My MacBookPro 17-inch mid 2009 is unable to boot AHT
i press the "D" key before the grey screen appears and hold it but with not result.
As soon as i release the key it boots to usual system loading.
What can be the issue or how can I diagnose this. The screen dims sometimes so low nothing is visible. It is happening more often now and can happen after its been on only after 10 min.
Info:
MacBook, Mac OS X (10.5.8), Screen dims un-readably low
Could someone with the 15 inch 2.53ghz model weigh your machine? I just want to know the weight without the 2nd fan and the 9600gt.
View 4 Replies View RelatedI am running A total of 8GB ram on my MacBook Pro 17 inch Mid 2009 model. Is that the most that it can handle or can I put in larger so-dimms? Like 2-8GB So-dimms.
View 3 Replies View RelatedI'm looking to the size of the Hard disk drive in my 2009 17-inch pro. But can't find if the case will take a 1T HDD or not. As the 1T drive are around 12mm and not 9.5mm of the smaller one right now.
Info:
MacBook Pro, Mac OS X (10.7.3)
I have a 2009 mac mini with dual display. One mini display port and one mini dvi port. I would like to buy two of the recently discontinued 24 inch led display. I know I can connect one monitor via the mini display port.......my question is how would I connect the second display?
Is there a mini dvi to "mini display" adapter?
i just bought the imac 21.5 inch with ati radeon 4670 and the base spec. after few hours of playing with this new toy. i realise that when you press the shutdown button, it will put the imac to sleep instead of showing the shutdown/restart option that i have on my macbook. Is there any way to make it work like a macbook power button. secondly, whenever my imac wake up after sleeping, the fan will run faster and automatically went to sleep again. this issue just keep repeating itself. i have no choice but to shutdown the imac and boot up again. Thirdly, i try the machine on WoW and i realise that the sound is rather choppy
View 2 Replies View Relateddoes my imac 24 inch 2009 model have a memory card slot? if so, where is it located?
Info:
iMac, Mac OS X (10.7.3)
why can't i turn down the monitor brightness in target display mode? volume keys and cmd-f2 works as described, but brightness keys do nothing?
Info:
iMac, Mac OS X (10.7.3)
I would like sometimes use my PC and I would like to use 2010 iMacs display as my PC's display.
Info:
iMac (27-inch Mid 2010)
early 2009 Intel iMac 24". OS 10.6.8.
Working in Excel today, I was highlighting groups of cells with color when the entire screen suddenly had a pale grey-green tint. Can still see colors beneath, but everything tinted (not just the Excel window, but the entire display). White, of course, is most dramatic. The Dell monitor beside it is fine.
I've recalibrated color a half dozen times (have always had to do that to get the Dell and iMac screens as similar as possible). It's impossible to get white on the Mac. Rebooted several times, including hard boot, zapped the PRam, ran Permissions Repair and Disk Repair from the startup CD. Installed Temperature Monitor to see if there's a heat problem, but I could not find normal temp values anywhere on the Web, so that was something of a bust. Temps attached below in case there's an educated set of eyes out there....
Ran some online tests, too, for color distortion, dead pixels, that kind of thing, but nothing reveled.
I've been all over the Web looking for some guidelines, but most posts at apple and elsewhere seem to focus on later-model iMacs with the yellow lower screen problem when new (It's not that) or panic screens of wild colors, stripes, and the like. This is just a grey-green tint that covers the entire screen, rendering whites grey-green and colors muddy.
I had a wireless keyboard I was working on and had set up a password, the keyboard has broken and is damaged how do I get in the computer?
View 2 Replies View RelatedI just set up my new MacBook Pro 13-inch with Boot Camp. Initially I put Windows 7 RC on it, but I couldn't get the audio control function keys to work. Figuring Win 7 is probably quirky, I figured I'd drop back to Vista for now until 7 is officially supported. (Interesting how easy Apple makes it to annihilate a Boot Camp partition. :) So now I have Windows Vista Ultimate SP2 running with no issues. All the Boot Camp drives and utilities seem to be working. However, with all the sounds cranked to max in Windows, and using the F12 key, the volume is very quiet. Probably less than half of what I can get in OS X.
