I have the 9C9E display. Is this a good one? Also, the colors on MacRumors look purple, where on my moms 2.4 Macbook they looked blue. Especially the thread links. What do I do?
View 13 Replies1. Today, I turned on my MacBook running 10.5.7 bought in the Summer of 2006 and the colors were washed out/faded. They were noticeably more bluish-purple. This is the third time it happened over the past year, so it is incredibly hard to replicate for a genius. A restart fixed the issue. I did not mess with the color schemes (I actually don't even know how to use them), nor have I dropped my laptop in the past three years I have owned it. Anyone know what is the issue here? I'm pretty sure it's hardware-related. I am concerned because my AppleCare is expiring this coming September, and I don't know how to replicate the problem.
2. Also, after a good period of nonuse, one-fourth of my screen (the lower left corner) is noticeably "darker" after I turn it on. The area goes back to its correct brightness after 10-15 minutes, like the screen has to warm up first. I've had this problem since I first purchased the unit but this dark spot has definitely gotten bigger. Is this normal for a laptop?
3. Coconut battery says that I have only gone through 4 battery cycles. I've calibrated the battery and the program still says the same thing. The battery I replaced quite a while ago did not have this problem.
I have a shared HP F2230 all-in-one attached to my mac running leopard 10.5.5. I have been printing regular MS Word black and white documents fine from my other Windoze vista / 7 Beta computers. Tried to print a colored photo but the colors are inaccurate and all the blacks turn into purple! This happens regardless of the application in windows (Paint, MS publisher, and even printer test page!) I tried to print the same photo in the mac and had no problem. I attached a photo of the print out from my windows 7 beta machine.
Tried to reinstall drivers, restart printer, restart mac, but it didn't work.
Enjoying the speed of my new iMac i3 but the colors just seem way off compared to my older MBP. Perfect example is going to craigslist where the text is blue on my MBP but on my iMac the text looks purple. What is wrong here and what can I do to correct this?
View 6 Replies View RelatedWhat is the significance of the purple and green colours when I put music to my project? I am able to edit the "green" music but NOT the purple music. Is it possible to do panarama/photomerge in iPhoto?
Info:
iMac, Mac OS X (10.0.x)
So I have this collection of pixels near the bottom of my screen but they're only visible over a dark grey area, like when you're in the login screen (I have an early 2013 MBPr 15 btw)Â
It's probably a problem with the screen itself and not the GPU (or maybe the connection between them?) since if I take a screenshot it's not visible and I've connected it to an external monitor and it doesn't have it.Â
I took a picture of said problem [URL] .....
I've had this for a few weeks now and I've tried those youtube videos (I just to have some image retention after leaving something to run for a long time) which have decreased the amount of pixels. They all dissapeared for a few hours and now they're back.
I recently purchased a ColorVision Spyder 2 to calibrate my MacBook Pro display (I have the 9C83 panel). The results were wonderful—everything seemed to improve colorwise. There is one exception, though: in applications that use ColorSync (Safari, iPhoto, etc.) blues turn purple. Not just a purpleish-shade of blue—purple. The easiest way to see this is by opening a color picker, such as the one in Pages or Adium. Using the RGB sliders to choose a perfect blue—255—it's easy to see that it's purple. Other interface elements changed, too: blue menus, such as when you organize bookmarks in Safari, become purple. I found a long thread about the issue here, but no conclusion seems to be reached. It looks like the color spectrum created by these hardware profilers puts blue very far away from the sRGB blue, causing an adjustment to purple. A lot of people here use calibration tools on their MacBook Pros—has anyone else seen this? And you if have, is there a workaround?
View 4 Replies View RelatedI was given a Macbook 5.2 2009 Early, with nvidia 9400m because it has a little problem and the previous owner has taken another one. Basically, the display colors are fuzzy. I already tried the CTRL ALT CMD 8 but does not change much. I tried resetting the PRAM by holding down ALT + CMD + R + P at startup and waiting for the second sound before leaving, but nothing happened. I tried to re-install the operating system, but no way. I cannot try it on an external monitor, but using teamviewer this is the result, you see everything perfectly. The image also shows colors comparison. Could that be the display data cable? Display itself? VGA card?
