to create a new time machine on the very little space i have left on the drive for new backups.Is there a way of relinking to the previous backup or is it a case of wipe/restart, which i'd like to avoid.

Info:
iMac, Mac OS X (10.6.8)

View 3 Replies View Related

OS X :: How To Backup For Snow Leopard With Time Machine

Apr 19, 2009

possible to back up all your data with Time Machine on Leopard and then install Snow Leopard and use Time Machine to restore all of your pictures/movies/music and the like?

I'm going to assume it's a no go since Time Machine is capable of a full system backup -- it may just turn your system back into Leopard?

View 6 Replies View Related

OS X :: Cannot Backup To Time Machine With Snow Leopard

Feb 18, 2010

I have a Apple Time Capsule which is used as a Time Machine Backup Facility and also a Wireless Hub for File Sharing and Internet Connection. I've been using Leopard for a couple of years without any significant problems. The other day, I installed Snow Leopard and suddenly, I'm facing a number of different problems and errors regarding backups to the Time Machine with the Time Capsule.

First, I was facing problems with a Case Sensitive error and now that I have ejected the Time Capsule, the Disk Utility has come up with a different name altogether and now I have the added problem of disk space on the time capsule. I know I could re-format and start over but that would defeat the whole point of my backups. The Time Machine/Capsule should re-write over the old backups when making space for new ones but its just giving me an error about not enough disk space.

View 3 Replies View Related

OS X V10.6 Snow Leopard :: Cannot Backup To Time Machine

Jun 4, 2012

I had to have the old hard drive replaced on my macbook pro running Snow Leopard 10.6.8 operating system. It was replaced at the apple store. I brought it home and yesterday restored it from the last time machine backup of my old hard drive which was Friday.That appears to be the only backup on the external hard drive I've been using with Time machine.

Today, it gets an error message. "Time Machine could not complete the backup. This backup is too large for the backup disk"...etc.

It is almost like it is trying to completely back up the new hard drive even though it was just restored from it. Is it because it thinks it is a different drive or something because it is a new hard drive?I don't want to delete the one good backup that I have but, I want to be able to use time machine to back anything up.

View 1 Replies View Related

OS X :: Snow Leopard Time Machine Backup Stall

Oct 12, 2009

So finally I hooked up an external HD to my iMac 24 to use with Time Machine. My internal drive is partitioned into several sections and the system partition of about 80GB is supposed to be backed up to this eternal drive which is a 500GB, freshly formatted. Setup is easy enough. After Time Machine starts backing up it goes to about 100MB then it stalls. Essentially it keeps running, the turning clock symbol in the menubar is spinning but no data is moved.

At this point I can stop back up and then do click 'Back Up Now' in the menu at which time it will copy a few kb's and then halt displaying '2KB of 60.96GB'. I realize that there must be something on my HD it doesn't like to copy but unlike in my other backup app I don't know how to find that. The Console doesn't tell me much. I have done repeated Repair Permissions but it doesn't help.

View 4 Replies View Related

OS X :: Reinstall Snow Leopard From Time Machine Backup Possible

Dec 30, 2010

I just got a new 1tb sata 2.5in and I want to install it, but I do not have my snow leopard disk. If I use a leapord disk will it reinstall snow leapord from my time machine backup or do I need to find my snowleapord disk?

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Time Machine Backup Or Synchronization?

Feb 5, 2012

If I use Time Machine to back up automatically to an external hard drive, but want to keep large files only on the external hard drive, will I lose the files once deleted off the computer (i.e. will Time Machine synchronize, or just save new files?)

Info:
MacBook Pro, Mac OS X (10.6.8)

View 2 Replies View Related

OS X V10.6 Snow Leopard :: How To Restore Backup From Time Machine In 10.6.8

Feb 28, 2012

I am running 10.6.8 on my MacPro (early 2008). I have 4 internal hard drives. The main boot drive has 10.6.8 and the secondary drive with a system has Lion. I cannot completely upgrade to Lion on my main drive until all my software is compatible.My main boot drive started acting like it's in slow motion 2 days ago. No matter what I do (DiskWarrior, Disk Utility, zap PRAM, fix permissions) nothing seems to work. Every mouse click or movement gives me the dreaded spinning wheel and it hangs for about 5 min and then does what it's supposed to do.

I have logged into a new account w/ no special 3rd party apps or utilities and it still does the same thing. Hard drive diagnostics say my hard drive is ok. I have tried reinstalling the 10.6.8 combo update but that hangs after a few minutes of starting. I thought about restoring a Time Machine backup from 1 day before this happened, but before I attempt a full disk backup, need to ask what to do so as not lose everything. I assume I must boot up from another disk or hard drive, correct? Can I simply select all the system folders and apps folder or do you think I should do a complete restore?