View 24 Replies View RelatedMy friend has an Apple MacBook 13.3-inch 2GHz (model number: A1181). When I boot up the computer, the screen is gray and does not proceed to show the Apple logo. The MacBook continues to show the gray screen for quite a while. What can I do to identify some of the problems with this computer? The one caveat: I am in La Habana, Cuba and there is no concept of an Apple Store or Mac support.
the other night my girlfriends white 2009 Macbook (was updated to lion) stopped recognizing the battery. Only would boot when plugged into AC. I have other Macs so I tried different power adapters and switching in a battery that I knew was charged from another Macbook, and still did not recognize. Both batteries show 80% full or more when button pressed on battery. I moved it to my office to debug, requiring that I shut down and move the power cord. Then when I booted up, it started shutting down 10 seconds after reboot to user screen. I did the SMC reset and the PRAM resets, did Safe mode checking. Mac would still not "see" the battery or stay on for more then a few seconds even on AC. I then used the Snow Leopard install DVD and disc utilities, did a complete erase of the hard drive and reinstall of the Snow Leopard DVD. That took around 30 minutes, and the Macbook stayed on the entire time during reinstall. 1st boot after reinstall, stayed on long enogh to "set up" a user, then the shutdown problems appeared again.
Not entirely sure, as the power light on the front has been faulty for over a year, so i can not see if it is "on", but if I plug in a thimb drive, the thumb drive light blinks as if it is getting poweer, I would think thta means the computer is on, maybe the display is just shutting off? I do not have the original install discs, just the Snow Leopard 10.6.3 install DVD and a Lion install thumb drive, how can I do a AHT?
White Macbook early 20092 Ghz Intel Core 2 Duo2 Gb Ram
120 GB Harddrive
Serial W8909P004R1
Info:
MacBook, Mac OS X (10.6.3)
Is it normal for my fan to be at 2700 rpm when I boot my computer. Once I reach the desktop the fans slowly decrease to 1900-2000. Is this normal?
View 2 Replies View Relatedwhen I boot my computer, it goes to a "DOS" screen and tells me that there is no bootable drive. So I try again pressing down the alt button and I get my mbp hard drive option. I click on it and after about 15 minutes screen comes up (my last view before turning off last night) and mouse is the only thing working. (everything else frozen). I used to run bootcamp with windows 7 before but I've cleaned out the hard drive and was only running snow leopard.
View 8 Replies View RelatedI have an old IMac G5 without an Intel processor. The other day I heard a whistle sound coming out of it. The next day I turned it on, got the apple and a revolving pinwheel. The picture of the apple was a little broken up. After a minute the pinwheel stopped. Tried to boot of the leopard CD. Same thing happened. Looked inside for swollen capacitors. Did not find any. Does anyone have any ideas as to what can be wrong.
View 2 Replies View RelatedI have an Early 2009 Mac Pro system (Mac Pro 4,1) and I've had this system for 3 years already and have been working under OS X with this system ever since I purchased it. However, when I tried to boot off my Windows disk, something very interesting happens. The Mac Pro WILL NOT boot up off the Windows disk or a known working Windows partition if two monitors are connected. Upon holding down the option key and selecting the Windows partition, I will get a black screen on one monitor (the one connected via Mini Displayport) and the other screen receives no signal and will enter standby and the system is halted. It does not respond to keystrokes, there is no hard drive activity, no measured power increase on the UPS, no apparent network activity, nothing. The only way to exit this scenario (from what I can tell) is to power off the machine, disconnect the display on DVI, power on the machine again, select the Windows partition wait for the system to reach the login window and reconnect the DVI monitor (at which time Windows recognizes it immediately and the system works fine again).
