I got a Mac Pro (2008) with a Rocketraid 2322.Now since 10.5.3 I got problems with booting the computer.Seems like Leo & Rocketraid don?t like each other very much.
I?ve sent several mails to HighPoint but never got an reply.Removed all usb & firewire stuff - didn?t help. Also did a PRAM reset.
I've been reading this site for a while now, first time I'm posting. I recently purchased 8 GB of RAM for my 2010 13" MBP. There are two 4 GB DDR3 PC3-10500 1333mhz sticks. When I install them in the laptop my computer does not get past the apple logo boot screen (the spinning disc freezes). However, I can boot into Windows (boot camp) without issues.
Also, when I pair either of the 4 GB sticks with one of my old 2 GB stock sticks the laptop boots up fine in OS X. The system profiler registers it as 6 GB of 1067 mhz RAM (the stock sticks are 1067 mhz)
I did a computing job after being retired for many months, and I got paid in hard drives.However, I also want to plug in my SATA DVD burner to the card at the same time. is that possible? A RAID set and a DVD burner on the same controller?I've never done anything above a RAID-0 before so ANY info would be appreciated, especially having to do with this particular model (others are out of my price range!
View 21 Replies View RelatedI just installed my brand new RocketRAID 2314 in my Mac Pro (SL 10.6.2).
Everything seems to be fine except for two things:
1. There are no eject-signs next to the eternal drives' icons in Finder windows. I can, however, eject them by highlighting them and hitting cmd-e.
2. And that's the actual problem: When I switch off the external enclosure after ejecting the drives properly, the card's beeping alarm goes off.
Isn't the RR2314 even supposed to be hot-swappable? Then it should by all means let me switch off the enclosure without starting to whine, shouldn't it?
Or is it a firmware issue? I already tried to flash the card with the latest firmware using HighPoint's linux-flasher and a Knoppix CD, but the flasher couldn't find the card (which _is_ properly installed).
I have done some research on triple boot systems, and it appears that a third OS must be run virtually, but all the information I came across was a few years old. Microsoft is running a deal right now on Windows 7 for students so I would like to pick up a copy and try it out.
Is it possible to run 3 operating systems through Boot Camp 3.0? I am not interested in running a virtual OS.
Current Setup:
13" macbook pro
Snow Leopard and Windows XP through Boot Camp
Just an FYI. Tech Support at Allsoft states The Disk Warrior 4.2 Boot DVD will not Boot the new 2010 MBP's. They are waiting for information (software) from Apple.
Will need to use Target Mode or another Mac connected with Firewire till then. Boot from that then run DW from your MBP.
I have a G5, 1.8Ghz computer with OS 10.5.8 installed. Some problems developed and I tried to run Disk Warrior. The disk shows up on the desktop. but won't start when I select either the "C" key or use the option key. The same thing happens when I use an external drive that has the startup drive cloned several months ago. When I use the Option key only the original startup volume appears. When I use the "C" for Disk Warrior the the system folder appears and switches with a Question mark. Again when I try to boot from the OS 10.5 install disk, I have the flashing folder when I hold the "C" down. The same problem I had with Disk Warrior.
View 2 Replies View RelatedFor future reference: what is the best way to get open the CD tray (if installer disc needs to be put in) if your system won't boot? I thought I would ask in case this situation arises. I'm not using a Mac keyboard and there is no eject button on my keyboard. It's a G4 with mirrored doors but I don't see any buttons to eject the tray.
View 3 Replies View Relatedi was having some difficulties with passwords and whatnot so i popped in the mac os install disk to boot up password resetter through the utilities menu so i changed my log in password thru there but then when i booted back everything was gone like everything was set back to default..my music folders gone my settings gone like everything
View 12 Replies View RelatedI have a Mac Pro 2008. I just got my second Crucial 256 gig SSD. Wanna make it a Raid 0 with my first one. Here are my thoughts.
Process 1:
1. Use disk utility to restore image of original Crucial 256 SSD to external USB drive
2. Boot up with SL DVD
3. Build Raid 0 using two drives. (do I need to 0 out?)
4. Restore image to Raid 0
5. Boot
Process 2:
1. Boot off DVD
2. Create Raid0
3. Use SL to restore backup from time Machine to Raid 0
4. Boot
I have been over so many settings in system preferences its making my head spin. Every time I boot my macbook that is running snow leopard it makes me log in. This is a very recent thing and I honestly didn't do anything to make it happen. When the problem first started happening it would also have the spinning thing on the bottom of the screen for about 5 seconds at the blue screen when shutting down. It doesn't do that as of lately though. If anyone knows how to stop it from making me log in every time I boot let me know. I will be checking back so if anyone wants to use ichat to log onto my computer to check settings let me know.
View 10 Replies View RelatedI have a Mac Pro, Intel quad core, with several HDs, 2 of which are bootable. One runs Mac OSX 10.4.9 (and houses Pro Tools HD 7.4) and the other runs 10.5.8 (with Pro Tools HD 8.0.2). The Tiger disk is absolutely fine but the Leopard disk will not boot from a stand-still. It can be booted from Startup Disk in System Preferences but if it was the last drive in use then trying boot from off results in a permanent hang on the grey screen. A workaround is holding ALT on startup and choose the Tiger disk but this shouldn't be happening so has anyone experienced this and solved it? I'm trying to avoid a full re-instal but that is an option.
View 1 Replies View RelatedMy early-2010 i7 MBP keeps freezing within minutes of boot. I just tried booting in safe mode, and it just froze for the 6th time in 24hrs (like the 4th in a row). I've never performed a time machine backup with this computer (I got it about a month ago), so a full restore would be an absolute last ditch option. Like I said, this keeps happening within a minute of boot. The screen is on, but everything completely locks up. The cursor can't be moved, keyboard doesn't do anything, etc. I have to keep forcing it to shut off w/ the power button.
View 9 Replies View RelatedThis machine WILL NOT ALLOW an Install Boot from ANYTHING other than the Jaguar CD. Screen "blinks" when I attempt to use Sys Pref to designate the 10.4 DVD ... Holding down "C" key is a waste, PRAM & NVRAM have been attempted. Re-installing the 10.2 OS still has the SAME RESULT: Machine refuses ANY Sys Pref Startup OTHER than 10.2 ... PERIOD ... Just get a "blink" on the display, no Error Msg, just a blink .I've erased, zeroed & formatted the 80GB HD, matching RAM (4 X 256MB) ... so I'm pretty sure I need to get this "Firmware" thing resolved so the logic board stops being ILLOGICAL ... or ... is it IMPOSSIBLE to go from 10.2 direct to 10.4? Again, Machine info is;400 MHz PPC G4 Silver 1 MB RAM, with a CLEAN 80GB HD As far as OTHER Posts have indicated, I need to download & run the 4.1.7 firmware ... it is VERY DIFFICULT to find ANYWHERE that is governed by Cupertino ...
Info:
Power Mac G4 (PCI Graphics), Mac OS X (10.3.x), Frankenstein Assembled Machine ...
my macbook pro wont boot up past grey blank screen with spinning icon....how do i boot using cd ?
Info:
MacBook Pro, Mac OS X (10.6.1)
I have downloaded Lion OS 10.7.XX trhough App Store. When I tried re installing the OS it failed after the bootup due to the Hard drive error. Now it is recommending me to format the Harddrive then re install the OS. I'd like to go back to my previous us so that I back up my data prior to formatting the hard drive. How can I boot from my previos operating system that was installed on the device?
Info:
MacBook Pro, Mac OS X (10.7.3)
My HDD is split to 3 partitions at the moment:
-Mac OS X (primary, OS does not boot)
-Storage (formatted for Mac)
-Windows (NTFS)
Is it possible to reinstall Mac OS X without formatting storage nor Windows partitions?
I was doing some cleanup on my macbook pro, deleting old log files and suddenly the system froze. I turned off and then on the laptop and to my surprise, the Mac partition doesn't show up on bootcamp menu, and I'm taken directly to Windows.I tried booting from the install disk and repairing the disk with Disk Utility, and although all my data seems to be all right (I can see all of it from Windows), and Disk Utility did not find any errors, when I reboot (while holding the option key) only Windows shows up.
View 1 Replies View RelatedI am upgrading my hard drive in my MacBook Pro and before removing the old hard drive I backed my time machine up to a NAS (Network Hard Drive). I put in the new drive and booted from the Snow Leopard DVD. I formatted it for HFS+ and then selected the option to Restore System from Full Backup. I selected my network hard drive and all seemed to go well. After clicking restart, the machine restarted, gave me the chime, and then displayed the infamous multi-language kernel panic message with some text in the background. Here's a paraphrase of the background text:
"panic (cpu 0 caller) version mis-match between Kernel and CPU PM @/SourceCache/xnu/xnu-1504.9.17/osfmk/i386/pmCPU.c:707
Backtrace CPU 0,... 4 potential args on stack
i found an old clamshell ibook today. it started right up and all; seemed to work fine. well, now it wont boot at all. im by no means talented in this area, but i love to tinker around with stuff, i tried putting an airport extreme card into the wireless slot, and of course i dont think to shut the machine down to pull it back out. basically the screen distorted and froze. did the logic board get toasted?
View 2 Replies View RelatedI just got my first Mac computer (yay), but as I always do with new operating systems, I have already run into a few problems. I tried to use Boot Camp to install Windows XP, and it all went through, but after the installation somehow the XP system was deleted and now I have 2 Mac OS 10 partitions.Um, I'm sorta lost at this point. Since I just got my Macbook Pro today, I don't have any files on it except for 24 music files. I am currently reinstalling the operating system onto the Macintosh HD, but I'm not sure if that will relieve the problem.
View 3 Replies View RelatedI have Leopard installed on my main drive (MacPro). I was wondering if I could install Leopard again, but on another one of my internal drives for experimental purposes? Would I be able to choose which install to boot from? To clarify, I don't want to create another user account, I want to dual boot the same OS.
View 8 Replies View RelatedI'm about to order a 2x2.26Ghz 8-core Mac Pro.I still have to decide whether to order it with the base hard drive (640GB)or the 1TB hard drive (as the boot drive).What would you recommend? Is the 640GB hard drive faster t
View 5 Replies View RelatedI am a network adminstrator (for a windows network ) but personnally an Apple User. I am savy with linux and unix enough to get around etc, so my knowledge is broad and indepth.I have never had issues with my own Macs in the past 5 years, but my friends MacBook has an interesting issue.She told me that the computer was doing updates, and she didnt want to wait for it to finish and just shut it off in the middle of some OSX updates.
View 2 Replies View RelatedI'm just not having luck with my last 3 MacBook Pros. My new 2.8ghz 15" now takes over 7 minutes to boot to the login screen. Before this happened, I recently copied 139 GB in sound libraries to my system drive. Before I went to work, I quickly closed the laptop and put in my bag. When I took it out of my bag several hours later, the unit was off and battery practically at full charge. When I started it shortly afterwards, it took forever to boot. It would sit there at the grey screen with the spinning circle, then get to the blue background (just before you get to the login screen) and wait there for a while. Most of the time I think you can hear the hard drive churning.
Once you log on, everything seems to be normal. I'm curious if perhaps that 139GB copy did something to the OS to slow it down. FYI it has 274/ 500 GB of free space left. Perhaps the hard drive didn't have a chance to park when I quickly put the laptop in my bag and I damaged it? To complicate matters, I have the MCE optibay installed with a 320 GB hard drive loaded in it. The only thing I can think of is to back up, and reload the OS. This should tell me if it's software or hardware related.
I have a macbook here that is stuck in a restart loop. It boots until it gets to the blue screen and flickers and goes back to a post screen and keeps retrying. It also displays a message that a crash log was written to file xxxxxxx.I can boot into single user mode and found the folder containing the crash log, how do I view that file in single user mode? If I can't read it in single user mode how can I read it, transfer it onto usb and view on my imac?
View 6 Replies View Relatedgrey Apple screen on my Mac Pro. If I unplug my external hard drive (MyBook 1TB, formatted HSF, USB) it takes 15 seconds. From the Apple logo it takes another 20-30 seconds to fully load OS X. I really don't want to unplug my external drive every time I restart.
View 3 Replies View RelatedMy dads MacBook Pro started acting weird first the screen would freeze up and the cursor could still move but there would be about an inch wide black line that would follow on top of the cursor wherever you moved it.
We thought it was a software problem so we booted it up off an external drive and it did the same thing after a few seconds of loading the finder, now it won't even boot, it loads the white screen with the apple, then it stops at the blue screen where it usually shows the loading of everything, once in a while it will get past that but it freezes with black lines over the cursor.
I've tried zapping the pram and i've held the power button down till it beeps i've also reset the pmu, so im out of ideas.
My mac has been acting really slow lately... it takes a while to boot , and programs take a while to load as well... im new to mac
View 4 Replies View RelatedI am running OS 10.5.8 with Windows XP dual boot on my MacBook that I purchased in late 2008.Can I easily upgrade to Lion at this point without having to reinstall the Windows XP/dual boot etc?
Info:MacBook, Mac OS X (10.5.8)