View 3 Replies View RelatedSo I bought my MBP this past May and didn't have problems with it until now. I recently opened up my photo booth and noticed that the display flashes very quickly into different lightings/colors. It's very strange because the ceiling fan isn't on, and my MBP is sitting still. I've never seen this issue on anyone else's MBP either. I'm leaving for college very soon and don't want to leave unhappy with my MBP. If I visit the genius bar, will they give me a replacement with my one-year warranty?
View 1 Replies View RelatedIt's been a while since I've hooked up my MacBook (late 2008 aluminium) to my TV (Samsung LE40M87BD), to use the latter as an external display for watching a film. Tonight I did it once again, and to my dismay the TV was displaying only thousands of colors. Maybe even only 256, I don't know. It's not a changed setting in my TV, as I've looked through its menu and couldn't find any option that would force it to display the millions it's certainly capable of.
After seeing this weird issue, I opened System Preferences. I looked in the Displays preference pane, but since some years Apple allows no manual control over the color depth anymore. So no luck there. I tried restarting, but that changed nothing. It outputs a correct 1080p 50Hz (PAL) signal, but the colors are just all wrong.
How can it be that my MacBook always used to perfectly display millions of colors on my TV, but now suddenly doesn't? I'm using Apple's own Mini Display Port to DVI adapter, and then a DVI to HDMI cable, which always worked problem free. So it's not the cables, I think. It has to be something in the hardware or software. I'm hoping it's software, otherwise it will be a more serious problem. I haven't tried BootCamp yet, but will do so tonight, just to see if Vista will output millions of colors.
Observe:
Apparently someone else has this issue, but unresolved: [URL]
Why does my new (May 2014) iMac display flash purple once, quickly, during boot up?
Info:
iMac (21.5-inch, Late 2013), OS X Mavericks (10.9.3)
I've just installed the 10.6.2 update in my new 21.5" iMac. When my computer restarted all the colors look inverted in all applications, dock, menus, photos, desktop image, everything. Does anyone has the same problem or an idea of how can I fix this?
View 4 Replies View RelatedI have a copy of Sim City classic, I tried installing on my MBP, no classic/can't lower the screen resolution low enough. I picked up a Power Mac 5500/225 from work, figuring it would do the trick. I can't get the graphics any lower then 256, the game wants 16! It also has a black and white game, but even after I turned the monitor to black and white, restarted, still didn't see it as two tone. I love the original version of the game, and even though I know people claim you can play on the Maxis site, they never send me a log in, no matter how many times I try
View 11 Replies View RelatedIn display in system preferences there is a tab with "Millions," "Thousands," and "256" colors,but 256 colors is dimmed. How do you set your MAC display to use 256 colors so I can play an older game?
View 6 Replies View RelatedOkay, so I installed Snow Leopard on my parent's Mac mini and it has a Hanns.g display connected to it. In 10.5 Leopard, the colors looked normal (still not as good as an Apple monitor, but colors were close enough). Anyway, like I said, I upgraded to Snow Leopard and now the monitor's color is all out of whack. I tried re-calibrating it and everything. The weird thing is, I got the Finder to look okay, but all of the blue icons in the Dock (iTunes, iChat, Safari, QuickTime etc) look PURPLE! Also, the menu bar selections are the same purple color instead of that light blue. The other weird thing is... looking at the Finder icon in the Dock looks half purple and half light blue, but when I hit cmd-tab, it looks half blue and half light blue. The cmd-tab icon of the Finder looks like I'd expect it to look, but all the colors are completely destroyed in the Dock. Another thing is... scroll bars seem to look like normal blue too. One more thing... when I tried doing the manual calibration, it shows you how bright to make the monitor with the little graphic. The graphic looked so washed out that I couldn't make the monitor dark enough (on the darkest setting) to get even close to the picture that the calibration tool wants me to see. Is Snow Leopard only compatible with Apple monitors? I installed Snow Leopard on my Mac Pro (Apple Cinema Display) and all the colors are consistent. The colors look the same regardless of 2.2 gamma or 1.8 gamma, so please don't bring that up. I want BLUE icons... not purple!