I have two Samsung P2350 monitors attached to an ATI Radeon HD 4870 (512MB, from Apple). One is monitor is connected via directly DVI and the other is using a Mini Displayport to DVI adapter. Both monitors work fine under OS X with no issue. At first, I thought that this may be a driver issue on the Windows side and after installing all the latest updates and drivers the issue is still apparent. From what I can tell, this doesn't seem like a software issue but rather a firmware or EFI issue as this happens before Windows even loads. For the record, I am running all the latest software builds on the OS X side (10.7.4, not that it would really matter at this point). I have also disconnected all unnecessary equipment in a trial and error scenario but the results are still the same. The system passes all ASD testing. The full specification of the computer and all connected equipment are as follows:
2009 Mac Pro (4,1) 8-Core
2x Intel Xeon Nehalem 2.66GHz Quad-Core CPUs
16GB DDR3 ECC 1066MHz RAM (Apple Branded)
Two OWC 120GB SSDs (One for OS X, the other for Windows 7 x64) - These are in place of my optical drives.
4x 2TB WD Black Hard drives for storage.
Two Samsung P2350 Monitors connected via DVI. (One using a Mini Displayport to DVI adapter).
Ok I got my new 21.5 inch but every time it boots up, it takes 45 seconds on a white screen then another 30 after the apple appears.
View 5 Replies View RelatedBattery
I had a 11 inch air 1.4GHz/4GB/128GB for two weeks. I usually set the brightness to 75% and for consistent web browsing (no heavy flash) I can get about 5h15min battery life. I noticed someone here claiming 8+ hours battery on 13 inch so I decided to give it a shot.
I got a new 13 air with 1.86GHz/4GB/128GB yesterday and start to run on battery immediately. I was disappointed. The brightness was also set to 75% and I start to count the time from 25% while browsing MacRumors.com. And it only took 1h38m for battery descending from 25% to 0%. Again, pure web browsing and no heavy flash.
So here is my conclusion: On 75% brightness, 11 inch air's battery performs beyond advertised 5 hours and 13 inch's battery performs fair and normally should give you around 6h30m~7h.
Noise
I don't have equipments for measuring the noise, but while copying the same 10GB files from external drive to the machine, the fan noise from 13 inch is much louder than 11 inch.
Now I like my 11 inch more in general, although I really hate the 1366 x 768 screen. I don't know if I should sell the 13 inch or 11inch...
[edit]:
On my 11 inch air: battery capacity 4664
On my 13 inch air: battery capacity 6634
[edit2]:
I will do another test to see how long exactly my 13 inch can last after a full charge
Hi Folks. Minor problem with the new system...
Here's the situ:
32Gb Boot Camp partition created and installed XP SP2 from original disc.
Inserted Mac Pro DVD to install the driver set (which was Boot Camp 2.1)
Everything working correctly, except the sound - which comes out both the Mac Pro internal speaker and the LEFT channel of my external amplifier.Everything working fine through Mac OS X as expected.
In Windows, I can change the audio out device from Realtek Audio out to the USB audio (which is the Apple Cinema Display speakers) but this is far from ideal for games, which is the only reason I'm installing XP. I have installed XPSP3 since and found a more up to date Realtek HD audio driver for XP, but no change.
Has anyone experienced this? I may try to install XP again, install XPSP3, then install all the drivers manually as required to see if that changes anything.
I've been using boot camp to run windows on my new mac pro (2009) but the internet has been really slow. On the mac side the internet connects at full bars but the PC side says low.
View 1 Replies View RelatedHere's a fun problem. After installing Sophos anti-virus and starting a (VERY slow) full scan, a day or two later I found my iMac frozen at the screensaver. It was completely unresponsive so I did a hard reboot, at which point it got as far as starting to boot Lion (apple logo on screen, spinning indicator showing) before stalling indefinitely in that state with the indicator spinning.
I restarted and booted from the recovery partition, launched disk utility, and discovered that the SMART status of the drive was "failing". The machine would still boot from the recovery partition and my boot camp partition, but I assumed that the disk failing was why the OSX partition wouldn't boot (the recovery partition worked, as did the windows 7 bootcamp partition). I replaced the factory-installed internal HDD with another of the same make, model, and capacity (Seagate 1TB), and performed a restore from the Time Machine backup on my Drobo.
