It is getting stuck on the Apple Logo in white page with spinning gear. The apple logo keep disappearing and come again endlessly.
Info:
MacBook Pro, Mac OS X (10.0.x), Actually I only know it is OS X.
So this morning i turned on my alu macbook (2.0ghz, 2gb ram) and i'm stuck on the apple logo and spinny thing at the bottom, i've searched here and the apple site but can't find a solution.
View 24 Replies View RelatedI have a major problem with my first Generation MacBook Pro. It won't boot anymore: it just turns on and gets stuck at the Apple logo. There is no spinning wheel and nothing else happens. Pressing 'C' for booting from CD or pressing ALT and choosing the CD as an alternative boot source does not work either: it just does exactly the same, gets stuck at the apple logo. I already tried resetting the PRAM and NVRAM, as well as the SMC. This also did not change anything. CMD+V mode starts up then stops at the line "ACPI: System State [S0 S3 S4 S5] (S3)"
What can I do? I really need to save my Mac, there is some really important stuff on there
For several weeks, my black MacBook (2008) has been acting odd. Certain applications won't open, and when I attempt to open them, the computer makes a quiet clicking noise, like the drive is failing. Last week, when trying to boot it, the thing just wouldn't. Stuck on the grey Apple logo screen. Assuming a hard drive problem or failure, I ran the tests. I ran Disk Utility from the Snow Leopard install disk, checked & repaired permissions, checked & repaired disk. All okay. I ran the Apple Hardware Test from the install disk that came with the computer, using the test that runs for an hour or so, and all appears to be fine. The computer won't boot into safe mode. I've tried flashing the PRAM. I doubt I could achieve much through target disk mode, as I've already run Disk Utility. What's left to do? Something doesn't add up here.
View 1 Replies View Relatedi'm trying to boot from the Snow Leopard install disc so I can format my drive and re-install, however... it just gets stuck on the white screen with the grey Apple logo, what's up with that?
View 5 Replies View RelatedI have Time Capsule and everything is backed up on there. My data is on a separate USB HD + Drobo, but for now I need my iMac to boot but it won't. It won't even get into the Desktop. all the guides online says double click the Install Icon this and that...I would if I can get into the Desktop !
It is just stuck on the Apple Logo screen with the spinny thing, that stops spinning!
My PowerBook G4 (Ti, 867MHz) just decided it didn't want to boot today...
The PowerBook has been asleep and not used for a few weeks. I woke it up last week for a few minutes to try and print out a document. It restarted just fine after installing the printer driver. Then it went back asleep until today.
I decided I had better shut it down as it has been sleeping a lot. It's shut down for about 5 minutes when I boot it back up to find it stuck at the Apple logo with the (spinning) spinner. What I tried to do to solve the problem:
1. Booted into Terminal mode (command-s) and typed exit so I could see the boot log. It appears to attempt to boot yet repeatedly prints:
> localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[92]: Login Window Application Started -- Threaded auth
> localhost loginwindow[92]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
[Code] ....
2. Booted into Terminal again, and mounted the volume. I was able to do ls to list the file contents - so I CAN get to my files. It's not a disk issue. Then I ran fsck -fy. It reported the disk as OK.
3. Rebooted and reset PRAM. No change
4. Reset NVRAM. No change.
5. Popped in the Leopard install disc and restarted. Booted into Leopard disc.
6. Tried to repair permissions from Leopard disc - it just hung and I had to cancel the process.
7. Verified disk from Leopard disc. Reported as OK.
8. Clicked the next button on the install screen. Tried to install. "You don't have enough space"... The skimpy 40GB HD is so packed with stuff that it can't install. And my external HD won't connect to it, it never shows up. Not like I can move off anything anyway as it won't boot...
I CANNOT format the HD. I have stuff on there I can't lose. Does the Terminal recognize and mount USB devices so I can copy from the Terminal? If not I guess I could delete some apps and Xcode and stuff, maybe the System folder...
I have an issue with a macbook pro and booting from DVD. When I try to boot from the DVD it starts reading and after a few minutes I hear the driver stops and only a gray screen with the apple logo in the screen. I have tried two snow leopard disk and the original disk that came with the macbook pro. I can boot into the operating system, repair permissions, verify disk and disk utility does not find any problem. I also tried with a usb dvd and the same symptom, after a minute it stops reading the dvd.
