your battery drain in your laptop to 0, and then charge it to full? I am under this assumption. Please let me know if this is wrong.Anywho, so today I decided to let my battery drain to 0, and then normally it would sleep and I'd wake it up after plugging it in.. but this time I had to actually press the power button, and a gray screen appeared with a meter-like thing to illustrate it "waking up" I guess?
View 5 RepliesWhen calibrating the battery, is it better to do a quick drain with a dvd or cd burning or a slow drain with the brightness all the way down or does it not matter?
View 8 Replies View RelatedI've got my SSD in an optibay and am using it as my boot drive. As such, I've disabled hibernation on my MBP.I am wondering about battery calibration, as you need to drain the battery down fully and have the MBP enter the hibernation state to properly calibrate the battery.
View 6 Replies View Relatedgot my 13" MBA and am very happy about it. I plan to baby this thing, and I am always very conscious of battery life for all of my devices, so do any of you have any advice for how to best handle the first charge/discharge cycle?The machine almost fully charged out of the box. Should I run it down to zero and then fully charge it? Should I fully charge it first and then run it down?
View 7 Replies View RelatedSo I just got my macbook pro yesterday 2.8ghz. quick question. I just read up on the battery calibration process on apples website. seems straight forward. just one question. after i let the battery drain and let it go into sleep mode, then wait 5+ hours, then charge it to full. can i use the computer when i start charging it to full? or does it have to be off while im charging it to 100%? t
View 7 Replies View RelatedI just got my first Macbook pro 15" and trying to calibrate the battery. Can my MBP sleep on battery during calibration? Can i finish the process after sleep? It takes a lot of time to calibrate this device.
View 4 Replies View RelatedWhen you see the low battery warning, save your work and close all applications. Keep your computer turned on until it goes to sleep.
After your computer goes to sleep, turn it off or allow it to sleep for five hours or longer.
Connect the power adapter and leave it connected until the battery is fully charged.
calibrating my battery for the first time this morning. i just opened my macbook pro to see that the time left icon jumps every minute. it goes from 8:50 to 12:38 to 6:54 to 11:37 to 7:40! and now it went from 8:45 to 9:19! the percentage remaining is consistent and correct but the time left is way out of whack! sorry for the slang! now it went from 9:19 to 9:11 then 8:47. i have the screen at the lowest brightness, no backlit keyboard, nothing else running except firefox. i wasnt aware that i was supposed to calibrate my battery and its been about 3 months since i bought this. now its at 8:37 now 8:18. this is quite
View 5 Replies View RelatedI just got my first Mac yesterday, 13" MacBook Pro. I LOVE IT! I've been trying to find out some info on the battery calibration that I can't find anywhere. I have tried Apple's website, Google and MRoogle before I made a new thread about it
View 1 Replies View RelatedOk, so I just did a battery calibration and once the battery got really low, it shut off, but didn't go to sleep like it has done before. It completely turned off; the battery light indicator is not indicating it is asleep. I've never seen it do this, has anyone else had this happen? I have a 2006 MacBook Pro, 2.33 C2D, non-unibody.
View 4 Replies View RelatedWell I just scored a 15 inch 2.4 from Bestbuy for 10% off. SOmebody just returned it having never even used it, but they had to discount it because it was opened. I love it love this thing!We did migration from our imac and everything came over. AmazingOne question about calibration. I charged it fully and let the power cord be in it for an extra 2 or so hours. I then used it unplugged until it basically shut off due to no power. Cant I just plug it in and let it charge all the way without letting it sit for 5 hours. Its not sleeping I dont think. It actually shut off suddenly as it was at zero percent. There is no power to it at all that I can tell. Will charging it now without leaving it unplugged for 5 hours ruin the calibration??
View 2 Replies View RelatedI got mine yesterday, and am calibrating the battery. When you run it down to sleep, and recharge, can you use it during the full recharge period?
View 1 Replies View RelatedI've just calibrated my battery on my 2.4GHz MBP (let it run out until it slept, then woke it up, then used it till it shut down, then charged it) and it's stuck on "finishing charge". Additionally, the battery health has gone down to 23% from 37% since I have done this.
View 10 Replies View RelatedI was sick of the battery life I was getting on my 15" Macbook Pro 3,1 (early 2008 model), so I went to the apple store yesterday to get a new one. I was over 400 cycles, so I had to just buy it, they wouldn't replace it for me. I expected that, so no big deal. But I wanted to treat this battery right. I got home, charged it up to 100%, let it sit at that for a few hours, and then let it drain overnight and rest at empty for a few hours. This afternoon, I plugged it back in with the intention of letting it fully charge and thus complete my battery calibration, but at around 40% charged, the cat yanked the charger cable out from my laptop. And then a little bit later, my girlfriend did it again. So, has my time been wasted here? Battery calibration is such a pain in my rear. i hate it. I use my laptop often and expect it to be available to me whenever I need it, regardless of how many other computers i own. I really don't want to deal with it again in the near future. And I may not.
View 3 Replies View RelatedSo I just got my first MBP, and I have calibrated my battery. Both iStat and Coconut Battery report my battery health is 98%. Do you think this is reason for concern, considering the MBP is supposed to be new? What is your new MBPs battery health?
View 3 Replies View RelatedLast night I calibrated my battery. Let it fully charge for 2hrs, took it off the charger, turned up the screen brightness and keyboard backlight all the way, then proceeded to run the battery down watching videos and whatnot. It went to sleep and I went to bed to let it sit for 5 or more hours. Woke up, charged it up, turned it on and noticed that I went from 97% to 87% (coconut battery says 86%) and I only have 54 cycles. Should I go to the genius bar or something? Or try re-calibrating the battery? Did I do something wrong when I did it? Does it matter how long it takes to run down the battery after it's fully charged?
View 10 Replies View RelatedI just bought MBP 17 i5 model a couple days ago from a local apple store(Keystone Mall). and I calibrated my battery yesterday. The thing is I know MBP should sleep when the battery is really low(running off reserve) then when the battery drains out, MBP should do the "safesleep" thing where it stores the current state of the machine so that upon turning the machine back on by supplying the power to it or after charging, MBP returns to the stored state.
But, when i was calibrating my battery, I did get the low battery warning(reserve battery blah blah) but then it drained down to 0 then the screen flickered(literally made a flicking sound) and went dead. When I got up in the morning I plug the adapter on and turned the MBP on and MBP just freshly boots.. rather than restoring the previous state..................
I have a 30 month old MacBook Pro (the SantaRosa line from June 2007)... And was still using the original battery up until 3 days ago. Its capacity suddenly dropped from 83% down to 45%, so I took it to an Apple store, they did a diagnostic, and without question told me the battery was defective, and just gave me a brand new battery with only 1 loadcycle on it. So today I decided to calibrate it, had it charged up, unpulgged it and let it run until it was 'supposed' to go to sleep... It had 0% left on it, the screen shut off, and the sleep light was just starting to dim, when I heard the hard drive go . (As if one pushed and held the power button, aka hard shutdown).
It seems it didn't have enough reserve capacity to let it go to sleep, so instead of waiting the 5 hours (as it wasn't sleeping, and pressing the button on the battery showed no lights at all), I decided to plug it in right away. Would it be a good idea to calibrate again, or simply wait a month or so and do it again then?
When I turned the computer back on, it didn't even resume at my desktop, so not only did it not get to sleep properly, it didn't even have a chance to write the memory to the hard drive, and now the actual battery capacity in Coconut battery is showing up 95%, 5253mAh
Just curious, as 30 months ago when I first got my original one, it calibrated properly and didn't completely die when it got to reserve capacity...
My MacBook Pro is only 3 months old with 37 battery loadcycles. I calibrate my notebook monthly and the battery capacity stays the same. I have also tried resetting the SMC and nothing happened I do not have my laptop continuously charging, the most would probably 4 or 5 days straight. My current battery capacity is 91%. What should I do?
View 1 Replies View RelatedI already have my monitor calibrated to more-or-less match online photo labs that I use through Flickr. However, I just bought a HP C7280 and all my pictures seem to come out very low on the magenta/red side. Rather than having to either recalibrate my monitor and edit all the thousands of pictures I have to warm them up, is there any way that I can just calibrate the printer to print a bit 'redder'?
View 2 Replies View RelatedI try to 'calibrate' it and have repeated the stupid lines time after time, clearly and slowly in a quiet environment, but they never flash or indicate that it is calibrated.
I need to know how to calibrate my monitor so that I know what my photographs are going to look like before they get printed. Either that or would it be better to buy a third party calibrator, like X-rite?
Info:
iMac, Mac OS X (10.7.3)
Iv e just purchased a new monitor an HP LP2475w sip panel and wanted some kind of calibration software to get it as close as i can. don't really want to buy anything though so is there anything around that is a trial of free i can use?
View 6 Replies View RelatedI have a Dell 2408WFP on the way, as well as a Mac Pro 2.8 with the HD 2600XT, at long last!
The 2408 was recommended by several users of this site, so I wanted to see if you would be willing to share your calibration settings for the monitor?
I've read here about the important task of recalibrating this monitor and soaked up as much knowledge as a I could (as he does get into his settings a little bit).
Since it seems some of you would have a very similar system to me , I was hoping you could help take a little of the pain out of calibrating it (without an external device) and share all relevant settings with me (monitor settings, color profile, graphics card settings, etc.)
I've done a search and not really found what I'm after. So here it is..
I like to edit photos, but I've never been confident in doing this on my Macbook, as I edit them and then on another display they always look different and over exposed.
Is it just a bad screen for colour accuracy or is it the calibration? What's the best way to sort this?
I just got Aperture and, though I've been a pretty serious photographer for a few years now, I'm starting to get more into doing actual prints and messing with RAW and thus realizing how important color correction and calibrating is. I definitely realize my MBPs screen, my external monitor, and my printer are all out of sync with each other when it comes to this. The only problem is I really have to idea where to begin to fix this.
And before anybody even thinks the word "Search," I don't want to try to piece together random threads on calibration and attempt to figure it out; that's how lost I am.
I have a HP w2408 flatscreen monitor, and I want to use it for my Macbook Pro as an external display. For some reason, after doing all of the calibration steps and whatnot, the colors on the external display still look too saturated and the text looks too washed out. Does anyone have a solution that will make the HP display looks similar to my Mac's? I'm using the Mini-Display Port to VGA adapter. The Mac is the oldest unibody.
View 7 Replies View Relatedi am a photoshop retoucher and use an Eizo coloredge CG211 monitor to calibrate it I use Color Navigator 6 software with an x rite i1 display pro.... everything was fine till i updated... then after the update.. my screen looked flat and magenta.... i could not see yellows in my 3/4 tones.. it would run thu the calibration, color navigator would say it was successful,but screen looked off and wrong....i tried everything.... changed cables, video cards,, everything...
Info:
many macs all sorts.. about 10 at my office, Mac OS X (10.4.10), iphone!
I recently purchased a macbook pro. I'm a digital photographer & I'd like to colour calibrate the screen. Can anyone recommend the best calibration system for macbook pro? I'm using Mac OS X ver 10.7.2
Info:
MacBook Pro, Mac OS X (10.7.2)
im wanting to calibrate my retina screen and i am using the Spyder 4..
it is asking me to do a few things:
reset display to factory settings
set the display to 6500k color temperature
reset contrast levels to default
can one do this on a retina display without calibrating it?
its also asking me to identify the Gamut and type of backlight used in the display...Options are -
Gamma: Unknown, Normal, Wide.
backlight: Unknown, Flueresent CCFL, white LED, RGB LED.
