Mac Pro :: 2009 Will Not Boot-up Under Windows
Jun 4, 2012
I have an Early 2009 Mac Pro system (Mac Pro 4,1) and I've had this system for 3 years already and have been working under OS X with this system ever since I purchased it. However, when I tried to boot off my Windows disk, something very interesting happens. The Mac Pro WILL NOT boot up off the Windows disk or a known working Windows partition if two monitors are connected. Upon holding down the option key and selecting the Windows partition, I will get a black screen on one monitor (the one connected via Mini Displayport) and the other screen receives no signal and will enter standby and the system is halted. It does not respond to keystrokes, there is no hard drive activity, no measured power increase on the UPS, no apparent network activity, nothing. The only way to exit this scenario (from what I can tell) is to power off the machine, disconnect the display on DVI, power on the machine again, select the Windows partition wait for the system to reach the login window and reconnect the DVI monitor (at which time Windows recognizes it immediately and the system works fine again).
I have two Samsung P2350 monitors attached to an ATI Radeon HD 4870 (512MB, from Apple). One is monitor is connected via directly DVI and the other is using a Mini Displayport to DVI adapter. Both monitors work fine under OS X with no issue. At first, I thought that this may be a driver issue on the Windows side and after installing all the latest updates and drivers the issue is still apparent. From what I can tell, this doesn't seem like a software issue but rather a firmware or EFI issue as this happens before Windows even loads. For the record, I am running all the latest software builds on the OS X side (10.7.4, not that it would really matter at this point). I have also disconnected all unnecessary equipment in a trial and error scenario but the results are still the same. The system passes all ASD testing. The full specification of the computer and all connected equipment are as follows:
2009 Mac Pro (4,1) 8-Core
2x Intel Xeon Nehalem 2.66GHz Quad-Core CPUs
16GB DDR3 ECC 1066MHz RAM (Apple Branded)
Two OWC 120GB SSDs (One for OS X, the other for Windows 7 x64) - These are in place of my optical drives.
4x 2TB WD Black Hard drives for storage.
Two Samsung P2350 Monitors connected via DVI. (One using a Mini Displayport to DVI adapter).
View 4 Replies
ADVERTISEMENT
Apr 30, 2009
I've been using boot camp to run windows on my new mac pro (2009) but the internet has been really slow. On the mac side the internet connects at full bars but the PC side says low.
View 1 Replies
View Related
Mar 28, 2009
I think it worked at one point, but sometime around the point when I set up Fusion with the partition, Windows Aero turned off and is no longer an option in the display settings. I installed this driver with the modded INF to see if it would do anything, but Aero is still not an option. I also have issues playing some games in Fusion, while they work fine in Boot Camp.
View 7 Replies
View Related
Jul 14, 2009
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
View 9 Replies
View Related
Apr 6, 2009
Hi Folks. Minor problem with the new system...
Here's the situ:
32Gb Boot Camp partition created and installed XP SP2 from original disc.
Inserted Mac Pro DVD to install the driver set (which was Boot Camp 2.1)
Everything working correctly, except the sound - which comes out both the Mac Pro internal speaker and the LEFT channel of my external amplifier.Everything working fine through Mac OS X as expected.
In Windows, I can change the audio out device from Realtek Audio out to the USB audio (which is the Apple Cinema Display speakers) but this is far from ideal for games, which is the only reason I'm installing XP. I have installed XPSP3 since and found a more up to date Realtek HD audio driver for XP, but no change.
Has anyone experienced this? I may try to install XP again, install XPSP3, then install all the drivers manually as required to see if that changes anything.
View 13 Replies
View Related
Jun 29, 2014
My MacBookPro 17-inch mid 2009 is unable to boot AHT
i press the "D" key before the grey screen appears and hold it but with not result.
As soon as i release the key it boots to usual system loading.
View 1 Replies
View Related
Apr 14, 2012
Here's a fun problem. After installing Sophos anti-virus and starting a (VERY slow) full scan, a day or two later I found my iMac frozen at the screensaver. It was completely unresponsive so I did a hard reboot, at which point it got as far as starting to boot Lion (apple logo on screen, spinning indicator showing) before stalling indefinitely in that state with the indicator spinning.