View 2 Replies View RelatedI have a white macbook which has a dead battery it only works plugged in. One night i left it downloading the updates and after that the machine kepts like 10 minutes on the apple logo and the she boot to the os. I reinstalled the os but still the same. I tried to replace the ram but now flases five times and does not start. I am assuming the new ram is bad. My question is replacing the ram and the hd will solve my issue. What are the specs of the ram and how much ram could be installed? It has to be on pairs? What is the meaning ofnthe flashing light?
Info:
iMac (21.5-inch Late 2009), Mac OS X (10.7.3)
Macbook Pro was purchased in mid-late 2009 and is running on OS X 10.6. Today is suddenly stopped responding and so I turned it off. When I turned it back on it opend to the grey screen with the Apple logo and the loading icon and that is where it stayed. I have been searching for the answer on different forums but have yet to find a solution. My hard drive is appearing in the Disk Utility but not in the box when I try to reinstall OS X.
Info:MacBookPro, Mac OS X (10.6)
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
My 13" macbook is stuck on the grey opening screen with the apple logo and progress circle.
Info:
MacBook
My MacBook Pro won't boot past the white startup screen with the Apple logo. After doing some trouble shooting my best guess is that the issue is either an issue with the logic board or the hard drive, but I am no expert so I may not be right. Here is what I have tried so far. I have done all these steps multiple times and the results have varied, but here are my most recent results:
1) First off, there are no peripherals connected so that is already ruled out as the cause.
2) When I try starting up in safe mode (holding shift while starting), the Apple logo, spinning wheel and progress bar appear. The progress bar fills about a third of the way then stops. I have left it for quite a long time and it still stays at a third of the way.
3) When running a safe boot (holding shift+command+v at startup) it gives me a " SATA WARNING: Enable auto-activate failed" message, and then eventually times out. Here is the full message:
4) Resetting the PRAM (holding option+command+p+r at startup) does the second chime but only results in the flashing folder icon with the question mark.
5) I tried booting up the computer in single user mode (holding command+s at startup) and running fsck -fy, it again gives me a "SATA WARNING: Enable auto-activate failed", then eventually times out. Here is the full message:
6) I tried booting in recovery mode (holding option while starting). When I do this I do not get the OSX utilities screen. Instead I get a white screen, sometimes my hard drive shows up on the screen, sometimes it does not.
If i boot in recovery mode with my osx install disc inserted the disc appears. If I select the hard drive we are just back to the apple logo and spinning wheel. If I select the install disc it goes to the apple logo/spinning wheel again, sometimes it allows me to start running the install, but then when it gets to the step where you select the hard drive to run the install on, no hard drives appear.
So that's where I'm at. I do not care about losing any data because luckily I backed up this machine right before this started happening.
I recently bought a new macbook pro which I had set up and was running just fine. I then switched my hard drive from my old macbook (2006 black) which was running snow leopard. The Macbook pro will not move past the apple logo screen while the macbook starts up and willingly installs snow leopard on the new hard drive. I switched them back hoping that the macbook pro would recognize its old hard drive but no luck. I have a feeling its the old software as i read some where that you should not install older software on your mac than what it came with.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
When i started it on i saw that even after two or three minutes it didnt started. i am still stuck at the apple logo on startup.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
'Ive had a MacBookPro for about a year and a half - with zero problems to report. But, yesterday, I decided to do a software update for OSX. While waiting on it, I relaized I was running late for an appointment, got impatient and did a forced shutdown (stupid move, I now know). Anyway, upon restarting it, I get the usual start-up chime, then the grey screen with the apple logo and the spinning wheel - and then it stays there. I tried putting the operating syten disc in and did a start-up - same results. Ditto for safe start. I also tried to reset the NVRAM, got the second chime, then back to the same. Is there anything you folks can suggest? Is there a way to override this and get back to normal? I hope I'm merely having hiccups related to the operating system. Or could this be a sign of the dreaded logic board failure that I fear?
Info:
MacBook Pro
My Macbook Pro is stuck at the loading screen with the apple logo and a spinning wheel!
I Have tried CMD and R. I have also tried the Option button...
Info:
MacBook Pro with Retina display
I am trying to install windows 7 on macbook air, through an external DVD drive, since USB didnt work for me. The DVD is detected and ounce I click start windows installation, the system boots and gets stuck at the gray boot screen with the apple logo. What is causing this? how can I solve this?
View 22 Replies View RelatedOk so i yesterday, i wanted to learn computer programming so i decided to download Xcode for mac (The latest one for snow leopard) Everything went fine and a little error pops up during the installation saying something about needing to reinstall soundflower(or something similar to soundflower) I ignored it and everything went fine, i could use Xcode without any errors. Today (after my dad and my sister used the iMac) the Mac went laggy with the rainbow spinning thing. I restarted my computer and now i am stuck on apple logo. I went to the verbose mode and this is what i've found.
