My MacBook is about a year old. It has never had a problem with power or battery issues before, but now if it is not plugged in, it will work for a little bit and then randomly shut down (even with a full charge).
I recently bought a new Mac mini and Seagate goflex 3TB external hard drive. The computer is awesome but if I have the external hard drive plugged in, it messes with the restart/shutdown. The mac will act like it's powering down and go to the blank white screen but will never turn off and shows the little gray lines that go in that circular motion at the bottom of the screen. If I disconnect the USB from the Mac then it completes its power down. I've tried the suggestions of repairing disks or disk permissions, as well as resetting the PRAM, which have worked sometimes but the the problem reoccurs. I've also tried ejecting the external hard drive before shutting down on the Mac but I'll either get an error message or nothing happens and then the above shutdown issue occurs.
Why does this happen and what can I do so that I can always have the external plugged in and not have to manually unplug it so the Mac can shutdown?
I use my MBP 15" (the new one), as my primary machine in my office. I sit by my best usually 10-12hrs a day working on it.
I am trying to figure out what is best to do, keep the AC plugged in or have it un-plugged and only plug it in when the battery is drained (or less then 50%)? I have tried different experiments, plugged in, not-plugged and time is about the same for life of the battery. The true question is, how is is best to do it for the health of the battery.
My iMac 27 late 2010 does not shut down when shut down in the normal way. I have to shut down with the push button. I have tried disconnecting all the usb connected hardware still no use. Can any body help.I have OS Lion 10.7.3?
My white MacBook is not charging when plugged in. And if I take out the cord, the computer dies. I noticed this right after I had made a flight on an airplane so I'm assuming something happened while on the flight, even though I had my computer with me the whole time, and inside the case. I tried using compressed air to try and blow out any debris that might have got into the little charger port, but no luck.
I have had my MacBook Pro since May 2007. It has been working fine up until a few months ago. I will have nearly full, or fully battery and the computer will turn off, and will not turn back on unless I plug the charger in. If the charger is unplugged for 5 minutes, the computer completely shuts down. So basically I cannot use the computer unless it is plugged in. It is starting to become a pain because sometimes I need it when I am in a place without an outlet.
Just wondering, whenever I use my macbook unibody at home, I have it plugged in most of the time. When I take it to school, I don't bring my plug. When I go to sleep, I generally unplug it and put the macbook to sleep. Should I keep it plugged in even though I closed the lid whilst I sleep during the night? Or should I keep unplugged it every night when I close the lid?Also, I do calibrate my battery once a month. its at 93% after 43 cycles.
My 2.4ghz i5 MBP runs a lot better when using discrete graphics. Minimizing and maximizing windows, scrolling, opening folders etc... all run smoother with the 330M. Is there a way to always run the 330M when plugged in, and switch to automatic graphics switching when unplugged? This would be the perfect solution for me.
I recently upgraded my last-gen macbook to a macbook pro 13". I have a feeling there's something wrong with the battery however. On my old Macbook, whenever i let the battery drain completely (After I got the 10 minute warning message), the macbook went into hibernation until I plugged it in. However, on my Macbook pro, whenever I do the same it doesn't go into hibernation. Is there something wrong with my battery or have apple changed how this works?
My macbook is plugged into the charger, and the green light on the charger is on, but my computer says "not charging" in the top right. i've checked the charger with another computer, and it works, as well as turn off my computer, and turning it back on.
Macbook Pro always thinks that it is plugged in, even when it is not. When actually plugged in it says charging, and when I unplug it then it shows the plug symbol and says Power Source: Power Adapter.
I tired reseting the PRAM, and doing the thing where you turn it off, unplug for 10 seconds, plug in for 5 seconds then power on, not sure what else I can do, and if it is an internal issue with the Magsafe if it is covered by AppleCare.
I have an older Powerbook Apple MacBook Pro Core Duo 2.16GHz 15" (2006) - A1150 that has been working fine but all of a sudden today developed a problem where it will not start with the adapter plugged in, but will start fine on battery alone. However, once started, if the adapter is plugged in it immediately powers down. I suspected the adapter and tried a known good one and it has the same issue.
I have a late 2010 macbook air 11 inch. The battery condition is normal and about has 650 cycles. The light on my charger is green and my computer only stays on when the charger is plugged in. When I unplug it the computer just turns off and my battery says its not charging and that the power source is the adapter. Do I need a new one or is this fixable?
Info: MacBook Air, OS X Mavericks (10.9.3), late 2010 model
I just bought the new MBP 13" 'cause I'm gonna need it for college, but since I'll also use it as "personal computer", for web browsing, playing music and movies, I'll probably have to charge every day. My question is: if I got home and my MBP is dead, I plug it in and use it, when the battery is fully charged, I have to unplug it or I can use it for the night (still plugged in) and just unplug it the next day for school?
Is it somehow harmful to my battery life? And by the way, I've read that "discharge the battery" means just use at least until the 50%, is that right? So if I charge it just when it's about 40%, I just need to recalibrate once a month, and that's all fine, right?