I restarted and booted from the recovery partition, launched disk utility, and discovered that the SMART status of the drive was "failing". The machine would still boot from the recovery partition and my boot camp partition, but I assumed that the disk failing was why the OSX partition wouldn't boot (the recovery partition worked, as did the windows 7 bootcamp partition). I replaced the factory-installed internal HDD with another of the same make, model, and capacity (Seagate 1TB), and performed a restore from the Time Machine backup on my Drobo.
The result was the same as the original problem - it wouldn't boot, hung with the indicator spinning. Thinking that the Sophos scan was somehow responsible (in-progress when the last TM backup was made) I tried restoring to a backup a few days older, (to the best of my recall from BEFORE I downloaded Sophos) only to have the same result.
Anyone have any ideas? I made a clean install of Lion (using the recovery partition on my old internal HDD, now connected externally via USB) to an external drive while I was waiting for the replacement hard disk to arrive, and it boots fine from that. I haven't tried a clean install to the internal HDD yet, as I'd obviously prefer to recover my installed apps as they were before, that being the point of a Time Machine backup, right?
Info:
iMac, Mac OS X (10.7.3)
View 4 Replies
View Related
Jun 24, 2012
the other night my girlfriends white 2009 Macbook (was updated to lion) stopped recognizing the battery. Only would boot when plugged into AC. I have other Macs so I tried different power adapters and switching in a battery that I knew was charged from another Macbook, and still did not recognize. Both batteries show 80% full or more when button pressed on battery. I moved it to my office to debug, requiring that I shut down and move the power cord. Then when I booted up, it started shutting down 10 seconds after reboot to user screen. I did the SMC reset and the PRAM resets, did Safe mode checking. Mac would still not "see" the battery or stay on for more then a few seconds even on AC. I then used the Snow Leopard install DVD and disc utilities, did a complete erase of the hard drive and reinstall of the Snow Leopard DVD. That took around 30 minutes, and the Macbook stayed on the entire time during reinstall. 1st boot after reinstall, stayed on long enogh to "set up" a user, then the shutdown problems appeared again.
Not entirely sure, as the power light on the front has been faulty for over a year, so i can not see if it is "on", but if I plug in a thimb drive, the thumb drive light blinks as if it is getting poweer, I would think thta means the computer is on, maybe the display is just shutting off? I do not have the original install discs, just the Snow Leopard 10.6.3 install DVD and a Lion install thumb drive, how can I do a AHT?
White Macbook early 20092 Ghz Intel Core 2 Duo2 Gb Ram
120 GB Harddrive
Serial W8909P004R1
Info:
MacBook, Mac OS X (10.6.3)
View 1 Replies
View Related
Sep 29, 2010
Just got done loading 8gb of ram and my OCZ vertex 2 ssd 40gb. Load Time of apps is amazing. My one question is boot time went from 48 seconds to 33. Should I be getting better. I used carbon copy to clone drve and I'm only using 14 gb of the 40 that's there. I domhave to say these setup screams at certain jobs.
View 3 Replies
View Related
Feb 8, 2010
Is it normal for my fan to be at 2700 rpm when I boot my computer. Once I reach the desktop the fans slowly decrease to 1900-2000. Is this normal?
View 2 Replies
View Related
Nov 9, 2009
I have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
View 3 Replies
View Related
Jan 25, 2010
I'm new to this OS, which is a iMBP 13" (2009 revision). I'm experiencing abnormal bootup. The bootup screen display a prohibition sign upon bootup after installing Security Update 2010-001 for Snow Leopard. There is no error message I can write down nor excessive fan noise coming out from the laptop.
View 3 Replies
View Related
May 4, 2012
My imac from 2009 won't boot up. It just keeps flashing a grey file folder with a question mark. Of course now I do not know where my start up cd is.....is there anything that I can do???
