Upon start up my screen goes to normal gray w/apple logo and spinner then goes black. Cursor is visible and still is moveable but nothing else. I safe booted and bar came up also but then back to black screen.Â
Info:
iMac, Mavericks upgrade
My 24 inch iMac is not getting pass the apple logo. It acts like it's loading, but then the little progress spinner (not sure of the name) stops spinning after 2-3 minutes. It never wants to get pass that. I'm running the latest version of Lion.
Here's the specs:
3.06GHZ
4GB
500GB
NVIDIA GeForce 8800 GS
So far I've tried using disc utility on my snow leopard disc....it doesn't load. I've tried to start in safe mode...it loads about half way and stops. Oddly enough windows xp works in bootcamp. It runs okay besides when I try to move windows. I'm guessing it's the graphics card. No idea really. Here is a video I made to show you what I mean: [URL]. I've also tried installing a new 1TB HD and it still won't boot from a disc for some reason. I tried install snow leopard through the internal superdrive and with an external superdrive. No dice.
Info:
iMac, Mac OS X (10.1.x)
I was trying to install Windows XP Pro, but for some reason the it wasn't showing another HDD to install Windows on. So I quit the install, and restarted my computer. Now all that happens is the normal grey screen appears (with no Apple logo), then it goes to a black screen and has the blinking cursor (Kinda like DOS).
View 14 Replies View RelatedIT does this every time, but when I do command and r or other such keyboard commands, it goes I the recovery pahe with no problem. Whenever I tried erasing the iMac to reset it, it said the disk was locked.
Info:
iMac, OS X Mountain Lion (10.8.5), April 2008 model
Unfortunately I bumped the switch on the power strip that my Mac Mini (1.42ghz G4, OS X 10.3) is plugged into while it was running. Now it won't boot up. All I get is the gray screen with the gray apple logo and the spinning wheel but no OSX.
View 14 Replies View RelatedSo, today I tried to install windows through boot camp assistant on my mac. When it got to partitioning my drive I got an error that my hard drive needed repairing. So I opened up disk utility and clicked verify disk (I can't click repair) and got this error Disk Utility stopped verifying �Chris Hard Drive� because the following error was encountered: Filesystem verify or repair failed. I then researched this and learned to fix the problem I must boot from my leopard install disk and use the DU from their. Unfortunately I don't have access to the disk. But I have the install disk from my old macbook (the white one) so I used this. I put in the disk and shut down. When I turn it on I hold C but all I get is a grey screen but with out the apple logo. When I try turning it out holding alt I don't get the option of the CD just Chris Hard Drive. But when I boot up holding D i do get to the hardware test screen but I get the error that's something like "Hardware test does not support this hardware". Will the Leopard install of a different type of macbook not work on my new macbook pro (13" aluminium)?
View 1 Replies View RelatedMac mini with 10.7 boots to grey screen with apple logo? Any way to overcome this?
Info:
Mac mini, Mac OS X (10.7.3), new machine
My 13" macbook is stuck on the grey opening screen with the apple logo and progress circle.
Info:
MacBook
macbook pro hung up on gray screen/spinner after reboot.
Info:
MacBook Pro
macbook pro frozen on gray screen with spinner.
Info:
MacBook Pro
Pretty smooth sailing until I had to reboot my mac pro. It just stops at the point where you have the grey Apple logo and the spinner.
I'm noticing some weird behavior in my Mac Pro first gen.
Basically, when I start it up, the displays just stays black for some time, until the Desktop loads up and the computer is functional, but never displays the gray screen with the Apple logo. This just happened all of a sudden and stayed like this.
I know is not a big deal now, but I'd like to sell it in the near future and this could be problematic for that.
I Have a MacBook pro 17" 2009 with OS 10.7 Lion, I was doing the updates in the middle of the updates give a error and say you need to restart, Now, when I restarted it is showing gray screen with apple logo and spinning gear and is not moving beyond that (even after 3 hours).I tried Resetting my mac PRAM and NVRAM, nothing, I tried Safe Mode, I tried verbose mode(command V) and is show me this,The system bootstrapper has crached: Trace/BPT trap: 5. I don't have originals cd I lose them when I move.and Lion I'm download from app store I don't Have DVDÂ I don't care about information on my mac, I backup everything daily. I just want to make it work again.
Info:
MacBook Pro, Mac OS X (10.7.3), 17" 2009
when i start up my macbook it goes the the gray screen with apple logo then the logo turns in to a circle with a line in it
Info:
MacBook
This morning, I would turn it on and it'd go to the grey screen with the Apple logo for a few seconds and then go to the icon that is a circle with a line through it. After reading online, I was able to boot it up in Safe Mode. I went to Startup Disk in Preferences. I chose the MAC OS X, xxxx and then clicked the lock to prevent further changes and then clicked restart. Now when I turn on the macbook, it goes to the grey screen with the Apple logo for at least two-three minutes and then just shuts off. Won't boot into Safe Mode now. I already tried the Command-Option-P-R keys trick like five times.
Info:
MacBook Pro
During boot Yosemite shows a grey screen with the Apple logo and a progress bar - is this normal?
Info:
iPad 2, iOS 7.0.3, 64 Ghz. 3G
I am trying to install windows 7 on macbook air, through an external DVD drive, since USB didnt work for me. The DVD is detected and ounce I click start windows installation, the system boots and gets stuck at the gray boot screen with the apple logo. What is causing this? how can I solve this?
