MacBook Pro :: BootCamp Drivers For 32bit XP Home SP2?
Dec 4, 2008
I have an Late 2008 Macbook pro unibody, 4gb, 320gb 7200rpm. I installed the bootcamp drivers off the leopard CD that came with the mac and all was good! I have since taken it to Australia for a holiday and need to reinstall bootcamp but left the Leopard CD back in the UK. Stupidly, the 2.1 bootcamp drivers on Apples site don't support the Unibody mac! Can anyone please direct me to where I can download the Drivers (for 32bit XP home SP2) for the Unibody Macbook pro? The exact ones that are on the Leopard CD that came with the new Macbook Pro?
I've successfully installed windows professional 32bit onto my mac computer with bootcamp. When I insert my OS10.5 Leopard cd's into the computer windows will not detect the CD's. These are original CD's after trying to get it to work for a few mins I came up with an idea. I downloaded the 2.1 mac drivers from apple @ [URL]. I then burned the drivers onto a cd and then rebooted into windows. After copying the drivers from the cd to my harddrive, I tried to install the drivers that I had downloaded but nothing happens. I can see in the taskmanager that the BCUpdateXP.exe runs for a few seconds then does nothing. The mac is an iMac 8.1, intel core 2 duo, 2.66ghz, 2gb ram. The leopard cd's work when running the mac under Mac OSx 10.5.8 which would mean the cd's should be fine.
I recently installed the 64 bit Windows 7 Ultimate operating system onto my MacBook Pro 13 inch. I have the most basic Macbook Pro 13 inch with nothing fancy added. Whenever I load up the Windows 7 OS on my Macbook, it never utilizes or even realizes that I have the NVIDIA graphics card in my laptop. It instead believes I have some integrated graphics card that cannot even run the most basic of PC games. I know my laptop can run these games because on OSX it runs multiple games with higher requirements than these games I am trying to run on Windows.
Basic question: How do I get bootcamp or whatever else to make Windows 7 realize I have a NVIDIA card and drivers. Sorry if I am coming off as stupid or confusing.
I need a nice 13" 2010 MacBook Air owner to do a favor for me. I need the bootcamp drivers for windows 7. They can be downloaded by going to utilities>boot camp>download windows support software. I have already erased the original OS and did not download them. PLEASE if someone could be nice enough to download them and upload them to rapidshare or something.
I am installing windows 7 on bootcamp right now on my 15 inch i7 macbook pro. Unfortunately, my MBP OSX install CD is unavailable to install the drivers. My question is, I have a 13 inch macbook pro osx install cd. Will that work to install my drivers on windows 7 for my macbook pro 15 inch?
I installed the windows 7 64 bit home premium in my mac pro but drivers are not installed. When I am trying to download the drivers through boot camp, it shows "downloading windows software.." and the progress bar never completes. How I can download win7 drivers?
im having trouble installing bootcamp and drivers on vista for my macbook. i installed vista without problems but when i put my leopard disc in it doesnt not run the bootcamp installer instead it goes into a macbook air installer and asks for me to connect to a macbook air. what is wrong? i have done it before so i dont know why i cant do it now. should i do everything all over again?
I left my Leopard Discs at home and will be away for about a month. I installed Vista but do not have the correct Boot Camp drivers. I was wondering if anyone knows where to find the newest drivers. I need the ones from the disc that came with the computer if anyone can put a link or upload them. Tried Boot Camp 2.0 and update from April to 2.1. Does not have the correct display drivers, trackpad, and network drivers.
now that everythings is working again, I'm planning on upgrading my HD and buying Snow Leopard as well as Windows 7, but I'm holding off untill the release of the offical bootcamp drivers.Untill then I wonder if I can upgrade my current bootcamp drivers. I'm still running Tiger OS and the beta bootcamp on wich I installed XP, SP3. I can imagine that my drivers are hopelessly outdated, with the exception of Nvidia drivers. My Question: Can I just upgrade my currect XP drivers to bootcamp 3.0? If so, what is the correct procedure for it? I can't find any conclusive information on that through forums and google.
My Macbook Pro, along with what seems like all multitouch trackpads on Windows, has problems scrolling. In OS X, scrolling is smooth, predictable, and natural. In Windows, the page jerks around as if it's having a spaz attack. Does anyone know if there are any drivers or software that would improve the behavior of the multitouch trackpad in Windows?
Well I finally got the drivers off of the MBA install DVD (URL). Just dumped them on to a USB stick. I installed XP Pro again using bootcamp assistant without a hitch. Rebooted into XP, put the USB stick in and ran the setup.exe off of it. XP blue screened when installing Broadcam drivers it appears.
Anybody running the 3870 under Bootcamp with XP? Which drivers are you using? Windows is complaining the drivers don't exist for the card even though I installed them from the CD.
Nevermind, I finally got it worked out. It took a couple of reinstalls of the software. I don't know why. I am clueless on Windows.
I haven't seen any post about that, but seems that the last Snow Leopard build, 10A432 comes with a new version of its Bootcamp drivers and it is now compatible with Windows 7. Have anyone tried that ?
