Does anyone have for a good usb 2.0 card I can install on a power mac G5? I am looking for an internal card not a usb hub.
Information:
Power Mac G5
Mac OS X (10.5.1)
Any new news on what card with mini display out will work with the 27" imac? I want to buy a new card for my gaming PC, but dont have room for 2 monitors and would like to use the 27" Heard there were a problem with 5? series? has this been fixed or anything other cards i can use?
View 2 Replies View RelatedI need to get an expresscard reader for my MBP that WILL read Sandisk Ultra II cards. I want one that fits flush or close to flush and that I will be able to leave in without freeze ups. I was going to buy this but it just got Deactivated...
[URL]
I'm coming from a good 7-8 years with an old G4, so forgive the ignorance. On that one, I added a PCI audio card to connect with some Altec Lansing speakers with Sub-woofer & simulated Surround sound. It sounded great. hat's your suggestion? Get a similar card for the G5?Or get some new speakers that will sound as good?I don't know anything about digital audio out. Does that connect to speakers, or only tuners?
Information:
G5 tower
Mac OS X (10.5.1)
The past few months I've made threads asking about eSata express cards and external storage and have received useful information. However, I've always neglected to ask this obvious and direct question. I've been recommended a few cards, one from OWC always comes up. But I never bothered to ask about "dual" versions because I thought I'd be able to find it on my own.
After weeks of casually looking around I wasted a few hours yesterday hard core searching online. I really need a storage solution for my exploding cache of photos and video that's been stockpiling and needs editing.
Perhaps FW800 or another interface could be a better solutions. But when I choose my new MBP 17" a few months ago I specifically kept the fact it retained the express card slot in mind because of it's higher transfer rates.
I'd get 1 TB but I'm thinking realistically I need 2+ TB of storage... and also I think I need to finally get my rear in gear about redundancy. I use Time Machine with an external FW400 HDD and back up my music separately there too but want to keep in mind future space should have redundancy in mind.
I recently purchased a PCI card made by SIIG: CyberSerial PCI 16550 RS232 Serial I/O Card. After I got it I noticed the system requirements only list Windows.For the **** of it I installed it in my Power Mac. The system seems to recognize it in "About This Mac..." as a "Serial Controller". There appear to be serial ports assigned to it: /dev/cu.pci-serial3a.When I try to run a serial terminal program over this port (connected to some known working hardware) I get gibberish. I've checked out the cable and remote hardware on another machine and it works fine.
Information:
Power Mac G5 1.6GHz
I'm considering to get an additional battery for my MBP (Alu Unibody)
Wondering is there a cable/connector for connecting the battery directly to the MagSafe power port?
Only manage to find "FastMac�s TruePower U-Charge", which seems rather useful but it's not available for Unibody MBP YET
This is my first post on the forums, although I'm planning on looking around in here once in a while, to see what people are posting.
For starters, I just wanted to tell you about this little problem I've been having with my MacBook 1,83GHz.
Sitting at my desk at work one morning, peacefully drinking my coffee, I suddenly received a rather discomforting error-message from my shiny new (about 1 month old) MacBook;
"A USB devise is currently drawing too much power and the port will be deactivated.".
Just realized that all the firewire ports on my 8-Core Mac Pro share the same bus. I need to capture video from a HDV camera to a firewire hard drives and I get hickups and slow downs that cause dropped frames. Can anybody share any links to what FW card to get to and where I can buy it from? Anything that does not cost to much? Please only post links of cards you have used or read good reviews using it on a Mac Pro. Also what slot would I put the card in? I want to make sure the slot is not also sharing a bus with something else.
View 7 Replies View RelatedHow good does it work? Does Snow Leopord run as smooth with the Intel GPU as with the 320M/330M? The intel GPU does not support OpenCL I heard, so when SL will make use of OpenCL alot, you need to activate the 330M all the time then?
View 3 Replies View RelatedI would like to upgrade my 17" Powerbook G4 to wireless n, but I'd like to upgrade the internal airport extreme card instead of using a PC Card adapter.
