During winter months up north, things get cold and dry quickly. As a result, static electricity discharge becomes more frequent. I've always had a minor issue with my various Macbook Pro's over the years. But with my new MBA and the sudden drop in temps here in Chicago, my MBA is off the charts. I have started my winter routine of touching something else to discharge first before touching my MBA. Otherwise, I'll arc a spark every single time.
im thinking about getting a macbook air , and i did some research about the SSD disks ,the main thing that is making me get a macbook air , besides weight and size factor. -Faster start-up as no spin-up is required.- Typically fast random access for reading - as there is no read/write head to move. - NO NOISE - Ability to endure extreme shock, high altitude, vibration and extremes of temperature - again , because there are no moving parts.
[uRL] Only 40GB and 80GB though but it's great to see that m-SATA is being adopted by such big company. Maybe m-SATA is the future? No need to waste space with casings and stuff when a stick like that does the job too. Those should fit in MBA but there is no place for the screws.
Twice this week I?ve been shocked by Static electricity as I touch my MacBook Pro. It?s cold so I get shocked a lot lately. Is the MacBook Pros internal circuits safe from static shock? Is the outer shell protecting the CPU?
So I'm at a client tooling around with my late 2008 Aluminum MacBook. Carpet. Cold, dry weather. Are you getting scared yet? Go to pick it up off a table and zt! Shocked the hell outa myself and apparently my MacBook. I grabbed it on the right hand side and the static charge must have discharged through the slot loading cd rom drive. Now it won't charge. Battery and Mag Safe brick tested fine at the Apple store. They're going to swap out the Mag Safe port for $110 first and then the flat rate repair for around $380 if needed. Note to all Aluminum MacBook/Pro owners. Ground yourself, or plug in the grounded PSU brick.
When the Macbook Pro is charging, I can feel a little electricity in my fingertips. Unfotunately, I don't have a three prong outlet, just two. Either way, I think this was not supposed to be.
Info: MacBook Pro, Mac OS X (10.7.4), Aluminum Unibody 2009
Audio Decoding on the 2009 Mac Pro causes the CPU temps to hit near 100% load temperatures and voltage requirements... Yielding a 30(c) rise in temps and a 50w additional power just for the task of Audio playback. Is this an OS X issue or hardware? This issue appears to invalidate major marketing points of the platform.
Its frustrating seeing a MP3 file played in Quicktime, bring the CPU voltage and temps so high.... This Can't be good... Ripping a DVD and listening to music pushes the Core i7 CPU to near 80(c) temps!! Basically bug turns the Mac Pro into a Heat Miser..
In this POST, VIRTUALRAIN took the time to document the severity of the long debated issue with detailed charts and data.
This issue has garnered the time and attention of many MR users and everyone attention to get to the bottom of this apparently
I took the plunge and got a MBP 13 (5,5) in October. Its all going well except for the same problem that recurs.
The problem is that when plugged in via magsafe i recieve a mild tingling throughout the shell. This first happened a week after I got it but I solved it by using the long lead instead of the smaller plug. But now even the longer lead which is supposed to remove the issue still gives me the same vibration/electric shock feeling. Its NOT minor, I feel it when its plugged in and it hurts! I get a headache when it does this.
My mouse wire (or cable, or whatever..) is kind of messed up with the wire showing on the connection to the mouse and basically in the middle of the wire towards the USB connection to the CPU. It's the Apple mouse.. will I get an electric shock if I touch it while it's on? It's kind of sounds funny that I'd touch it but you know ..
I have electrical tape I don't know if that's necessary.
I don't know if this is something to be worried about but I notice that when the tip of the display port cord ( from the ACD ) touches the metal frame of my MacBook Pro there is a tiny blue arch of electricity visible. Well, I just bumped that cord into the frame of the MBP and as soon as that happened the computer completely shut off, it just went to a black screen and turned back on when I connected it via AC outlet. When the computer started back up the clock was messed up ( 2008 date ) and it had forgotten all of my WIFI passwords.
I was trying to download bioshock the game from the app store and it gets about 75% through and then gets an error message "mzm.nvyhpxhw.pkg could not be extracted". I have tried many times and the same thing keeps on happening, what should I do?
I have upgraded from a OX 2.8 to 3.9. I now have to use two browsers to use the internet. Safari to have access to my yahoo mail account, and fire fox 2.020 to load information on my business website.
I have not been able to use shockwave flash or flash player on the up load. When I was using OSX 2.8 I could add pictures to my business website and etc., I had no problem viewing the slide show I had on my website, other than the system was a little slow. I have an ibook G3 128 +512 ram, total. 900 mhz, 12. inches and white case. The systems requirements indicate that I need to upgrade to tiger OSX 4.0
I know there are some issues using Fire Fox with OSX 3.9. When ever I tried to access my yahoo mail from Fire fox, the system would crash.
Other than getting a new laptop, any suggestions? I tried to down load Shock wave from the old apps web site called Camino. I get an error message that the plug in cannot be loaded sussfully I have tried load flash Player 7.09, but get a message that it can not load. Could this be because of not enough space on the drive. Maybe I am not loading it correctly. Shouldn't I be able to click it to install it in the right place without having to try the different files.