[URL]
There was a line saying systemShutdown false between the errors and the errors is still continuing.
I also tried holding shift for the safemode but it just went into restart loop until i let go the shift button
Info:
iPhone 4, iOS 5
I'm in way over my head after promising to fix my father in laws power mac g5. When I press the power button everything seem normal. You hear the apple sound but after a short while the fans speed up the screen turns grey with a folder icon and a flashing question mark and then the apple logo appears. I have never been past this stage. I have paired the memory installed correctly and I have tried every memory combination possible. I have reset the Pmu and I have reset the pram. I also tried to remove the battery but that didn't help either. I also tried to boot from a system disc but nothing I hear the disc spinning but nothing happens.
View 18 Replies View RelatedI own a 17" iMac Core 2 Duo. It has been crashing more and more lately. Now when I turn it on, it sits at the apple logo. The spinner does not appear. I tried new sticks of ram, and same thing. I can boot off a windows or Linux cd with the c key, but they freeze halfway through bootup. I ran a hard disk check also.
I have a 2nd gen Mac Mini that when booting chimes and goto the Apple logo with the circle below it. I tried once, let it go for about 10minutes before holding in the power button and trying again. It's been at this point for about 30minutes.
View 11 Replies View RelatedMy daughter's 3 year old MacBook Pro will not boot up. The grey screen with Apple logo comes up and it looks and sounds like it is going to boot up but after 30 seconds it goes black and turns off.
Info:
MacBook Pro (15-inch Early 2011), iOS 5.0.1
My sisters 1GB iPod Nano is stuck on the Apple Logo Screen and will not shut off or reset by holding the buttons down. It doesn't mount or open iTunes when plugged into a computer.
View 3 Replies View RelatedMy mid 2010 iMac i7 will not boot past the apple logo? I'm running 10.7.3. I have tried restoring from TM backup from recovery mode (worked the last time this happened) however upon completion it returns to the recovery screen? I made a disk of Lion when I downloaded the first time (followed same instructions sourced from numerous websites) which does not seem to work when i set to start up from this disk, just gets to the grey screen and flicks between the apple logo, a folder icon with a question mark and the circle with line through? Now I can't eject the disk either, a message appears that system can't eject and to make sure all applications are closed? Not sure how to go about closing these applications without being able to start the system? When I tried booting from the Macintosh HD I got a message that the boot cache partition was faulty? I have ran disk permissions etc all ok.
Info:
iMac, Mac OS X (10.7.3)
I noticed that when I restarted my MacBook today, the Apple logo takes a while (20-30 seconds) to just show up before the spinning gear shows up.
Things I've tried
1. Repair disk permissions
2. Verify disk
3. Reset PRAM
4. Boot into Safe Mode
5. Make sure Mac OS X 10.6.5 is the startup disk
My mother's unibody white MacBook will not get past the grey apple and spinning gear when you first boot up the computer. This was after she opened a link in an email from a friend who had her email compromised. Now I'm getting spam emails with the same link from my mother's hacked email, and her computer won't even get to the login screen. I took it to the genius bar only to be told it was likely HD failure, but the windows partition works without a hitch! What could this be? A trojan? Is there any way to retrieve data (really just pictures) before I attempt to reinstall OS X?
Info:
MacBook, Mac OS X (10.6.8)
iMac Intel G5 stuck at apple logo.
Info:
iMac, Mac OS X (10.6.8)
Macbook: A1181 Core 2 Duo 2.0ghz 1GB RAM
DVD disk: Leopard 10.5 Retail install
Hard drive: dead (spins with clicks).
With regular startup I get the flashing question mark and can hear the failed hard drive click and spin. After getting the DVD to boot in the drive (it doesn't suck it in right away), I get an apple logo and pinwheel like I should, but after about 30 seconds it goes to a black (blank) screen and the DVD spins down, but not all the way. The computer is still on, but nothing happens.
Oddities:
<>If I start it with an iMac 10.4 DVD I can boot to the install screen just fine, but can't install because it's an iMac DVD. I can erase and partition the drive fine (not the dead one, another one I have).
<>Safe mode boot does the same thing, but takes 20 times as long to boot
<>Retail OSX 10.4 DVD does not boot at all, but that one might be for PowerPC computers. I get the flashing question mark folder.