My wife and I always leave our MBP plugged up when we are near a charger. This morning the MBP had been plugged up all night, but the battery was dead. I noticed the light was out on the charger so I went to take it out, but when I touched it it turned red indicating that it was now charging. It turns out it is very finicky and randomly stops charging. Anybody else had problems with their charger? It will be Thursday before I have a chance to get to the Apple store.
I have been using my 13" MBP with a monitor for the past few months now and I just noticed that sometimes I look up at the battery status and it is plugged in and it says in parentheses not charging. I press the button on the side of the MBP and it indicates it is at about 80%. I left the MBP at home all day plugged in and I was wondering if it is doing its own battery maintenance or what.
In the last few months I have been having trouble charging my Macbook (Early 2008). My computer is about 2 and a half years old. When I plug in my Macbook with the MagSafe power adapter, the little light that is supposed to show up green or red usually does not show up at all. Sometimes the light shows up green when it is not fully charged. Also, when my Macbook is plugged in, it does not usually start charging, though the charge on the battery will stay static. For example, I have been using my Macbook for the last 3 hours. Even though it's plugged in, the charge on the battery is still at 38%. I have tried shutting down my computer, popping out the battery, and then putting the battery back in. This allowed me to start charging my computer one time, but it obviously did not fix the problem. One time I held my Macbook and shook it up and down a couple of times, and when I plugged it in again, it started charging. Here is my hardware information:
Hardware Overview: Model Name:MacBook Model Identifier:MacBook4,1 Processor Name:Intel Core 2 Duo Processor Speed:2.4 GHz Number Of Processors:1 Total Number Of Cores:2 L2 Cache:3 MB Memory:2 GB Bus Speed:800 MHz Boot ROM Version:MB41.00C1.B00 SMC Version (system):1.31f0 Serial Number (system):W8823SXA0P1 Hardware UUID:9925BAB9-883A-5871-ADB9-71AD1063C304 Sudden Motion Sensor: State:Enabled
and here is the Power information: Battery Information: Model Information: Serial Number:DP-ASMB016-38ba-2f09 Manufacturer:DP Device name:ASMB016 Pack Lot Code:0002 PCB Lot Code:0000 Firmware Version:0110 Hardware Revision:0500 Cell Revision:0200 Charge Information: Charge remaining (mAh):1833 Fully charged:No Charging:No Full charge capacity (mAh):4791
Health Information: Cycle count:58 Condition:Good Battery Installed:Yes Amperage (mA):0 Voltage (mV):11555 System Power Settings:
AC Power: System Sleep Timer (Minutes):15 Disk Sleep Timer (Minutes):10 Display Sleep Timer (Minutes):5 Automatic Restart On Power Loss:No Wake On AC Change:No Wake On Clamshell Open:Yes Wake On LAN:Yes Display Sleep Uses Dim:Yes
Battery Power: System Sleep Timer (Minutes):5 Disk Sleep Timer (Minutes):10 Display Sleep Timer (Minutes):1 Wake On AC Change:No Wake On Clamshell Open:Yes Display Sleep Uses Dim:Yes Reduce Brightness:Yes
Hardware Configuration: UPS Installed:No AC Charger Information: Connected:Yes Charging:No
I have this gorgeous 22" ACD that I have plugged into my G5, where I use it quite often. But my intention for the G5 was to be a server, which it is. I often need some extra display space when I'm doing school work, or coding, so I was wondering if there is a way that I can use the display, while plugged in to the G5, as an external display for my MBP. Preferably something that I could stream over my local network.
I was just wondering if anyone else noticed this. I notice this everytime I minimize a window. When my MBP is plugged to the wall, and I minimize a window, the animation is very smooth, but when it is unplugged, just using the battery power, it is still smooth, but not as smooth.
When you unplug power from your MBP, the battery icon is supposed to show the battery level. Right now, mine shows the plug icon and if I click it it says power source is the power adapter. It's sitting in my lap not plugged in.
is it okay to leave my charger plugged into the wall socket on all the time? Even when im not charging my MPB? I have this strange fear that the charger will die on me faster if i leave it plugged in all the time.
Here's my puzzler of the moment: I have a Creative USB headset (the Fatal1ty gaming headset for Mac, which I bought at an Apple store). It's been working fine via USB (with the notable exception that it stops working easily if even slightly jostled).
In the last few days, however, it stopped working when plugged directly into the Mac. The audio out still works, and it shows up as an audio input device, but when selected it does not detect any incoming audio.
I assumed it was a headset problem until I tested it plugged into a USB hub - plugged into the hub, it works fine.
I bought my MacBook Pro 13.3" 5 months ago (according to Coconut Battery) and the battery-loadcycle is already at 51 and 89% battery capacity. Anyway I wanted to know, if I keep my Mac plugged in on the charger will the battery-loadcycles decrease?
I bought my macbook exactly two weeks ago (tomorrow) and I'm already starting to have problems. My battery is currently at 10% when not plugged in but then when I plug it in it won't charge. What is wrong with it?