Info:
iMac
View 14 Replies
View Related
Sep 23, 2009
I would rather not have to sell my MacPro, but for some financial reasons, I may have to. The specs of the machine are in my sig, but if I can get these add ons to work in Windows, I think I can sell my HP HDX instead. Anyway, I know these cards wont work in OS X, but would they work/ fit if I used them in Windows with Bootcamp? [URL:...] Since it's only PCI e x1, it won't work will it? Can anyone suggest a tuner that will work inside a 2009 MacPro in Windows? I am not a fan of the elgato, so that option is out. [URL:...] If this sound card won't work can you suggest another one? My situation is to get rid of the HP and use my MP as my HTPC/ Work PC, or to sell the MP and my 24" ACD for a new iMac when they come out and then build my own HTPC since I have a New Egg preferred account and could put the money off for a little.
View 1 Replies
View Related
Nov 3, 2010
I have installed windows XP on my Mac Pro and am trying to connect to the internet through a wired connection, which works just fine on OSX.
When I go into device manager, it doesnt even register that I have a way of connecting to the internet.
View 6 Replies
View Related
Aug 26, 2009
Hello, I have a 2009 Quad and sometimes the sound works in vista and sometimes it doesn't. Does anyone know why or know of a fix?
View 1 Replies
View Related
Dec 26, 2009
i have Snow Leopard running in a RAID, and just a separate single drive installed for windows 7. Problem is, when i try to go to bootcamp assistant, it tells me that RAIDS aren't supported in bootcamp. I don't want to install it on my raid, just on the other single drive. Does anyone know a workaround or how to do this?
View 24 Replies
View Related
Dec 25, 2008
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
View 4 Replies
View Related
Feb 18, 2010
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
View 15 Replies
View Related
Feb 19, 2010
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies
View Related
Jul 6, 2010
Have the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
efiboot loaded from device: Acpi(PNP0A03,0)/Pci(1|1)/Ata(Primary,Master)/HD(Part 2,Sig********-****-****-****-************)
boot file path: SystemLibraryCoreServicesoot.efi
.Loading 'mach_kernel'...
................................................................................
View 6 Replies
View Related
Jul 20, 2009
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
View 4 Replies
View Related
Sep 15, 2009
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
View 4 Replies
View Related
Oct 24, 2009
Last night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
View 8 Replies
View Related
Jul 26, 2010
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
View 1 Replies
View Related
Mar 26, 2009
I burned numerous dvd's with my old Toshiba laptop for all of my videos and such with Windows XP. Now after my Toshiba crapped out and I switched to a Mac I was wondering why when I put the DVD into the laptop (MacBook Pro Intel processor) why I can only see the name of the dvd and not the contents. I hope someone can help me since I hate having to boot up Windows in Parallels and then play using Windows or drag it to my mac partition since this takes time and I just really hate having to see Windows load on my Mac. Anyones help is greatly appreciated.
View 1 Replies
View Related
Feb 15, 2009
I use to be able to select the vista partition to restart into from the configuration pages in leopard on my macbook pro, but now my bootcamp partition is missing. I have to hold the option button to manually select the windows partition and then load into windows. Some setting somewhere must be lost. Does anyone know how to restore it?
View 2 Replies
View Related
Nov 12, 2009
This is my first post here... even though, I've read a lot of the things on this forum, but never decided to post a question 'til now... now that i bought a macbook pro that is.
Actually I have some sort of annoyance with boot camp. It works as it's intended (with windows 7, which is a miracle, because everyone complains about that combination). But whenever I boot up and press "alt" to select the hard drive i want to boot, it always shows Windows. Can i change it for something else? and, how can I do it? Both of my partitions have names of their own... they're not generic... but still, they are not working, what can I do??
View 4 Replies
View Related
Dec 15, 2009
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
View 8 Replies
View Related
Jan 20, 2010
Would have checked this myself but I haven't gotten around to installing Boot Camp 3.1 yet.
Anyone with a uMBP try to see if Boot Camp 3.1 allows the keyboard light to completely shut off in Windows 7?
I described it more here.
View 10 Replies
View Related
