Anybody running the 3870 under Bootcamp with XP? Which drivers are you using? Windows is complaining the drivers don't exist for the card even though I installed them from the CD.
Nevermind, I finally got it worked out. It took a couple of reinstalls of the software. I don't know why. I am clueless on Windows.
I just reinstalled leopard to try and deal with some aperture slowdown issues (long story). Since I no longer have my x1900 in place I just installed with the 3870 running. I have only single monitor support out of the box. It would appear I -have- to install the ATI driver disk. So I'm thinking I'll just check on the ATI site to make sure there is no updated/newer driver. THERE IS NO DRIVER ON THE ENTIRE SITE! WTF. I went through the mac section - no drivers, just pitiful card info. I went into the driver section - nothing other than 10.4 drivers. Why in the world are there no drivers for this product available for download? Is that just to keep people from flashing a stock card? I guess I'll install my old disk, but this was very irritating.
View 24 Replies View RelatedHas anyone with an ATI 3870 upgraded to 10.5.5? If so, any issues?
View 4 Replies View RelatedI recently installed the 64 bit Windows 7 Ultimate operating system onto my MacBook Pro 13 inch. I have the most basic Macbook Pro 13 inch with nothing fancy added. Whenever I load up the Windows 7 OS on my Macbook, it never utilizes or even realizes that I have the NVIDIA graphics card in my laptop. It instead believes I have some integrated graphics card that cannot even run the most basic of PC games. I know my laptop can run these games because on OSX it runs multiple games with higher requirements than these games I am trying to run on Windows.
Basic question: How do I get bootcamp or whatever else to make Windows 7 realize I have a NVIDIA card and drivers. Sorry if I am coming off as stupid or confusing.
I have a 2010 MBP andi lost the Mac OSX install disk and don't have the drivers anymore could somebody please upload them so I can get them.
View 2 Replies View RelatedI haven't seen any post about that, but seems that the last Snow Leopard build, 10A432 comes with a new version of its Bootcamp drivers and it is now compatible with Windows 7. Have anyone tried that ?
PD: I found the drivers in a forum, I don't know if it is ok to post the link, but here it goes:(URL)
I recently erased my HD and installed everything from scratch. I made a partition with Bootcamp (I had already successfully done this before) but this time the only difference was that I did a 64 GB partition instead of a 32GB (So the partition is formatted as a NTFS instead of FAT32). Everything installed without any problems (Windows XP) But when I inserted my Snow Leopard disk to install the Drivers (as it is mentioned in the instructions of Bootcamp) the XP OS won't recognise my disk and won't install anything. I also tried to download the drivers from the Apple website and install manually but without success (the installers simply won't open). So... my question is: Is there a problem with having a bigger disk partition (which means other than FAT32) in Snow Leopard?
View 3 Replies View RelatedNot sure if this is the right section to post it, but anyway.I know that officially, Win 7 isn't yet supported by BC, but can easily be installed. Is it safe? Are some things broken? Are there drivers?I kinda need to install Windows in a hurry. If something is wrong with Win 7 under BC then I'll have to install XP
View 1 Replies View Relateddownloaded from Nvidia.com which give you error when you try to install it. So here I compiled a short guide in how to update your drivers. 1. Driver Nvidia 259.47 ( found better performance with this one) for Windows Vista/7 64 BIT ONLy!!! Same driver but for windows Vista/ 7 32 BIt Download here2. After you have downloaded drivers you will noticed that they are packed with 7Zip archive (self extracting), unpack it (just remember the location).
View 12 Replies View RelatedI need a nice 13" 2010 MacBook Air owner to do a favor for me. I need the bootcamp drivers for windows 7. They can be downloaded by going to utilities>boot camp>download windows support software. I have already erased the original OS and did not download them. PLEASE if someone could be nice enough to download them and upload them to rapidshare or something.
View 15 Replies View Relatedrealised that my previous post was in the wrong section, (sorry!) so i decided to re-post it in the correct place.