Are there any options for this?Will this airport extreme card from early model MBPs work?
my specs:
17" pwrbk Hi-res
1.67 G4
late 2005 model: Powerbook 5,9
I want to keep my applications etc on one internal HD and use my second internal HD as a back up.I am a graphic designer, and i have been backing up to an external LACIE Porche 160 Gig firewire HD. This has worked fine, but...My second internal HD (112 gig?) is still loaded with 10.3 and has adobe CS2 on it along with some other crap that I no longer need.I have loaded Adobe CS3 on my primary drive and have all the files I need on that one...What is the best way to set up my second HD as a "slave" drive to improve the performance of my G5 dual 2 Ghz??Will there be any issues now that I loaded Leopard on the primary HD?
Information:
Power PC G5 Tower 2 Ghz dual processor (2004?) with two internal hard drives
Mac OS X (10.5)
I bought a new iMac a couple of weeks ago, it's my first alu one but I've had two of the white plastic ones before. The sound from the internal speakers in my old iMacs is pretty acceptable for day to day usage (not playing music of course), but the new one sounds horrible... extremely tinny. So is this just what they're all like these days? If not I guess it's got some issues:-/
View 3 Replies View RelatedI've been suffering of slow speed on my macbook pro, and this happens when I unplug it from power and just let the battery works itself, then the % CPU usage increases dramatically to 330% and the laptop becomes very very slow, what should I do? Because if my macbook is off-power, it doesn't work properly, so what is the point to own a portable computer?
Info:
MacBookPro, Mac OS X (10.7.4)
I have added a new switch to my network and it seems that ethernet port 1 does not work on this new switch. My network consist of dhcp server>switch 1>switch 2. Switch 1 is in my entertainment center and had ethernet port 1 connected to this switch since I have had my computer but when plugged into switch 2 which I have just added to my workstation and on the switch there is no lights and in system preferences port 1 flashes between not connected and no ip address. For port 2 it connects fine and both ports are set for dhcp. I have tried different cables setting a static address and can not find a reason why it won't work.
View 5 Replies View Relatedtried 2 boot up my G4, nothing, replaced internal battery, no status change, advice? would still like to be able to use it if possible and affordable
Info:
G4 dual os boot, Mac OS X (10.4.11), will also boot up in OS 9.2.2 when
I know it sounds strange, but my Time Machine HDD works only on one USB Port.
The facts:
I Have an encrypted Time Machine Backup on an External USB 2.0 HDD.
My MBP 13 inch 8,1 (Early 2011) runs the latest OS X Yosemite Version (10.10.1).
Any other external Drive (Flash drives or HDDs) do work on both USB Ports perfectly.
If i plug in my Time Machine HDD in the left port everything works fine.
If i plug in my Time Machine HDD in the right port it isn't even listed as an unmounted device in Disc Utility.
I connect the USB port directly from the HDD to my MBP (without USB hubs or anything else in between).
I am not sure but i believe that both USB Ports are internally connected to one USB Port, so i know its a strange issue i am having here.
Info:
MacBook Pro, OS X Yosemite (10.10.1)
I'm running a new Macbook pro 15 in - 2.8 Duo with 9600 gt. Bootcamp with Windows 7 build 7100. My internal mic works in other applications, but for some reason, when I try to play Steam games, it doesn't pic up any audio coming through it. Tried +voice_forcemicrecord 0 in the Steam startup options. I have only installed drivers from the OSX DVD and one from Nvidia for the graphics card. Any ideas why this is happening? Other folks seem to be able to get their internal mics to work with Steam.
View 2 Replies View RelatedI have seen people all over the internet saying that their MBP monitor would not turn on, but I have not seen my situation before. I used the computer a week ago (it's a work machine and I'm a part time intern) and both the external and internal monitor worked. I shut it down and when I came back the computer booted up to the external monitor but gave no video on the internal.
I shut down, removed the external monitor (connected by DVI cable) and rebooted. Nothing came up but when I connected the external again it worked fine. This had happened before, but when I shut down and rebooted without the cable connected it came back on immediately. I'm just hoping its not a bad graphics card or something that needs to go in for warranty.
