I also tried installing Windows to see if the 9600 would show up there, but I get a blank screen when booting the XP CD. I get the same blank screen when trying a Linux CD. Is this perhaps because the MBP is trying to use the 9600 but it's borked and not displaying anything.
View 8 RepliesI purchased a 15" Mac Book pro a little less than 1 year ago. Right after getting it I changed the video to the 9600 and haven't changed it since. I tried switching it back to the 9400 last night and only got a black screen. If I do a hard shutdown and restart the system comes back up on the 9600 and runs fine. If I try switching back to the 9400 the same thing happens again (black screen). Obviously the 9400 worked fine when the system was purchased but hasn't been used since then so I don't know at what point the problem initially started. From what I've read, there are problems with some of the NVIDIA chips but it normally affects the higher GPU because of heat, not the lower one.
View 1 Replies View RelatedFor the owners of a uMBP with switchable graphics, how often do you keep your 9600 GT on and what kind of tasks do you use the GPU for? I got the mid-ranged 15" model for the 9600 GT but I can't see myself using it until the release Starcraft II ... and even after I have my desktop with an HD 4870 1GB. Do any of you regret purchasing the model with the 9600 GT?
View 15 Replies View RelatedBenchmarks say 9600 has about twice as much muscle as the 9400 right? So what kind of improvement are we talking about in real life. Especially gaming?
About twice as much frames per second in GPU intensive games like FPS? What about in SRPGs? Similar as well?
I got a MacBook Pro (2.66, has the 9600 graphics card with 256 vram), and I've been amazed by the battery life I get with the 9400. My question is, I don't notice any performance difference between the two graphics cards.
View 10 Replies View RelatedI have a late 2008 MBP with the two graphic cards. Something I noticed was that there was almost no noticeable between the two, even during tasks that would benefit from the 9600, like gaming. For example, to play the Mac Bioshock demo with no lag on max graphic settings, I had to lower the resolution to 1024 by 640 on the 9600. When I tried those same settings on the 9400, it was almost exactly the same performance.
Some I did notice was the under the 9600 stacks appeared much smoother, but scrolling up and down in any window (browser, finder, ect.) was extremely jerky. Under the 9400 scrolling is entirely smooth.
So I am going to be getting a refurb uMBP towards the end of the week and I am trying to decide between the 256mb and the 512mb versions of the 9600M. I will be using it mostly for surfing, blogging, programming, photoshop and gaming. Obviously the gaming is what really poses the question.
I plan to play things like WoW, Aion, L4D2, Borderlands, CoD:MW2, Batman Arkham Asylum, and the like. Obviously this will be done in windows via boot camp.
I heard that to enable the faster graphics, you have to log out and log back in to switch between 9400 and 9600... Is this true? If so, is there any word on when this will be automatic or if there is any current work around?
View 16 Replies View RelatedAre there any improvements using the 9600 over the 9400 when using photoshop or illustrator? I always use the 9400 on my mbp, with the 9600 the fans start to spin really soon, it's so annoying trying to focus on your work with this thing blowing like an airbus.
View 8 Replies View RelatedJust curious because I want to conserve battery and not use as much heat. I don't really need the 9600 that's in my 15" uMBP mid range.
View 10 Replies View RelatedI got an ATI Radeon 9600 Pro All-in-wonder in a box of computer junk. Actually, besides a stick of PC3-6400 memory, it was the only thing that wasn't just an empty box or instruction manual
View 3 Replies View RelatedI'm searching for upgrade video cards for my dual 533Mhz digital audio G4 PM. I've noticed that there are several sellers on eBay selling ATI Radeon 9600's and claim they work on PM G5's as well as PM G4's. [URL]. Could these cards just be stock Apple cards pulled from a G5 that happen to work in a G4, or are they altered or flashed PC cards that work on G5's and G4's. Is it common knowledge that you can pull a 9600 out of a stock G5 and use it in a G4?
View 8 Replies View RelatedI picked up a new ATI Radeon 9600 Pro for my PowerMAC G5 D2.3 to run my 30" ACD.
I was going over the installation booklet and its all in PC lingo.
Just realized my video card is going bad and have an ATI Radeon 9600 XT card w/ 128 mb ddr laying around and was wondering if the two would be compatible? ive heard some rumors about being able to tape over some pins and make it work but was wondering if there were any other answers. The box doesnt mention that it works w/ macs, only windows
View 5 Replies View RelatedJust realized my video card is going bad and have an ATI Radeon 9600 XT card w/ 128 mb ddr laying around and was wondering if the two would be compatible? ive heard some rumors about being able to tape over some pins and make it work [URL] but was wondering if there were any other answers. The box doesnt mention that it works w/ macs, only windows, but im hoping for a miracle hear. Also the box says its 4x and 8x compatible.