Info:
Mac Pro (Early 2008), Mac OS X (10.6.8)

View 4 Replies View Related

OS X V10.6 Snow Leopard :: Backup Using Time Machine On A Server?

Mar 28, 2012

Can I do a backup using Time Machine on a server, or it needs an external drive only?

Info:Mac OS X (10.6.8)

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Installing It With 10.7 Time Machine Backup?

May 2, 2012

I do not like OS X Lion on my Macbook Pro as I'm about to downgrade back to Snow Leopard.  I do have a Time Machine backup with OS X 10.7.  Will Snow Leopard read the newer Time Machine Backup?  I just need my documents and pictures.. or would I need to back all that up as well? 

Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Time Machine Could Not Complete Backup

May 18, 2012

I have moved a network time machine backup disk to a new computer. Now when the time machine starts a backup it produces an error message: "Time machine could not complete the backup. An error occured while creating the backup folder."

Info:
Mac mini, Mac OS X (10.6.8)

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Backup Airdisk With Time Machine?

Jun 27, 2012

OK, this questions isn't what you're thinking. I know that Time Machine will not work with and AirDisk as the backup drive. What I'm wanting to do is the opposite. I have an AirDisk connected to my AEBS that has my iPhoto and iTunes libraries on it so that they can be accessed from multiple computers. I've already got an offsite backup setup, but I want to back up the AirDisk to Time Machine also. That way if the drive goes bad it would be much quicker to restore than from an offsite source.

View 5 Replies View Related

MacBook :: Restoring Time Machine Backup From Snow Leopard

Aug 11, 2010

My Macbook has not been running very stable and I decided to restore from a backup via Time Machine. My problem is my install disks are Leopard (10.5) and my backups are from Snow Leopard (10.6). I installed Snow Leopard from an Upgrade disk which I don't still have.

I have no luck restoring the Snow Leopard backups. My question is, how would I recover these backups without the Snow Leopard install disk? Is it possible or do I need to do a fresh install, upgrade then enter time machine via the OS itself?

View 8 Replies View Related

OS X V10.6 Snow Leopard :: Time Machine Backup Only 5.63GB Of 54.91GB

Feb 25, 2012

Recently my Time Machine backup have started stalling part way. I've tried deleting the .inProgress file several time but the same results happens. The backup get stuck part ways. I have search the forums but found not much information.

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Time Machine Fails To Backup After Recovery

Mar 17, 2012

Just receovered from a disk crash. TM brings everything back on my new HD. The problem is that when I try to backup again, I get an error message saying to check TM's preferences. One problem may be that it seems that TM wants to back up the full HD rather than doing an incremental one.

Info:
MacBook Pro, Mac OS X (10.6.8), 2.53 GHz, i5, 8GB, 500 GB

View 4 Replies View Related

OS X V10.6 Snow Leopard :: Time Machine Backup Drive Failed

Mar 30, 2012

I bought a new drive and need to get my Time Machine files off the old failed drive. I'm sure there are plenty of discussions about this but I can't find any. (I so dislike the new design for the support communities.)The old drive sometimes lets me access TM so I want to take advantage of one of those times to get everything across. I know it is a very slow process if it can be done

Info:Mac Mini 1.83ghz, Mac OS X (10.6.8), Great for a while.

View 4 Replies View Related

OS X V10.6 Snow Leopard :: Time Machine Cannot Find Specific Backup

Apr 13, 2012

I need to do a complete restore of my MacBook from a previous time. Now, I back up my wife's MacBook and mine to the same external hard drive using Time Machine on a regular basis and if I open TM on my MacBook I can see all my backups in the 'time travel' view. As well, if I do a Finder search in my external hard drive, all the backup files are there, both my wife's and mine in two separate folders.

The problem comes when I try to restore, using my Install DVD. At the point that it asks me where the backup is stored, I click on my external hard drive and it shows my wife's and my backups as options. All my wife's backups appear when I select hers. But only my original backup appears when I select mine. It doesn't recognise all my subsequent backups.I've tried deleting my wife's backup folder but still only see my original backup.

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Initial Time Machine Backup Was Interrupted?

Apr 20, 2012

I interrupted my initial Time Machine backup.  How do I reinstate the initial backup?

Info:
Time Machine

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Time Machine Underestimating Backup Size?

Apr 25, 2012

Lately it seems that Time Machine has been underestimating the size of each backup. What it originally says to be a 10 MB backup turns out to be several GB. As it's backing up, Time Machine will say "X out of 10MB backed up" or something along those lines, but when X reaches 10MB, X continues to grow and so does the original estimate of 10MB. It might then say "13MB of 13MB backed up" and it will continue on this way until it has backed up so much underestimated data that Time Machine tells me it can't finish the backup because it doesn't have enough space on the backup drive. (Time Machine should've deleted some backups beforehand to make space for the new backup, but it didn't know to because it had underestimated the amount of space necessary for the backup.)  