PD: I found the drivers in a forum, I don't know if it is ok to post the link, but here it goes:(URL)
I recently erased my HD and installed everything from scratch. I made a partition with Bootcamp (I had already successfully done this before) but this time the only difference was that I did a 64 GB partition instead of a 32GB (So the partition is formatted as a NTFS instead of FAT32). Everything installed without any problems (Windows XP) But when I inserted my Snow Leopard disk to install the Drivers (as it is mentioned in the instructions of Bootcamp) the XP OS won't recognise my disk and won't install anything. I also tried to download the drivers from the Apple website and install manually but without success (the installers simply won't open). So... my question is: Is there a problem with having a bigger disk partition (which means other than FAT32) in Snow Leopard?
Not sure if this is the right section to post it, but anyway.I know that officially, Win 7 isn't yet supported by BC, but can easily be installed. Is it safe? Are some things broken? Are there drivers?I kinda need to install Windows in a hurry. If something is wrong with Win 7 under BC then I'll have to install XP
downloaded from Nvidia.com which give you error when you try to install it. So here I compiled a short guide in how to update your drivers. 1. Driver Nvidia 259.47 ( found better performance with this one) for Windows Vista/7 64 BIT ONLy!!! Same driver but for windows Vista/ 7 32 BIt Download here2. After you have downloaded drivers you will noticed that they are packed with 7Zip archive (self extracting), unpack it (just remember the location).
realised that my previous post was in the wrong section, (sorry!) so i decided to re-post it in the correct place.
Ok, so i setup bootcamp and installed windows xp. installed the bootcamp drivers, and things worked fine for a couple of days.... than the bootcamp appeared to get corrupted. fn keys cant work, xp cant detect mac partition (cant access any files in there, though the reverse works), no bootcamp icon in system try. someone mentioned to search for the KbdMgr.exe or bootcamp and start the program, but i cant find both items.
re-installation of bootcamp with the cd doesnt seem to work for me. either the system restarts before installation is completed, or xp crashes during the installation process. EDIT: now all i get is xp crashing before installation is complete
downloaded the bootcamp 2.1 but absolutely nothing happens when i click on the exe file!
there are a bunch of apple drivers shown in the add/remove programs, but they dont seem to be working (tried to remove them all and re-install, but xp crashed halfway and i had to use the cd to repair it). seems to me all that the drivers are 'there' already, but not working.
short of completely starting over from scratch and re-installing the entire windows, is there anything else i can try?
1. New 11" macbook air. Set up partition for Windows XP SP2 using bootcamp. Prior to the Windows install I made the bootcamp driver install DVD per the instructions.
2. Windows installed fine. In Windows, went to install the bootcamp drivers from DVD I made and get this message: "bootcamp requires that your computer is running windows 7" And then I can't install the drivers.
I've read that Windows XP Service Pack 2 included support for both firewire 400 and 800 interfaces (up from just fw400 before), but the included update reduces the speeds on these to around 100mbps (well under their capabilities, and slower than USB!). That's with default XP drivers though, supposedly. My question is, does Bootcamp come with the drivers to make fw800 full speed? I want to run a couple high-stress games from my external drive to my MBP (Battlefield 2 and 2142), so I was wondering if anyone experienced problems with firewire speeds under XP.
I just got everything brand new again: a Macbook and Windows XP SP3 integrated CD.
I installed Windows and I am now struggling to install the bootcamp drivers.
I run the 2.1 installer and nothing happens at all. nada, no error messages etc.
I presume that this is some problem with SP3, but I have SP3 integrated so I can't install SP2 , install bootcamp and then install SP3, unfortunately..
I've installed XP SP3 for school use on my new uMBP but for some reason I cant the bootcamp drivers to install, I click setup.exe and it opens and says "The installer encountered errors before Bootcamp could be configured"
I've tried three times to install Bootcamp drivers on my Windows 7 partition and all times have failed with a mini BSOD that says "A problem has been detected and windows has been shut down to prevent damage to your computer" a couple seconds after it's done installing the ATI drivers and it's just a green bar with no text above it. I couldn't read the rest of the BSOD because it goes away in 2 seconds. Any help/fix for this would be appreciated. I'm thinking of just reinstalling the 2.0 drivers but I really want access to my Mac side while in Windows.
I have a mid-2009 13" MBP and just installed XP with SP3. I'm trying to get my Apple In-Ear headphones to work in Windows - the sound comes out fine but the microphone does not appear to record properly. It records, but on playback it sounds like a voice talking realy slowly.
The headphones and mic both work under OS X, so is it a Windows driver problem? Has anyone got their Apple In-Ears' microphone to work under any version of Windows?
I haven't actually done this. I just want feedback. We have a 'universal' ghost image of Windows 7 at work that we've created that works with all our computers (has all the drivers for computers we support). I'm looking to piggyback that image and just add in the BootCamp drivers. However I'm curious to know:
-Which BootCamp drivers would I be adding to the sysprep drivers folder? BootCamp 3.0, 3.1 or 3.2? -Would the drivers be enough or does Windows actually need the BootCamp software installed? -If BootCamp needs to be installed in its entirety, is there a way to have BootCamp silently install upon boot? More importantly, is there a way to install BootCamp 3.2 without having to go through 3.0 -> 3.1 -> 3.2.
I have a late 2008 (the brand new) Macbook Pro 2.53 C2D and I installed vista on a partition succesffuly. But once I try to install Boot Camp drivers, it doesn't work. I open up the leopard DVD, and it starts installing all the network cards and video cards, but then it gets to "KeyAgent" and it says it failed to install because I it couldn't access startup services. I pressed ignore, then it came to "MacHal" (i think, somehting like that) and it said the same thing. I looked under my account privelges, and I'm an administrator with access to everything, so I'm not sure what's going on.
