MacBook Pro :: Battery Calibration / Unplugged While Recharging
Jul 19, 2009
I was sick of the battery life I was getting on my 15" Macbook Pro 3,1 (early 2008 model), so I went to the apple store yesterday to get a new one. I was over 400 cycles, so I had to just buy it, they wouldn't replace it for me. I expected that, so no big deal. But I wanted to treat this battery right. I got home, charged it up to 100%, let it sit at that for a few hours, and then let it drain overnight and rest at empty for a few hours. This afternoon, I plugged it back in with the intention of letting it fully charge and thus complete my battery calibration, but at around 40% charged, the cat yanked the charger cable out from my laptop. And then a little bit later, my girlfriend did it again. So, has my time been wasted here? Battery calibration is such a pain in my rear. i hate it. I use my laptop often and expect it to be available to me whenever I need it, regardless of how many other computers i own. I really don't want to deal with it again in the near future. And I may not.
My two year old macbook pro battery life is getting shorter after recharging. I only get about 40 minutes on a full charge when it used to be 3 hrs. Is it time to replace the battery?
I usually use my laptop at a desk plugged into an AC outlet. Well I was going to be away for a week, so I unplugged it, when I came back, the battery went from 97%, not charging to 12% when I booted the laptop up again.
Also, can one continue using a macbook laptop if the battery is dead, but run it through or plugged into an ac outlet all the time?
I have a 3 1/2 year old Macbook, my Applecare has ran out. About six months ago my computer began shutting off immediately when unplugged. (Was letting my roomates use the computer, came home one day and it started doing this.) I believe that my battery is OK, it performs between 97% and 99% consistently. When I do the battery test, all of the lights light up.
I've read through the forums and it seems a lot of people are having this problem, but their batteries are bad. What are some options/solutions to this problem? I am willing to invest money wisely into the computer to keep it running smoothly for a while.
I've tried two brand new adapters and neither work after my MBP is unplugged for a few hours and then plugged back in. Eventually it'll work again, but occasionally it doesn't acknowledge the power source. Will AppleCare cover this?
I have an early 2011 MacBook Pro 15 in. that i got in May of 2011. When i unplug the power adapter it works fine, but at about 80% battery it shuts off. i go to turn it back on and it acts as if it is dead, i press the power button again and it turns on without problem (although the date and time at first is messed up). What is wrong? I recently had to get my hard drive replaced 2 months ago and it has been working fine until yesterday.
When calibrating the battery, is it better to do a quick drain with a dvd or cd burning or a slow drain with the brightness all the way down or does it not matter?
So I usually keep my UMBP plugged in at all times. It unplugged by accident and went to 99% so I left it unplugged but literally less then maybe 7 minutes my battery is already reading down to 92%. Brightness on screen is set all the way up, if that has anything to do with it.
Firstly i have a MacBook 10.4.11 that is somewhere between 2 and 3 years old. I have had no problems with the Mac up until yesterday. Yesterday i was charging my Mac and everything was fine but i noticed that the MagSafe Adapter was lit up Green, even when unplugged from my Mac. I shrugged it off until this morning when i realised that when i unplug my adapter the Mac just turns off and won't turn back on until i plug the adapter back in. I have seen different threads about it being a battery problem or a charger problem but i am not sure where to start as most of the threads say that their Battery Icon on the Mac screen has a black "X" through it. Mine just has the Forks in the battery icon and where it would have a Time or % of what is left in the Battery, it just has a (Calculating...) and when i click to see how much it has charged, it says 0%
I also downloaded Coconut Battery and here is what it says:
Current Battery Charge: 0 mAh Maximum Battery Charge : 5093 mAh
0%
Current Battery Capacity: 5093 mAh Original Battery Capacity: 5020 mAg
My 10 month old Macbook Air 13" battery behaves weird every 4 weeks. When unplugged the MBA switches off suddenly without a warning even the battery is still more than half full. Plugging it in it tells it takes 20 hours for a full charge but never gets full. After unplugging it crashes after some minutes again and goes dark.
The battery' got 178 load cycles and 5675 mAh out of originally 6700 mAh (84%). Did several SMC resets and PRAM resets. I even reinstalled Lion from scratch without changing the battery's behavior. Calibrating the battery isn't possible because it does not discharge but crashes. I tried three different power adapters.
I've got my SSD in an optibay and am using it as my boot drive. As such, I've disabled hibernation on my MBP.I am wondering about battery calibration, as you need to drain the battery down fully and have the MBP enter the hibernation state to properly calibrate the battery.
got my 13" MBA and am very happy about it. I plan to baby this thing, and I am always very conscious of battery life for all of my devices, so do any of you have any advice for how to best handle the first charge/discharge cycle?The machine almost fully charged out of the box. Should I run it down to zero and then fully charge it? Should I fully charge it first and then run it down?
So I just got my macbook pro yesterday 2.8ghz. quick question. I just read up on the battery calibration process on apples website. seems straight forward. just one question. after i let the battery drain and let it go into sleep mode, then wait 5+ hours, then charge it to full. can i use the computer when i start charging it to full? or does it have to be off while im charging it to 100%? t
I just got my first Macbook pro 15" and trying to calibrate the battery. Can my MBP sleep on battery during calibration? Can i finish the process after sleep? It takes a lot of time to calibrate this device.