Ok, so i setup bootcamp and installed windows xp. installed the bootcamp drivers, and things worked fine for a couple of days.... than the bootcamp appeared to get corrupted. fn keys cant work, xp cant detect mac partition (cant access any files in there, though the reverse works), no bootcamp icon in system try. someone mentioned to search for the KbdMgr.exe or bootcamp and start the program, but i cant find both items.
re-installation of bootcamp with the cd doesnt seem to work for me. either the system restarts before installation is completed, or xp crashes during the installation process. EDIT: now all i get is xp crashing before installation is complete
downloaded the bootcamp 2.1 but absolutely nothing happens when i click on the exe file!
there are a bunch of apple drivers shown in the add/remove programs, but they dont seem to be working (tried to remove them all and re-install, but xp crashed halfway and i had to use the cd to repair it). seems to me all that the drivers are 'there' already, but not working.
short of completely starting over from scratch and re-installing the entire windows, is there anything else i can try?
1. New 11" macbook air. Set up partition for Windows XP SP2 using bootcamp. Prior to the Windows install I made the bootcamp driver install DVD per the instructions.
2. Windows installed fine. In Windows, went to install the bootcamp drivers from DVD I made and get this message: "bootcamp requires that your computer is running windows 7" And then I can't install the drivers.
Is there a limitation to running Windows 7 only?
I've read that Windows XP Service Pack 2 included support for both firewire 400 and 800 interfaces (up from just fw400 before), but the included update reduces the speeds on these to around 100mbps (well under their capabilities, and slower than USB!). That's with default XP drivers though, supposedly. My question is, does Bootcamp come with the drivers to make fw800 full speed? I want to run a couple high-stress games from my external drive to my MBP (Battlefield 2 and 2142), so I was wondering if anyone experienced problems with firewire speeds under XP.
View 10 Replies View RelatedIs there consesus on wether its better to use the outdated BootCamp drivers (im using Vista 32bit) or the latest from Nvidia.com / others?
In case, is there any specific procedure for installing BootCamp drivers or i just donwload and launch the Nvidia ones?
I just got everything brand new again: a Macbook and Windows XP SP3 integrated CD.
I installed Windows and I am now struggling to install the bootcamp drivers.
I run the 2.1 installer and nothing happens at all. nada, no error messages etc.
I presume that this is some problem with SP3, but I have SP3 integrated so I can't install SP2 , install bootcamp and then install SP3, unfortunately..
I've installed XP SP3 for school use on my new uMBP but for some reason I cant the bootcamp drivers to install, I click setup.exe and it opens and says "The installer encountered errors before Bootcamp could be configured"
View 1 Replies View RelatedI've tried three times to install Bootcamp drivers on my Windows 7 partition and all times have failed with a mini BSOD that says "A problem has been detected and windows has been shut down to prevent damage to your computer" a couple seconds after it's done installing the ATI drivers and it's just a green bar with no text above it. I couldn't read the rest of the BSOD because it goes away in 2 seconds. Any help/fix for this would be appreciated. I'm thinking of just reinstalling the 2.0 drivers but I really want access to my Mac side while in Windows.
View 2 Replies View RelatedI have a mid-2009 13" MBP and just installed XP with SP3. I'm trying to get my Apple In-Ear headphones to work in Windows - the sound comes out fine but the microphone does not appear to record properly. It records, but on playback it sounds like a voice talking realy slowly.
The headphones and mic both work under OS X, so is it a Windows driver problem? Has anyone got their Apple In-Ears' microphone to work under any version of Windows?
I haven't actually done this. I just want feedback. We have a 'universal' ghost image of Windows 7 at work that we've created that works with all our computers (has all the drivers for computers we support). I'm looking to piggyback that image and just add in the BootCamp drivers. However I'm curious to know:
-Which BootCamp drivers would I be adding to the sysprep drivers folder? BootCamp 3.0, 3.1 or 3.2?
-Would the drivers be enough or does Windows actually need the BootCamp software installed?
-If BootCamp needs to be installed in its entirety, is there a way to have BootCamp silently install upon boot? More importantly, is there a way to install BootCamp 3.2 without having to go through 3.0 -> 3.1 -> 3.2.
