I have recently installed Snow Leopard on my aluminum Macbook . I dont have a lot of GB available, so I decided to reinstall Leopard and then install Snow Leopard again for more GB. I accidentally inserted the iMac install disk 1 (Not the Macbook install disk), because I have a iMac as a home computer. When I inserted the install disk, it tells me to restart my computer. I click Restart. But, after trying to boot, it comes up with the white screen. This lasts for about 15 seconds. After 15 seconds, my Macbook restarts again! It keeps repeating to restart over and over again. After about 15 restarts, I tried and ejected the disk and restarted my Macbook without the disk and see if it cancels the installation. When I boot it up with no disk, it cant read my HD anymore!
I picked up an 80 GB Intel x25-m yesterday and installed on my 15" i7 MBP but could not get the Snow Leopard disc to show up holding option, and tried "c" at boot.As a work around, I tethered the MBP to an iMac via firewire and installed Snow Leopard on the MBP but after, it would display the apple logo but not boot.
My Snow leopard machine hangs during startup at the screen with the Grey Apple logo. It appears there is a SW issue with my OS X boot partition. Here are facts I have learned:The computer boots fine if I hold option at startup and select my boot camp partitionThe compute boots fine if I attach an external HD with OS X 10.6Running a disk repair from the external HD, I see the following two issues that are repaired. Also, note the last line about boot partitionsAfter this disk repair, the disk will still not boot, it hangs at the Grey Apple logo.Booting in safe mode does not resolve the issue, the machine will still not boot to a desktopBooting in Verbose mode, drivers initialize with the last succesful line being the ethernet drives (I believe) and then the hangup occurs. It is unclear what state the boot process is at on the hangup.Â
This situation has happen twice in the past few weeks. The first time I did a reinstall of OS X to resolve the issue. Then, the issue appeared again approximately two weeks later. I'm hoping to avoid a second reinstall (And really, avoid this issue in the future). It seems perhaps something in the boot partition table or the OS partition, although disk utility says the partition is fine. I have downloaded Test Disk 6.13 to look at the partition table, but I don't know how to interpret the outputs of that program. Â
Info: MacBook Pro (15-inch Core 2 Duo), Mac OS X (10.6.3), 2 GB RAM, Boot Camp, Ex HD avail
macbook pro blue screen with spinning disk, won't start up. my macbook was really sluggish so i ran a hardware test. it said NO PROBLEMS. i did restart. my current login and password were REJECTED. then the macbook went into blue screen and it just sits there and flashes to gray and back to blue and the white lines that make up the circle icon just spin and spin.
I have a Macbook 1.8Mhz, inter core duo 2, 13", 80Gb HD and the problem that i have is that at startup there is a question mark folder (i know it means that the system folder of my HD could not be found), i alredy tried everythng from resteting the RAM parameters passing by the secure mode, user mode, verbose mode, and nothing happends, i tried also the CD harware test (from de cd 1 that came with my MB) but as i have Mac OS X Leopard does not work and the utilitiy Disk from the Mac OS Leopard install disk too. So please tell me if there's any solution apart of taking it to the apple guys (if there is any of course)
I bought a used macbook yesterday morning and everything seemed to be working properly at first, but by the end of the day it started having a problem when booting up. 2 gigs of RAM (updated by previous owner)160 gig Hard Drive (updated by previous owner)Everything else is the same as this listing. The problem: when booting up, the screen turns on, but just remains white, without showing the apple logo and spinning circle. I left it like that for a good 10 minutes, and it never continued to boot, it just stayed in that state. I shut it off, then started it in safe mode, which worked fine. From there I restarted it, and it worked normally. The same thing happened again later (white screen, turn off, boot in safe mode, boot normally).
So just recently, whenever I restart my mbp and hold down the option key for the bootcamp option, it is taking atleast a minute to get the option of either mac os or windows to be displayed. Earlier, this was very feasible as the options would be displayed rather instantaneously. Could someone please help me out as the wait time is horrendous to the least.
In the process of doing clean install from tiger to leopard and I'm running into some issue. 1st attempt - was stuck on initial "Install" screen (After I erased my HD and selected drive to install but before the Install screen changes to show the status of the install remaining) for 35 minutes. I stopped the install and restated.2nd attempt - Finally got to the progress bar, 28 minutes remaining. However, it didn't move from there. I checked the Installer Log and it kept trying to install printer drivers and foreign fonts, but unsuccessful. Finally got an error message stating install was not complete. Restart.3rd. attempt - This time I unchecked printer drivers and fonts. Progress bar stated 18 minutes, now it's down to 17 (after like 10 minutes) and according to the Installer Log I keep getting errors in stuff (Error writing caches to /Volume/...., Input/output error, Failed to enumerate /Volumes/...., Cannot prune("com.apple.user*pictureCache*"). However, according to the progress bar, it keeps moving through the processes, still show 18 minutes now.
With Snow Leopard being so much smaller and lighter than previous versions of OS X are there still things to cleanup after a new install? Do programs like XSlimmer still do much? If there are still things to do, are there programs updates for Snow Leopard to automate this?
i noticed that today, when i right click on a folder (to organize for example) such options appear in numbers such as N148 instead of saying arrange by or whatever. It looks this way with most options.
Info: MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.5)
A clean installation took about 13 minutes from start to finish, which is a world of difference from the hour or so that a clean 10.5 Leopard install takes. Other then the time involved, there are very few differences between the 10.5 and 10.6 installation processes at this time.Once you're up and running, it feels very similar to Leopard. I don't know how much this will change through Snow Leopard's development, but don't expect a terribly different interface. The subtle changes to the current Aqua definitely look good though.