I have a 2009 unibody macbook pro. I have 42 in lcd tv. I have a minidisplay to vga adapter and a vga cable. When I try to connect the monitor to the mbp when the lid is open nothing is detected. I do not get any options to change to mirror mode or am able to change any settings regarding the monitor. I can change the resolution of the built in display only. Now for the twist. If I connect everything, do a restart and close the lid, as the computer boots up the external monitor works. Its the grey boot screen with the apple logo. But as soon as the computer begins to load the desktop, the monitor losses the signal. At first I thought it was going into sleep mode, so I hooked up a usb mouse to keep the computer awake. I tried the process again, and as soon as it goes to the desktop it losses the signal. So I don't think it is sleep mode. I downloaded the minidisplay prot firmware update, but because the screen is not detected when the lid is open I cant run it. When the lid is closed the computer either goes to sleep or doesn't send the desktop signal and I still cant run it. Nothing happens if I change between the video cards (9400 and 9600gm). Is it a resolution issue? Do the vga cables have a max resolution that is lower than 1900 x 1200?
2009 unibody intel macbook pro
running 10.6.8
3.06 ghz 8gb ram
what you Mac Pro users are using as a sound card? I would find it hard to believe that many of you are using integrated sound when you are editing sound or creating videos. What options are there for a good sound card in osx?
View 10 Replies View RelatedInternal and headphone sound does not work. Only bluetooth speakers work for sound. Whats the problem and how much does it cost to fix?
Info:
MacBook Pro, Mac OS X (10.6)
So I just received a used macbook that has something stuck in the headphone port. What this means is that os x wants to use the optical out (digital) and once it does that there is no way to use the internal speakers. And, because it is stuck, I can't use headphones either. Temporarily, I am trying to use an old USB external Creative sound card for my audio, but when I plug it in all it does is recognize it. I tried plugging into every port but nothing.
View 1 Replies View Relatedsorry for the cryptic thread title, didn't know how to describe this in a few words:
Some time ago I read somewhere here that RocketRAID cards alter drives attached to them in a way that makes the drives not recogniseable to other SATA chipsets/ports. Unfortunately, I wasn't able to find that thread again.is that (still) true?I'm asking because I'm planning on some drive juggling in the near future and don't want to be negatively surprised.
a friend recently gave me a g5 power mac that had some issues, and the failure was described as intermittant. The machine supposedly would work properly when booted and start freezing up after time, but if turned on the next day it would work properly for some time. I assumed it was an overheating issue, but apperently there is more to the picture. I have tried booting the machine quite a few times and the display always reads no signal. The machine sounds as if it were booting normally, but there is not output. At first I assumed it was my display cable, which was a DVI-D single link, however the DVI-D dual link cable leads to the same result. Is it nessicary to have a DVI-I cable? None of the error LEDs light up on the motherboard. After doing some hunting I haven't found anyone with the same issue, but I am wondering if I should assume the graphics card is dead. What steps do I need to take to isolate a graphics card failure in a power mac g5?
View 3 Replies View RelatedAnyone knows a good WebCam for the Mac Pro ? as i heard most of the webcams has problems with mac OS .
View 24 Replies View RelatedMy 15" late 2006 MBP has just stopped producing sound from the internal speakers and for the first time there is a red light visible inside the headpbone output port. Apple support says contact support but since I'm a long time out of even my extended warranty.
Info:
MacBook Pro, Mac OS X (10.4.11)
I hav" a "late 2004" G5 2.0 dual processor. To upgrade graphics card, I find many require a power supply splitter. Do I have a molex 4-pin connector? I can't see the location inside the box.
Information:
G5 dual 2.0, 2.5Gb
Mac OS X (10.4.3)
I have an old power mac and want to get it online if possible .Does anyone know if ots possible to install an airport card into it and get online that way ?
Info:
PowerMac, Mac OS X (10.4.11)
I'm looking to buy a scanner to scan old documents and photos. I also have lots of negatives of different sizes (both black-and-white and color). Most scanner companies don't put an emphasis on making good Mac drivers, and I know a lot of printers and scanners are not compatible with Macs running Snow Leopard. Can anyone recommend a good scanner that has a solid, updated driver and great support for scanning film negatives?
View 1 Replies View Related