I have already wiped the backup drive and deleted all the Time Machine preference files, only to still face the same problem. I'm backing up my internal 1TB drive (only 300 GB used) and my 500GB external drive (400GB used) to another 1TB external drive, so having enough space on the backup drive shouldn't be the problem, right? BTW, I'm running Snow Leopard.

Info:
iMac, Mac OS X (10.6.8)

View 4 Replies View Related

OS X V10.6 Snow Leopard :: Can Time Machine Make Backup To Two Locations?

Apr 25, 2012

I want to backup my system on a local internal drive and a network drive, is this possible with time machine? I want it local but also available on the nextwork incase something happens to my computer (thieft, natural disaster, user stupidity) so I can always have my files. 

Is it possible to have time machine select two disks instead of only having one? If not is there another program that can do this? I don't want to manually copy the file to the server as I would just forget. Automation is the only way it will ever happen. 

Info:
2x2.8 GHz Quad-Core Intel Xeon, Mac OS X (10.5.5), 6GB of Ram ATI 2600

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Delete One Backup Of 1 File In Time Machine?

May 9, 2012

I'd like to keep one backup of a particularly large file in Time Machine, but all the incremental backups are taking up a ton of room. I've read how you can delete all backups of one file, and all files in one backup. But can you delete one file in one backup?

View 4 Replies View Related

OS X V10.6 Snow Leopard :: Install From Time Machine Backup Created In 10.7?

May 13, 2012

I have a Time Machine Backup that I created in Lion 10.7 and I need to know if this will allow me to install it from 10.6.My HD is on its way out and I need a replacement.  I will first install 10.6 onto the new drive (as this is the disk that came with my Mac) and from there, I want to install my Time Machine backup.

Info:
Mac Mini (Early 2009)/MacBook (Late 2008)Mac Mini (2010), Mac OS X (10.6.7), LED Cinema Display

View 2 Replies View Related

OS X V10.6 Snow Leopard :: Downgrade From Lion 10.7 To 10.6.8 Using Time Machine Backup?

May 17, 2012

I have just upgraded my system mac book pro from 10.6.8 to 10.7.....but it become slow and graphic problem also....can any one suggest how do i downgrade my system back to 10.6.8...I do have Time Machine backup for 10.6.8 working time a day ago..

Info:MacBookPro, Mac OS X (10.7)

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Time Machine Sparsebundle Only Keeps Most Recent Backup?

May 25, 2012

I have a Mac Pro with Snow Leopard (10.6.8) with three internal hard drives. I'm using one of these hard drives for backup (not the best set up, as I would prefer something external, but hey, better than nothing). So I created a sparsebundle on one of my 1 TB drives with a max size of 700 GB, following the directions here: [URL]..(except that mine is not a network drive). But now I am faced with two problems: (1) Time Machine does not back up unless I manually tell it to. (2) Time Machine only keeps the most recent backup. It no longer keeps incremental backups, now that I'm using a sparsebundle. Prior to using a sparsebundle, neither of these problems occurred. Is this normal? Has anybody else had this issue, and how do I resolve it?

Info:
Mac Pro, Mac OS X (10.6.8)

View 3 Replies View Related

OS X V10.6 Snow Leopard :: Kernel Panic While Trying To Backup With Time Machine

May 29, 2012

Over the weekend I tried to backup my MacBook Pro onto an external harddrive, and when about 23Gb out of 110Gb were completed, my mac went into a kernel panic ("You need to restart your computer. hold down the power button until it turns off, then press the power button again." in four languages). Previous backups went fine. So I did a reformat of the ext. hdd, same thing: after about 20 or so Gb of backup, the msg. pops. otherwise the mac runs without problems. Did a virus check, which came up negative.

Here is the panic log:
Interval Since Last Panic Report: -6 sec
Panics Since Last Report:1
Anonymous UUID:7254B2B2-A9E2-40B3-9A00-06A141425C7F
Mon May 28 06:53:53 2012
panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x00270ea8, type 14=page fault, registers: .....

Info:
MacBook Pro, Mac OS X (10.7.3)

View 2 Replies View Related

OS X V10.6 Snow Leopard :: Time Machine Backup Of Mounted Disk

Jun 13, 2012

For sharing my iPhoto Library among multiple users on a MacBook Pro running, currently 10.6.8, I have by a Apple Support guide created a disk image file, and mounted it for storing my pictures without permission issues.However, to account for future expansion, the disk image is made to be 100 GB, while current photo library size is approx 50 GB. Is there any way of getting Time Machine to backup the files within the mounted disk, rather than backing up the disk image file itself? So that the size of the backup at present would be the actual size of contents of the disk, rather than the whole disk image file itself? And furthermore, by copying a disk image file, will the actual files within also be backuped?


Info:
MacBook
Pro, Mac OS X (10.6.8)

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved