MacBook Pro :: Intel Hard Drive Not Recognized When Installing Leopard
Jul 15, 2010
I have a Macbook pro 17" 2008 model, and I just bought a new 160gb Intel X-25m solid state hard drive. I installed it into the mac with no problem, but when I boot up with the OS boot disc 1, the drive doesn't show up in the "destination" screen. No drives are there. When I open Disk Utility the drive is there, and shown as read/write, but when I boot with option held down the drive isn't there either. I can't even do any repairs on the drive in the disk utility.
View 4 Replies
ADVERTISEMENT
Jun 19, 2009
my white macbooks hard drive broke along with my cd drive. I purchased a new hard drive and put it in but now I have no way to install Leopard since my cd drive is broke.I do understand the best way would be to buy an external CD drive and use that but I would rather not waste all that money on one use.I do have a firewire cable and my friend has a white macbook. I've heard that you can boot using another computer and use there cd drive via firewire by holding "T" or whatever.
View 4 Replies
View Related
Apr 11, 2012
I recently invested in a refurbished iMac which is running Mac OS X Lion 10.7.3 (11D2001).
I am trying to access my existing external hard drive through the machine and although this lights up when plugged in, it doesn't appear in the finder. Other Memory sticks work without problem.
It is a Western Digital Elements 160GB Portable Hard Drive that has worked and continues to do so without problem on my ancient iBook G4.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
View 1 Replies
View Related
Dec 26, 2007
I think I'm going to format my hard drive to delete everything from it and start fresh with leopard. I already have leopard installed, but I think I should just format my hard drive (after backing up what I truly need like my music and other files) and then just install leopard.
Question, I have read that I go to disk utility to do this (format and install leopard), is this correct? If so, what else do I need to know before I do this?
View 12 Replies
View Related
Oct 7, 2009
i was wondering if it is possible to install snow leopard without a superdrive or the remote disc utility, but from an external hard disk drive which the snow leopard files have been put on.i have already googled to the end of the world. no success so far.
View 12 Replies
View Related
Oct 31, 2007
I'm getting a new hard drive in my iBook G4 tomorrow, as well as more memory, and was wondering if there is anything special I will need to do to install Leopard on this HD that has nothing on it.
View 24 Replies
View Related
Jan 19, 2010
I have the disk image for Leopard on my external hard drive. I put it on there from my Powerbook. I tried to reinstall Leopard onto a Macbook but it wouldn't let me because I had to do a GUID partition on the external hard drive. I did that, put the DMG back onto the external drive and went to install it. I went to Startup Disk under System Prefences but my hard drive isn't showing up.
View 4 Replies
View Related
Aug 26, 2009
When installing Snow Leopard, will it erase my hard drive and force me to start all over or will it just update the software and keep everything the way it is on my Mac now?
View 6 Replies
View Related
Aug 31, 2009
Is it possible to install Snow Leopard from a disc image on an external drive?
View 7 Replies
View Related
Sep 17, 2009
I am installing a bigger hard drive for my Macbook pro, when I bought leopard I only paid for it to licensed on 1 comp. How can I keep leopard if I install the new hard drive?
View 1 Replies
View Related
Jan 24, 2010
I am having problems with my I-Mac. It is the 2.8GHZ 24" model and when I try to start it up I get a white screen with a blinking grey file folder with a "?" mark in it??
I had this problem before. Erased the hard drive and then reinstalled everything. I made it through it but I think I may have done it wrong. Anyways the computer worked good till the other day. I upgraded to Snow Leopard and now it is doing it again.
Do I need to start with the install disk 1 that came with the computer and install disk 2, then install snow leopard? Or can is there a faster route of doing this?
View 5 Replies
View Related
Aug 12, 2009
I'm about at my wits end. I would say I have a harddisk failure, but it passes every diagnostic I can throw at the thing. My problem is that I erased the main drive in my mac (been booting from an external hd) and I'm trying to install Leopard on this drive. The Leopard install starts, I'm able to choose the disk, and tell it to erase and install (or just install after erasing the disk externally). The installer starts, gets about 30-40 minutes in and then just plain stops because some package or other (seems to be different every time) is corrupt. My only option is to reboot and try again. I've done it three times now and am starting to feel rather stupid. Is there a known issue here that anyone can direct me at? I didn't see anything snarfing around the forums, but that doesn't mean I could've just plain missed it. I've just finished running tech tool pro 4 hardware tests (drive controller, etc.), surface scan, disk utilities erase and verify hoping it would tell me if there is a disk problem brewing. So far all the tests show green. I decided to try and hit the thing with something that writes to every imaginable space on the disk, so I ran erase free space from disk utilities. I plan on trying again after that finishes.
View 2 Replies
View Related
Sep 15, 2009
I have a white shell Fall 2007 (Santa Rosa) Macbook with a 120gb 7200 RPM hard drive. I bought a new 320gb hard drive and snow leopard today and want to ensure that I won't lose anything if I back my hard drive up as a "regular leopard" machine and then try and recall the files after installing the new drive as a "snow leopard" running system.
View 1 Replies
View Related
Jun 5, 2012
We have a MAC Pro Tower with 2 older printers connected to it via ethernet (through our AT&T 2-Wire DSL/Router). We have a Xerox Phaser 6300N & an old Apple LaserWriter 12/640 PS.We have been running Leopard for quite a while with this setup & no problems. When we finally were able to upgrade to Snow Leopard which I installed on Thursday, 5/31/12.Now, our printers are not recognized at all. I've reinstalled & redownloaded the Xerox drivers about 5 different times,tried unplugging the printer from the router & plugging it into the back of the computer directly. Our speakers also did not work either, which was just a quick fix in the sound setup in Systems Preferences.
I finally called Apple Tech Support -- they had me reset the PRAM, then I was booted up to a Senior Tech guy that upon learning that the printers were connected via ethernet that "Apple could not help me as they are only trained & able to troubleshoot USB connections".
Now, I know that I am not the only one out there that has older printers connected to their MAC, and since the trouble started as soon as I installed Snow Leopard, there must be a solution -- perhaps a setting that was reset to the default when we upgraded or if Snow Leopard is not compatible with ethernet will a ethernet/USB converter do the job? I have even found an article about how to create a driver for the LaserWriter to work with SnowLeopard ... but the printer has to be recognized first.
Info:
Mac Pro (Early 2008), Mac OS X (10.6.8)
View 4 Replies
View Related
Mar 8, 2012
I've been having several problems with my mid-2009 MacBook Pro; 2 minute beachballs and failure to startup. So I've purchased a new new WD Scorpio Black thinking it was a HD issue, but after replacing my old HD with the WD, Disk Utility wouldn't recognize the new drive. So I searched around and found out that Hard Drive Cable failure is an issue on this certain MacBook. So I ordered a new Hard Drive cable and just replaced that today, thinking that my new HD would be recognized. However after going into Disk Utility via the OS X Install DVD, my new Hard Drive was still not recognized.
Info:MacBookPro
View 3 Replies
View Related
May 27, 2012
Have a mid 2009 13" 2.26 dual core. Started getting flashing folder with question mark icon and found hard drive failed. Tried two different drives, WD Scorpio Black 750GB 3GB/s 7200rpm and Seagate 500GB 3GB/s 7200rpm. Neither is recognized by the computer. What next? And yes I have the updated firmware.
Info:
MacBook
Pro, Mac OS X (10.6.5)
View 5 Replies
View Related
May 29, 2012
I have just got an old 2004 G5 and thrown a brand new hard drive in it. When i tried to install leopard (which I'm told would be the best operating system to use) it comes up with a blank blue screen!
View 14 Replies
View Related
Sep 9, 2014
Macbook Pro 17" Early 2011
Notes. Failed HDD ASD Test. A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out.
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
View 5 Replies
View Related
Nov 1, 2008
I've got an external hard drive. It's a "My BooK" Western Digital 500 Gb that uses both USB and Firewire. I've used it many times successfully with my MacBook but today, my Macbook will not recognize it.
View 2 Replies
View Related
Jul 7, 2009
I have a first gen white macbook core duo. I am trying to install a new 320GB Seagate HDD in my laptop to replace the 60Gb drive. I installed it but I can't get the OS to recognize the Hard disk when it is installed in the computer. I have no problems when it is installed in an external case. I have booted off the Leopard disk but it does not show a drive available to format, I booted off the original drive in the external case and the disk utilities does not show another drive attached. If I put the 320GB drive in the external enclosure, disk utilities recognizes it right away. I have formatted it with GUID format but it doesn't work when installed directly in the macbook.
View 4 Replies
View Related
Apr 9, 2012
my new MacBook Pro not recognizing my hard drives. Yes, thats two hard drives I have that don't seem to work on this computer but both work on my older MacBook and many other computers.
Info:
MacBook, Mac OS X (10.5.8)
View 4 Replies
View Related
Jul 27, 2008
I have been searching the internet for 3 days and finally gave up, besides buying another hard drive. Ill try to keep this short. i got Macbook C2D / OSX 10.4 / 80GB HDD What happened: I wanted to free up space on my macbook, so I removed my bootcamp partition buy using the bootcamp installer to merge the osx and winxp partition back together. The installer froze for 30min and i decided to manually restart (holding power button). What a mistake i made, on reboot i only get the folder with the "?" icon. Symptoms: OSX installer does not see a drive. None of the bootable linux recovery disk Ive tried can see the drive. WinXP, Win98 recover disks do not see the drive. Terminal "diskutil list" shows=
/dev/disk1
0: untiled *467.0 kb disk1
/dev/disk2
0: untiled *219.0 kb disk2
/dev/disk3
0: untitled *95.0 kb disk3..........
View 4 Replies
View Related
Feb 6, 2012
I have recently bought a Seagate external drive. It works fine for Windows over WIFI. But for the Mac, it only works when directly connected and is not recognised over WIFI - the drive is not listed under devices. It did when I first started the drive yesterday, when I managed to copy all my files onto the external drive via WIFI. But not today. Perhaps related to the software update I ran last night?
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8), Seagate Expansion external drive
View 4 Replies
View Related
Feb 20, 2012
I have a new seagate 500gb hard-drive, it is recognized on Disk Utilities and not only that it also says the hard drive is 2tb.
Info:
MacBook Pro
View 3 Replies
View Related
Mar 21, 2012
I am trying to pull up my Western Digital External Hard drive after connecting it via USB. I used to be able to open it through Finder and there is nothing showing up.
Info:MacBook Air, Mac OS X (10.7.3)
View 1 Replies
View Related
Mar 21, 2012
I have:
- Freecom ToughDrive Pro USB hard drive
- New MBP running Lion 10.7.3
When I plug the disk in an USB port in the MBP, the light that indicates operation starts blinking but very lighltly colored and the disk is not recognized by the computer. I have put data on it using iMac Snow Leopard. I have plugged the disk into a MBP running Snow Leopard and it works. I have also tried another Lion (older MBP) and it also works.
How come the disk is not mounted or shown in Disk Utility. Can it be a power issue?
I have noticed there a lot of similar posts in the forum and none has been satisfactorily solved. Is this a mayor Lion bug? If yes, how can I downgrade to Snow Leopard?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 7 Replies
View Related
May 31, 2012
I just installed a new internal hard drive into my macbook as my old one was failing. Before doing this I backed up all of my information through Time Machine onto a Seagate FreeAgent external hard drive. I've been using this external hard drive for the past two years and I've never had any problems with my macbook mounting it. Once I had all of my personal information backed up I took out the external hard drive and then proceeded to take out my old internal hard drive and installed the new one. I installed the Mac operating system and the Macbook started up just fine but when it came time to reload all of my personal setting using Time Machine my macbook didn't recognize that there was an external drive plugged in. I know it isn't the external drive as it mounts just fine on other laptops. how I can get my macbook to mount the drive so that I can transfer all of my information onto this new internal drive?
Info:
MacBook, Mac OS X (10.5.8), Seagate FreeAgent
View 1 Replies
View Related
Jul 20, 2009
I've just got a new external HD, but it's not being recognised by Mac OS X (10.5.7). I assumed it was because it was in a Windows format, so booted Windows, but it then turned out it wasn't formatted at all. What is the easiest way to make this an HFS+ (the Mac OS extended format), and how do I do it as I can't see it anywhere on the Mac (including Disk Utility)?
View 6 Replies
View Related
Jun 23, 2014
i have Macbook Pro 2011 8GB RAM, 1 TB Hard drive OSX Mavrick. i recently ejected my back up drive but it was not a properly ejected now when i plug in the computer it doesnt come up as hard drive. it shows up in the disk utlity but it doesnt open its my backup drive and i dont want to loose m data
View 2 Replies
View Related
Aug 23, 2014
My G drive External Hard disk is not recognised by windows laptops yet it works on my MacBook Air
View 1 Replies
View Related