View 24 Replies View RelatedI have a 30-inch cinema display and a Power Mac G5 (quad). Last night I was toying around by trying to boot an old 450 MHz G4 connected to my G5 via firewire ( I need to do some work on the G4 and it doesn't support my big display). So I connected it to my G5 via firewire target disk mode, then selected the disc (which has 10.2 on it) in the Startup disk preferences via System Prefs. Then I tried it and got a kernel panic. Alright, so it didn't work. Oh well. But now that everything is disconnected and my G5 is back to it's normal state (meaning the G4 isn't connected at all), when I start up, my display acts very weird. I get a few flashing colors blocks at the beginning, then it blacks out. Then when I login, it goes black again, then pops back on. So I'm trying to figure out what I did to my baby and how to fix it.
Information:
Quad-core 2.5 G5
Mac OS X (10.5.1)
30" Apple Cinema Display
Im using the 15-inch model and I am noticing that some of the blue colors are looking like purple. What can I do?
View 6 Replies View RelatedIn photos, the vivid colors are great, but when reading text, surfing, googleing etc.. the super 'vivid' blues (which actually look purpleish to my eye) are just too much. Color calibration doesnt seem to be able to do much with this, and I think alot has to do with the drivers. Anyone else annoyed by this? More importantly, anyone annoyed to the point of fixing the problem? Maybee using new drivers, or some good settings you can pass along?
View 1 Replies View RelatedHas anyone noticed on their new MBP that blue links change to purple when scrolling down a webpage with links? I'm able to reproduce this every time with the Google Search Results pages. My screen is model 9C9E from manufactur 610.
View 24 Replies View RelatedI just exchanged my 9CC2 Macbook Pro (it was having problems with the HD/etc.) with a 9C9E display. I hear this display has problems with color, particularly blue - but I can't seem to see any. All of the links I look at that should be blue are a beautiful shade of blue, and nothing seems purple. The whites are white, blacks are black. No streaking on the side of the screen. My MB was manufactured earlier this month (week 36). Perhaps these issues were resolved? Anyone have a problem with the 9C9Es with recently purchased Macbooks?
View 1 Replies View RelatedThe glowing Apple Logo behind the screen seems to be glowing a slight purple colour, but mainly white. Is this normal due to the screen being so thin?
View 6 Replies View Relatedwhile surfing the internet (I was reading an article on CNN and scrolling down to continue reading), the screen color changed to tinges of green and purple. The entire thing froze...no keys, no mouse, not even force quit...nothing. I had no choice but to do a hard shut down by holding down the power button until the laptop just shut off (Macbook Pro). In the middle of rebooting, (at the grey screen with the apple logo on it, I got the familiar circular dial that ticks around as it loads) a screen wipe similar to the effect of some screen savers went from the top of the screen to the bottom turning the screen from grey into green and purple vertical stripes.
It also said "you need to restart your computer" and proceeded to tell me how to do so in four different languages. Upon doing so, the same thing happened...several times. I tried booting it into safe mode by holding down the shift key until the grey apple background appeared and it seemed to be working as the loading was taking forever. Alas, the same thing happened. I took the battery out and held down the power button for 10 seconds, put the battery back in only to suffer the same effect. The next genius bar reservation isn't until Friday.
i have had a Macbook Pro which I got in mid 2008 and it just yesterday began doing something strange. After working in Mac OS X for a while I saw that many of the white areas on my screen were filled with purple lines. Most of my pics in my background are outlined with varying colors and I cannot figure out what is going on.