I have an Late 2008 Macbook pro unibody, 4gb, 320gb 7200rpm. I installed the bootcamp drivers off the leopard CD that came with the mac and all was good! I have since taken it to Australia for a holiday and need to reinstall bootcamp but left the Leopard CD back in the UK. Stupidly, the 2.1 bootcamp drivers on Apples site don't support the Unibody mac! Can anyone please direct me to where I can download the Drivers (for 32bit XP home SP2) for the Unibody Macbook pro? The exact ones that are on the Leopard CD that came with the new Macbook Pro?
View 24 Replies View RelatedI have a late 2008 (the brand new) Macbook Pro 2.53 C2D and I installed vista on a partition succesffuly. But once I try to install Boot Camp drivers, it doesn't work. I open up the leopard DVD, and it starts installing all the network cards and video cards, but then it gets to "KeyAgent" and it says it failed to install because I it couldn't access startup services. I pressed ignore, then it came to "MacHal" (i think, somehting like that) and it said the same thing. I looked under my account privelges, and I'm an administrator with access to everything, so I'm not sure what's going on.
View 13 Replies View RelatedI've installed Windows 7 64 Bit. I tried installing Boot Camp from the Leopard DVD and it gets to the part where its trying to run the service KeyAgent but it fails. This is the message I get.
"Service 'KeyAgent' (KeyAgent) failed to start. Verify that you have sufficient privileges to start system services."
I've tried running it in compatibility mode for Vista and made sure to have it set as run as Administrator. I also download BootCamp 2.1 for Windows Vista 64 but it wont even start. I also did the Compatibility mode and administrator for it.
I was about to install the new ATI video drivers from AMDs website for the 4800 series together with the Catalyst Control Center, however the sites FAQ and the installer itself "reminded" me to completely remove any old video drivers before attempting to install the new drivers. Well, the problem is that I can't find anything related to video card drivers in the software management / uninstall menu...
Is it safe to just install the fresh drivers and the CCC without removing the old ones ?
Running Vista SP1 64Bit, Mac specs see sig.
Apple recently replaced my macpro with a newer one and they royally messed up my windows partition so I had to start over. I reinstalled WinXPpro and installed the drivers from the Leopard disc. I have about 20 unknown devices in my hardware panel. Most importantly my wireless and two ethernet jacks aren't working in XP. I tried manually installing drivers for my wireless card, but couldn't find the exact driver (I have the Broadcom BCM43xx 1.0 (5.10.38.35)). I also tried running the latest bootcamp 2.1 install as well and that didn't work. If anyone knows where I can get the exact drivers for my wireless card I think I can just connect to windows update and it can handle the rest. I should also mention I've hardwired my computer to the network as well and windows doesn't recognize that either.
View 1 Replies View RelatedI've bought and installed into my computer the NVidia GeForce GTX 285 1GB for Mac, it's a great card, I'm on Windows 7 at the moment, if I install the WHQL 186 drivers, will it affect anything on the Mac side? does it manipulate the card or do anything that would make it windows only or damage it etc..?
This is the link: [URL]
I've been using the pre-release 10A432 Snow Leopard, and had problems installing the Bootcamp 3 drivers in Windows 7 x64. I had to disable UAC and run the 64 bit installer manually to get them to install...
Though the final release of snow leopard is also 10A432, are the bootcamp 3 drivers included on the final cd the same?
I know apple has said they will be available by the end of the year, but does anyone know when the bootcamp drivers for windows 7 will be available specifically?
View 3 Replies View RelatedDid they update the video driver for the 27" iMac so it did not have the "gradient problem"? I am wanting to get a 27" again but only if they have fixed this problem.
View 12 Replies View RelatedI am installing windows 7 on bootcamp right now on my 15 inch i7 macbook pro. Unfortunately, my MBP OSX install CD is unavailable to install the drivers. My question is, I have a 13 inch macbook pro osx install cd. Will that work to install my drivers on windows 7 for my macbook pro 15 inch?
View 7 Replies View RelatedI installed the windows 7 64 bit home premium in my mac pro but drivers are not installed. When I am trying to download the drivers through boot camp, it shows "downloading windows software.." and the progress bar never completes. How I can download win7 drivers?
Info:
Mac Pro, Windows 7, win 7 drivers