View 22 Replies View RelatedFor several weeks, my black MacBook (2008) has been acting odd. Certain applications won't open, and when I attempt to open them, the computer makes a quiet clicking noise, like the drive is failing. Last week, when trying to boot it, the thing just wouldn't. Stuck on the grey Apple logo screen. Assuming a hard drive problem or failure, I ran the tests. I ran Disk Utility from the Snow Leopard install disk, checked & repaired permissions, checked & repaired disk. All okay. I ran the Apple Hardware Test from the install disk that came with the computer, using the test that runs for an hour or so, and all appears to be fine. The computer won't boot into safe mode. I've tried flashing the PRAM. I doubt I could achieve much through target disk mode, as I've already run Disk Utility. What's left to do? Something doesn't add up here.
View 1 Replies View RelatedMy computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. Sometimes it refuses to shut down. This issues started after installing OS lion. What do I do?
Info:
MacBook Air, Mac OS X (10.7.3)
My Macbook Pro is not starting past the grey screen and the apple logo and the rolling circle. I have tried every method and I am desperate to do anything to start my computer even erase the entire disc. I have contacted the Apple store and they told me the cost will be equivalent to $600 to just repair it and no way I will be able to afford it. I am willing to do anything and even erase my entire disc. However, for that the instructions on the Apple page state that 'Insert your Mac OS X 10.4 or 10.5 installation disc'. However, I do not have my installation disc Is there any other way I can erase the OS system and at least reboot my Macbook?
Info:
MacBook Pro
I have a Rev A 12 inch Powerbook - 867 mHz, 640 RAM, 40 GB hard drive. The machine's always been reliable and has performed great over the years. I bought it the last week of July, 2003.
Yesterday, the Pbook was shut down, and I press the on button so it would boot up. Almost immediately, the hard drive makes a loud, whirring noise. The computer advances to the gray screen with the Apple logo, but it doesn't get past that point and the noise continues, as if it's a car engine that just won't start...
I'm going to take it to my local Apple Store in the morning, and hopefully the data, including my nearly 22 GB of music, can be saved. Any thoughts on how to get my computer working again? By the way, it's the original hard drive installed. Hopefully this is enough info to generate some ideas, I'm stumped.
I am looking at purchasing an Ibook G4 but the description of the item includes this:"When you switch it on it begins to load up i.e. the blue screen with the Apple logo, but then the screen goes black or flickers. Said friend has kindly wiped the hard drive for me so now when you switch it on it makes the �opening� noise then you get a blue screen with alternating �?� and the Finder logo."
I have a feeling this may have been a temporary fault with the screen connector being loose and possibly damaged.But i assume the alternating "?" and the "finder logo" is simply a lack of OS?
Today i discover that when my macbook pro screen is black and i place light behind the screen, i can see through apple logo. Is it normal ?
Info:
MacBook Pro, OS X Mavericks (10.9.4), Iphone 5s
Why is my Snow Leopard OSX 10.6.8 IMac screen all white when I turn it on? There is no spiral and no Apple logo and the desktop does not appear. The screen is just white. Â
Prior to this, we had a wind storm in our area with some power glitches today. After one of them, the dock items disappeared and just the wallpaper was there. The colored spinner began going around when I clicked on the mouse but nothing was happening.  I unplugged it to try to reset it, but now the screen comes up all white, there's no apple logo that appears at start up and that's it. Now what should I do?
Info:
iMac, Mac OS X (10.6.8)
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked. However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop? Any way to fix it? Thanks.
View 3 Replies View RelatedMacbook: A1181 Core 2 Duo 2.0ghz 1GB RAM
DVD disk: Leopard 10.5 Retail install
Hard drive: dead (spins with clicks).
With regular startup I get the flashing question mark and can hear the failed hard drive click and spin. After getting the DVD to boot in the drive (it doesn't suck it in right away), I get an apple logo and pinwheel like I should, but after about 30 seconds it goes to a black (blank) screen and the DVD spins down, but not all the way. The computer is still on, but nothing happens.
Oddities:
<>If I start it with an iMac 10.4 DVD I can boot to the install screen just fine, but can't install because it's an iMac DVD. I can erase and partition the drive fine (not the dead one, another one I have).
<>Safe mode boot does the same thing, but takes 20 times as long to boot
<>Retail OSX 10.4 DVD does not boot at all, but that one might be for PowerPC computers. I get the flashing question mark folder.
I'm selling my old iMac and while cleaning the hard drive it froze. I forced shut down and when I turned it back on a circle with a diagonal came up initially, followed by flashes of that, a question mark and the apple symbol. Now it won't get past the grey screen and the flashing symbols. Â
Info:
iMac, Mac OS X (10.4.11)
Screen will go completely black for a second then back to normal display.Makes no difference what application I'm using. Within last 10 minutes went black for 4 times. Does not power down, just screen goes black.Contacted support via phone, they had me shut down, unplug power cord, then plug in and start. Appeared ok while I was on phone with support.Didn't use imac for 1 1/2 hours, now I notice it going black again.
Info:
iMac, Mac OS X (10.6.8)
Do any of you have a sensor-type looking thing on your iMac's? It's on the black strip around the edges just above the black Apple Logo.See my picture for what it looks like (you'll have to look closely to see it):I'm interested to see your responses of what it could be/is. I've only had the machine for going on for 3 days now so I'm new to the whole iMac thing.
View 4 Replies View RelatedI have Time Capsule and everything is backed up on there. My data is on a separate USB HD + Drobo, but for now I need my iMac to boot but it won't. It won't even get into the Desktop. all the guides online says double click the Install Icon this and that...I would if I can get into the Desktop !
It is just stuck on the Apple Logo screen with the spinny thing, that stops spinning!