I began to suspect the graphics chip at first, so to test this theory I plugged it into an external display and the problem did not exist there so I concluded that it was not due to the graphics chip. I have a friend who performed some tests and believes that it is a problem in the connection between the monitor and the graphics chip and that certain bits of data just aren't making it through. I thought that this was a feasible problem, but to get a second opinion I took it to the local apple store on my university campus and they looked at it and also concluded that it was not a graphics chip problem, but that I may have to replace the whole display assembly. This was fairly expensive and I cannot afford to do that since time got away from me and I forgot to purchase applecare. (How stupid of me. Aargh!) Anyway, so I was wondering what is believed by the macrumors community to be the best option. I discovered that this problem seemed to happen on a lot of this particular model of macbook pro and that apple offered to replace the graphics chip for free because of it, but since they do not think it is a graphics chip issue, it appears that I am stuck.
I have a first generation macbook pro, recently i have been getting neon green and purple blotches appearing on my screen. I was also having a hard drive problem so i swapped that out and installed a fresh copy of OSX 10.4 on there and was still having the green and purple show up so I know that it is hardware related. I also have hooked up an external monitor and they show up on that monitor too so I konw the problem is not related to my monitor.. I downloaded fan control and have found that if I keep my macbook under 53 degrees C then They wont show up nearly as often but they still do. The only problem with this is that to keep it under 53 degrees C then I need to have the fans running extremely fast the entire time which is not really solving the problem...any suggestions?
It kinda looks to me like I need to get the logic board replaced, what does that entail.. can I do it myself? im pretty good with computers and electronics. I don't have apple care and the warrenty has definelty been voided or is expired..what kind of $$ am I looking at?
My macbook screen has turned blue/purple as picture depicts. Any solution to this?
Info:
MacBook Pro, OS X Mavericks (10.9.4), mid 2012 release
I just hooked the cable up, and I get the standard Purple Haze in space desktop that I have on my Macbook, but nothing else. No icons, no toolbars, nothing. The only time I was able to get anything to come up on my larger screen was when I went into Preferences, and Desktop and Screensaver. When I click on that, I did get a box to show up on my larger screen, listed as the Secondary Desktop.
How exactly do I get the larger screen to serve as my main screen? When I close up my laptop,the larger screen goes blank. I have no idea what to do, please help!
Another question I have is how the screen will look once I do actually get it to work. The reason why I ask that is because my larger screen is an old 17" Dell, the old 4:3 box kind. I plan on upgrading to a 20" plus HD display in the near future, but cannot at the moment, so the current 17" will have to do.
Anyhow, just curious if the screen is going to be completely wonky looking given the resolution that my Macbook will be feeding it?
I was sitting with my MacBook Pro, when out of no where, purple vertical lines began flickering on the screen. I tried getting them to stop, then eventually just shut down my laptop. When I went to power it up again, it first popped up with the white apple screen and chime, then a gray screen dropped down with the message "You need to restart your computer. Hold down the Power button for several seconds or press the Restart button.".
I tried the Power button option first, but the computer does not come back on. When I press the Power button again, it does the same thing all over again. I do not know where the "Restart button" is, so I haven tried that. I have also tried pulling the battery and restarting, restarting in safe mode by holding the shift key at start up, and trying control-r and control-s functions. None of which worked.
Info:
MacBook Pro, Mac OS X (10.7.4)
I am taking screen shots using both Apple+Shift+3, Apple+Shift+4, and SnapNDrag, and the same results turn up each time.
URL
The pre-dominantly purple color is the same purple as my wallpaper. The rest of the stuff (the white lines, the gray on the left)-- I have no idea.
After a series of events with my MBPro's screen going weird purple/magenta color intermittently and making text all but illegible, I ran the AHT (Apple Hardware Test).
This returned an error stating there was a problem with the video controller:
"4VDC/1/40000003:Video Controller"
The machine's about 3 years old.