Just recently I've noticed this more than before... If I open a new tab, almost every time I'll get a spinning pinwheel for about 5-10 seconds, then it'll start responding again. Sometimes it'll do it for other things too, but for the most part its opening new tabs.
In iTunes when I right click on a song and click "get info", then change some info, it doesn't stick. It goes right back to what I already had in there before. I then realized that this is because every file inside my iTunes music folder is set for "read only" and not "read & write". So after I change it to "read & write" all changes I make in iTunes will take. However, I have a lot of music and therefore a lot of files inside my iTunes music folder. Going into each and every folder to change its permission to "read & write" would be tedious and time consuming,
Tiger to Snow Leopard and then found out I had lost my connection to the Netgear WGPS606 Print server that for years has served me flawlessly to use my HP Photosmart 8100 printer. Apparently it has something to do with Apple having removed support for Appletalk (???) Searching the web and Netgears website I can only find the instructions for Tiger, which I already had back when I first set up the print server.
My startup HD always appeared in desktop.But since I formatted it and installed Leopard again it doesn't mount automatically in desktop.How do I do to mount it in desktop?
My MAC PRO has been running very well but recently, it has slowed down hugely at startup. Here is the Console log:Â
23/04/2012 09:37:46com.apple.launchd[1]*** launchd[1] has started up. ***23/04/2012 09:37:57com.paceap.pacesupport[64]com.paceap.kext.pacesupport.snowleopard failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).23/04/2012 09:37:57com.apple.launchd[1](com.paceap.pacesupport[64]) Exited with exit code: 7123/04/2012
my iMac wont start up following and updates,I think its a late 2010 model.. I left it on for hours - still no joy it just got hot. I have Disk-warrior but i cant put a disc in.
One morning my Mac Mini would not startup, it would try to start up but after about 2 minutes the Apple would turn to the circle with a diagonal line through it. Fortunately I had installed Snow Leopard on my external Firewire 800 drive so I could startup from that drive. My internal drive now will not mount when starting from my external drive until I rebuild the drive using Drive Genesis and then run Volume Structures with Tech Tool V5.0. No other combination of utilities seems to work to make it mount. Not sure if that would makes sense to anyone that might know what is wrong and how to fix it so I could startup from my internal drive.Â
I have also tried to reinstall Snow Leopard but when starting from the install DVD the internal drive does not show up as an option for installation. I am trying to startup at least one last time from my internal drive since I have a Filemaker Pro 7 database which I have forgotten the password for but when starting up from my internal drive it opens since the password is stored in Snow Leopard. I have found programs using Windows to change or extract the FM7 password but I am trying not to spend the $30 to $40 for a program I will only use once.Â
I would like to have a start-up DVD of the latest/last version of Snow Leopard, and I understand that I can purchase a Snow Leopard DVD from the Apple store. Is it the latest ie 10.6.8, or the original.Â
I see a lot of people suggesting that perhaps because the poster had less than 10gb (which is my case as well-- I have around 8), that this is why this message is happening. Well, my response to that is:
1)I have had around 8gb free for months, and these messages only started appearing in the last week. Each time I go "???" and look at my finder to see 8.4gb free or whatever, and I am like "WHY ARE YOU TELLING ME I AM OUT OF SPACE?
2)in the terminal, I was trying to download a few 20-30mb files, and wget quit out on me saying "insufficient storage space left on device".and doing "df -h" shows me that I have almost 10% free.. and again this is a 20-30mb, so this is total nonsense.
Are there any suggestions as to what might be causing this and a course of action, other than being told: "copy your files to an external hard drive and delete them on your startup disk".
The problem is, each time I restart my computer or put it back on again, it takes around 20 mins to start up. At the grey screen there is a grey bar that takes 20 mins to load.
I am running Snow Leopard on a new Power Mac which is part of a windows network. On the Windows server, there are a couple of shares that I would like the mac to use. I can manually connect to them and browse ok, but what I would really like to do is have them automatically load on startup and display on the desktop. I have tried connecting to the them and then dragging them into the login items, but on restart, they don't appear on the desktop.
I've got a Late 2009 Mac Mini running Snow Leopard Server. Occasionally, it takes me awhile to restart after updates, so this could be due to the most recent update or possibly the combination of the last two...
I went into my office, saw that there was a Safari update and decided to let it do its thing. When I came back 30 minutes later, my machine was off. I turned my machine back on, got the gray Apple screen with the spinning cog and the progress indicator for the update. A little over 10% through, the progress indicator reset. No biggie, I figured. Second time it got to the same point, it just shut down. Nada. When I restart, it does the same thing.
Info:Mac mini (Late 2009), Mac OS X (10.6.8), Snow Leopard Server
2QuadCOre 2x3,2 GHZ , 10.6.8 MAc Pro -very annoying issue.Starting normally I cannot pass grey screen of death . The only way to pass this point is to force restart with alt key pressed - and then click on my startup drive ( i have several drives with OSX ) I have been runninmg disk utility / repairing priviliges etc . Obviosly my system drive is chosen and locked in system preferences.  Â
Info: Mac Pro, Mac OS X (10.6.8), MacPro 6 Core, 24 Gig RAM 10.6.4, Imac 24 inch 10.5.6
I've had my Macbook for a couple years. I'm not someone who downloads a ton of stuff, but I suspect that my sluggish performance is due to the many startup items I have.Using iBoost, I've identified many, and know where they are, but I don't know which ones are necessary. [code]
My dock won't reappear. I've gone to Terminal and typed killall Dock, and it says there is no process called that. So after literally two days of troubleshooting, I found the Dock.app file, and when I click it, the dock opens, my wallpaper (which was permanently blue) comes back, everything is fine. Until I quit. Then the Dock is missing again. So the Dock obviously isn't launching upon startup or login.