Well the time has come to change the Hard Drive in my late 2009 MAcbook. Seems that 250GB got filled up much faster then I expected and I'm left with only 40 GB or so. With that I'd like to swap out to old drive for either a 320 or 500 GB one. but I"m not sure exactly which drive to buy and what exactly will fit. The advice from the members of this forum has been invaluable to me in the past so here I am again. What would you all recommend?
have any macbook air owners here found that 2GB ram is inadequate for their needs?I'm thinking it should be fine for me now, but i'm just worried say 2 years down the road if the 2GB ram will be enough, since ram is not upgradeable on the MBA.
i know the MBA is the machine I want, but i'm afraid of spending 2500 on a notebook which isn't very futureproof.
I got my macbook yesterday and i was wondering if SL os is already installed on the macs if you got it after the SL os got released ? It came with a sl os disc to install so im installing it right now . But what if my mac already came with it and im installing again ? i need to know now so i can stop it from installing .
I am thinking about buying a SSD to install in my late 2008 aluminum macbook. Specs are 6GB of ram, 2.4 GHZ processor, and the standard 250GB hard drive which I believe is 5400 RPMs. So my question is, is it worth it? Will I see that much of a performance improvement? I don't reboot that often. I currently am using 92GB of my 250GB hard drive. So I would probably only need like a 160GB or 200GB SSD. Also if I do get one which one would be a good one to get. What should I look for in features.
I've had my 2010 Macbook since it launched and this thing just attracts grime and scratches. I literally left my Macbook on my desk for a day and all of a sudden it has two jagged scratches near the apple just by sitting on desk!
Now after that happened, I bought a Caselogic sleeve to protect it when not in use but now I have a green stain near the power indicator on the side of the palm rest. I tried cleaning it off with soap and water, it didn't work.
Then I googled it and I heard toothpaste might take out stains, so I tried that and it came off now but then it returned a couple of days later when I wasn't using the sleeve, so I figured it's not the problem. Cleaned it again with toothpaste and now there's a just a faint green stain I just can't get rid of.
I've been using a PC all my life. I currently have a 5 year old Dell 3100 desktop. I've decided to make the switch to a Mac. I have a lot of problems with my current computer, but it's 5 years old so it's expected I guess.
I'm pretty much decided on the Macbook Pro 13 inch model. I'm not a "hardcore professional" computer user, but more of a personal user. Here are some of my concerns:
1. I'm leaning towards the 2.4 Ghz model. The upgrade to a 2.66Ghz with an extra 50 Gb hard-drive is several hundred $$$ more expensive. Do you guys think the added $$ is worth the little extra processor speed and hard-drive size for a non-professional user?
2. Some people are telling me to wait for the 2011 Macbook Pro to be released. Obviously nobody knows exactly when that will be. I can wait a few months, but I'm not sure how much would change. Some people seem to think the processor on the 13' model is "outdated" and needs an i5 or i7. 2011 is just around the corner, so perhaps it might be worth "waiting" to see what upgrades come available.
I have a 2.4GHz MBP, 4GB RAM, 320M, 500GB HDD. This is my main to-go machine, as well as my clamshell with my ACD. I am planning on ordering 2 updates for the machine (Already ordered the first one, actually)
1. 500GB 7200.4 RPM Seagate w/16MB Cache.
2. 8GB OWC RAM upgrade.
I hear both of these are ridiculously easy upgrades to do, and this also allows me to upgrade my PS3 slim's HDD to 500GB!
Do you guys think this is a worthwhile upgrade for someone who writes code in XCode?
Also, does anyone know how to back up my iWeb site so I don't have to remake it when I format?
So I finally made a choice and have decided I'll go ahead and get the 13' MBP to tide me over till I get my iMac and then use it as my portable.
I've been looking into some upgrades I could do though, looking to stay below 200$. I'm fairly sure I could do all of these fairly easily, especially with all the how to guides online, but are there any caveats that perhaps you more seasoned Mac upgradees would know?
[URL]
I'm thinking about putting this HDD from OWC into it in order to upgrade to 7200 rpm and also triple the storage capacity. (For less than Apple's 500gb 5400 rpm HDD) I would keep the other HDD to switch back into the MBP incase I ever need to send it to Apple -- will there be any problems with this configuration?
And then I'll probably upgrade the RAM to 6gb. But there shouldn't be any problems with that, unless having a 2gb and 4gb stick together will create problems.
I may get a very small SSD to boot from somewhere down the line...But I'll probably cross that road whenever I decide to sell this model and buy a new MBP. I don't want to spend too much on an outgoing processor.
Ive been reading a few different posts on the forum with regards to this, but thought I would ask the question anyway.
Just got my first MAC, Got the 13". Decided I didnt want to wait anymore, If the new ones are that good then I might sell the 13" in 12 months and get one of the new 15"s.
What kind of backpacks do you guys use for your MBP? I have a 2.4 17', and I really would like a backpack. I looked at [URL], and they're packs are pretty sweet; although, they are a bit expensive. Does anyone have one and would like to give me some reviews on it?
Now that I have my air I'm looking around for storage. I thought it would be nifty if there was a wireless NAS solutions that I could just carry around in my laptop pack and have the Air find it automatically with out the need for using the USB port. It doesn't look like there are any that are battery powered (yet), and some of them are far to clunky to be a portable option. Anyone have any experience or suggestions?
Would work well on my Macbook Pro. I have a 2.2 Ghz Macbook Pro with the 128 MB VRAM. I know that it says that it needs 256 MB but will it work at all? I would have to run it in Parallels. I doubt it will work though. So does anyone have any alternatives?
I'm wondering if the Rev. A MacBook Air's have the new features using the multitouch trackpads (like four-finger expose and all that)? I remember reading somewhere that the rev. A MBA's have the same technology driving their trackpads as the new MB's/MBP's.