The result was the same as the original problem - it wouldn't boot, hung with the indicator spinning. Thinking that the Sophos scan was somehow responsible (in-progress when the last TM backup was made) I tried restoring to a backup a few days older, (to the best of my recall from BEFORE I downloaded Sophos) only to have the same result.
Anyone have any ideas? I made a clean install of Lion (using the recovery partition on my old internal HDD, now connected externally via USB) to an external drive while I was waiting for the replacement hard disk to arrive, and it boots fine from that. I haven't tried a clean install to the internal HDD yet, as I'd obviously prefer to recover my installed apps as they were before, that being the point of a Time Machine backup, right?
Info:
iMac, Mac OS X (10.7.3)
To those contemplating on picking up the 11-inch MacBook Air or the 13-inch MacBook Air, I thought it would be helpful to list the differences between the two.
Below is what I've compiled so far (in no particular order):
1) SD Card Slot is on the 13" MacBook Air, not present on the 11"
2) Higher clock speed configurations on the 13" (1.4 GHz/1.6 GHz vs. 1.86 GHz/2.13 GHz)
3) 6MB of shared L2 Cache on the 13" vs. the 3MB on the 11"
4) 1066 MHz frontside bus on the 13" vs. the 800 MHz on the 11"
5) Larger capacity battery and an extra 2 hours of battery life on the 13" (7 hour 50-watt-hour battery on the 13" vs. 5 hour 35-watt-hour battery on the 11")
6) Slightly larger trackpad and more room for your palms while typing (hey, it's true!)
7) 16:10 1440 x 900 13.3" Display vs. 16:9 1366 x 768 11.6" Display
8) The 13" model weighs in at 2.9 pounds while the 11" weighs in at 2.3 pounds. .5 pound weight difference
If you have anymore differences between the two models, post below and I will add them to the list!
I am trying to use my HD Sansui 32 inch LCD TV as a monitor for my Macbook. I can't work out how to set it up properly. My macbook is running OS X 10.5.8. My TV supports 1920 * 1080 HDMI 60Htz NTSC and various other resolutions. I am using a mini DVI to DVI adapter and then a HDMI lead to the tv. Problem one is that when I switch the Macbook on and close the lid nothing comes up on the TV screen (meaning it is supposed to only driving one screen, the TV). If I do this with the VGA connection it will. Momentarily the apple symbol will come up and the little circle below it but then my TV says signal not supported.
If I have the Macbook lid open when I switch the computer on both screens will work and I can select 1080P, however it is very grainy and not pleasant to read text. I think it looks better using the VGA. I have heard of people getting nice crisp display with HDMI so I am wondering if I am missing something? Is there any other software that can be used to get better results? Which text smoothing settings should I use? Are there other settings? I am using it on my desk so I guess it is about 2 foot from me. I will post my display details in a minute but my computer details are the following:
2.2 GHz Intel Core 2 Duo
1 GB 667 MHz DDR2 SdRam
Just got done loading 8gb of ram and my OCZ vertex 2 ssd 40gb. Load Time of apps is amazing. My one question is boot time went from 48 seconds to 33. Should I be getting better. I used carbon copy to clone drve and I'm only using 14 gb of the 40 that's there. I domhave to say these setup screams at certain jobs.
View 3 Replies View Relatedi got a MacPro 09 8 Cores and has no power, i tried taking it down to minimum configuration, I suspect the backboard to be the culprit. I'm an Apple Tech and work at a service center, I already ordered Power Supply and backboard.
Ive been reading that I can use a flathead screw driver to turn on computer by shorting two pads on the board.. i checked the service manual and says nothing on how to jump it, but that u can.. has anybody tried jumping the Mac Pro through the Pads?
I'm new to this OS, which is a iMBP 13" (2009 revision). I'm experiencing abnormal bootup. The bootup screen display a prohibition sign upon bootup after installing Security Update 2010-001 for Snow Leopard. There is no error message I can write down nor excessive fan noise coming out from the laptop.
View 3 Replies View RelatedMy imac from 2009 won't boot up. It just keeps flashing a grey file folder with a question mark. Of course now I do not know where my start up cd is.....is there anything that I can do???
Info:
iMac