I just got my first Mac yesterday, 13" MacBook Pro. I LOVE IT! I've been trying to find out some info on the battery calibration that I can't find anywhere. I have tried Apple's website, Google and MRoogle before I made a new thread about it
Ok, so I just did a battery calibration and once the battery got really low, it shut off, but didn't go to sleep like it has done before. It completely turned off; the battery light indicator is not indicating it is asleep. I've never seen it do this, has anyone else had this happen? I have a 2006 MacBook Pro, 2.33 C2D, non-unibody.
Well I just scored a 15 inch 2.4 from Bestbuy for 10% off. SOmebody just returned it having never even used it, but they had to discount it because it was opened. I love it love this thing!We did migration from our imac and everything came over. AmazingOne question about calibration. I charged it fully and let the power cord be in it for an extra 2 or so hours. I then used it unplugged until it basically shut off due to no power. Cant I just plug it in and let it charge all the way without letting it sit for 5 hours. Its not sleeping I dont think. It actually shut off suddenly as it was at zero percent. There is no power to it at all that I can tell. Will charging it now without leaving it unplugged for 5 hours ruin the calibration??
I've just calibrated my battery on my 2.4GHz MBP (let it run out until it slept, then woke it up, then used it till it shut down, then charged it) and it's stuck on "finishing charge". Additionally, the battery health has gone down to 23% from 37% since I have done this.
So I just got my first MBP, and I have calibrated my battery. Both iStat and Coconut Battery report my battery health is 98%. Do you think this is reason for concern, considering the MBP is supposed to be new? What is your new MBPs battery health?
Last night I calibrated my battery. Let it fully charge for 2hrs, took it off the charger, turned up the screen brightness and keyboard backlight all the way, then proceeded to run the battery down watching videos and whatnot. It went to sleep and I went to bed to let it sit for 5 or more hours. Woke up, charged it up, turned it on and noticed that I went from 97% to 87% (coconut battery says 86%) and I only have 54 cycles. Should I go to the genius bar or something? Or try re-calibrating the battery? Did I do something wrong when I did it? Does it matter how long it takes to run down the battery after it's fully charged?
I just bought MBP 17 i5 model a couple days ago from a local apple store(Keystone Mall). and I calibrated my battery yesterday. The thing is I know MBP should sleep when the battery is really low(running off reserve) then when the battery drains out, MBP should do the "safesleep" thing where it stores the current state of the machine so that upon turning the machine back on by supplying the power to it or after charging, MBP returns to the stored state.
But, when i was calibrating my battery, I did get the low battery warning(reserve battery blah blah) but then it drained down to 0 then the screen flickered(literally made a flicking sound) and went dead. When I got up in the morning I plug the adapter on and turned the MBP on and MBP just freshly boots.. rather than restoring the previous state..................
calibrating my battery for the first time this morning. i just opened my macbook pro to see that the time left icon jumps every minute. it goes from 8:50 to 12:38 to 6:54 to 11:37 to 7:40! and now it went from 8:45 to 9:19! the percentage remaining is consistent and correct but the time left is way out of whack! sorry for the slang! now it went from 9:19 to 9:11 then 8:47. i have the screen at the lowest brightness, no backlit keyboard, nothing else running except firefox. i wasnt aware that i was supposed to calibrate my battery and its been about 3 months since i bought this. now its at 8:37 now 8:18. this is quite
I have a 30 month old MacBook Pro (the SantaRosa line from June 2007)... And was still using the original battery up until 3 days ago. Its capacity suddenly dropped from 83% down to 45%, so I took it to an Apple store, they did a diagnostic, and without question told me the battery was defective, and just gave me a brand new battery with only 1 loadcycle on it. So today I decided to calibrate it, had it charged up, unpulgged it and let it run until it was 'supposed' to go to sleep... It had 0% left on it, the screen shut off, and the sleep light was just starting to dim, when I heard the hard drive go . (As if one pushed and held the power button, aka hard shutdown).
It seems it didn't have enough reserve capacity to let it go to sleep, so instead of waiting the 5 hours (as it wasn't sleeping, and pressing the button on the battery showed no lights at all), I decided to plug it in right away. Would it be a good idea to calibrate again, or simply wait a month or so and do it again then?
When I turned the computer back on, it didn't even resume at my desktop, so not only did it not get to sleep properly, it didn't even have a chance to write the memory to the hard drive, and now the actual battery capacity in Coconut battery is showing up 95%, 5253mAh
Just curious, as 30 months ago when I first got my original one, it calibrated properly and didn't completely die when it got to reserve capacity...
My MacBook Pro is only 3 months old with 37 battery loadcycles. I calibrate my notebook monthly and the battery capacity stays the same. I have also tried resetting the SMC and nothing happened I do not have my laptop continuously charging, the most would probably 4 or 5 days straight. My current battery capacity is 91%. What should I do?
your battery drain in your laptop to 0, and then charge it to full? I am under this assumption. Please let me know if this is wrong.Anywho, so today I decided to let my battery drain to 0, and then normally it would sleep and I'd wake it up after plugging it in.. but this time I had to actually press the power button, and a gray screen appeared with a meter-like thing to illustrate it "waking up" I guess?
My Powerbook G4 only turns on if the battery charger is plugged in, and if I unplug it, the computer shuts off. On the menu bar, it says charging. I know the battery has to be full. This just started happening last night. Also, I just had the hard drive replaced and I've only had it back for a couple weeks.