View 7 Replies View RelatedI recently purchased a 30" apple monitor to be used in tandem with my 23" cinema monitor. The card that was shipped with my G5 twin 2.5 GZ will not support the 30" as it lacks dual link dvi. Hence the 9600 pro for Mac & PC card. The problem is this...The screens light up at start up but the computer crashes before the boot sequence completes. I took the card to the apple service center where I bought it and it worked fine on both their G4 and G5 machines running Tiger. I cant make it work on mine in Tiger or Leopard.
Information:
G5 twin 2.5
Mac OS X (10.5)
2 drives 750 gig 400 gig
I have a Quicksilver mac will a ATI RADEON 9600 PRO 4x/8x AGP 256MB Dual DVI Video Card - For Mac run any modren game?
View 4 Replies View RelatedCan I have dedicated phsyx enable on the 9400 and use the 9600 as primary for windows 7 for gaming?
View 6 Replies View RelatedI've just got a Radeon 9600 Pro PC/Mac edition, as the 9600XT that came with the G5 died on me last week. It's taken an age to get it working, I could only boot in safe mode, in the end I deleted all my existing ATI extensions, installed the ATI Displays 4.5.7 and it works. BUT ... (and it's a big but)... performance is VERY slow and System Profiler says Core Image and Quartz Extreme are not supported. If anyone's got any ideas I'd be most grateful.
View 26 Replies View RelatedI have a PM Dua 2.0 G5, 9600 nvida and a 23in apple display with no video at all. When i turn on the comp i get no video, i see my cpu blinking 3 times then a 5 sec pause. I have tired taking out the video card and re-seat it as well as the ram, i switch it (rotate it) and reset the PMU button, still no video
Information:
G5 Dual 2.0 1 GB
Mac OS X (10.4.10)
I have a G5 dual (PowerMac7,2) with a Radeon 9600 pro card running an HD cinema display (clear plastic) and want to connect a second smaller 20" Cinema Display with the same type of plug - I think I need a DVI to ADC adapter - is this the case?
View 2 Replies View RelatedI currently have a Core Duo (black) Macbook and i very recently upgraded the hard drive to a new Hitachi Travelstar 7k320.
View 7 Replies View RelatedMy logic board broke on my 07 mbp and i decided to buy a new 15" i7 anti glare 7200rpm. My question is how should i go about getting my files onto my new computer. I have a time machine backup, will it let me just install that onto my new computer? If so, do I want to do this or will that cause problems since its a different machine.
View 2 Replies View RelatedSo for awhile I was following all of the to do about the GPU switching. Eventually I figured I would just deal with it and check back a month or so down the road. So since I've been out of the loop I was wondering if anybody can update me?
I've been using gfxcardstatus and it is very useful but would love to apple to just give us an update.
I am unable to switch on my macbook.tried few times but dont know why.
Info:Mac Pro, Mac OS 9.0.x
Bought a refurbed Macbook but it is running OSX 10.4.11 want to update it as none of my other toys sink up to it iPod, iPhone etc What is needed to update it. These are my specs.
Model Name: MacBook Model Identifier: MacBook2,1 Processor Name:Intel Core 2 Duo Processor Speed: 2.16 GHz Number Of Processors:1 Total Number Of Cores:2 L2 Cache (per processor):4 MB Memory:1 GB Bus Speed:667 MHz Boot ROM Version: MB21.00A5.B07 SMC Version:1.17f0 Serial Number:W8******YA4 Sudden Motion Sensor: State: Enabled
Info:
MacBook, Mac OS X (10.4.11)
Is it possible to switch RAM between two Macbooks? One is 2GB and the other is 4GB. They are both the same model (Macbook, 2008 1st generation unibody)
View 3 Replies View Relatedi bought the 2.26 ghz version, not totally impressed with the speed. will switching to 4gb make like a good difference in the speed?
View 13 Replies View RelatedOne second my battery level will say 4:** remaining and the a minute or so later it will say 5:** remaining and then it will go back up to 7:**. This happens even when its fully charged or plugged in. What do you think it is? normal? Does your new MBP do the same thing?
View 1 Replies View RelatedI decided to try gfxCardStatus from a previous post to get a handle on which card is in use because I really feel like my battery usage is lacking, maybe 3 hours of continuous blogging and word processing. Nothing intensive like video. It showed the dedicated NVidia card. I switched to the Intel and no matter what I tried, I couldn't trigger the GT 330M. Video, every app, many windows. Appears to be a bug to me.
View 7 Replies View Related