in an effort to load windows vista into my machine I partitioned my harddrive and put the windows installer into my machine. When I didn't have enough space to load (partitioned 5gbs, needed 6.9 or something) I was unable to remove the disk from the drive for 30 minutes! I looked up these types of forums and couldn't find a solution.
View 1 RepliesI tried to install Windows Vista (64bit) using Boot Camp. I get to the window where you select the disk partition you want to install Windows on, and there aren't any options. How can I get the newly created partition (the one I made with Boot Camp Setup Assistant before restarting) to show up on that list? Or, where do I find the "driver" that it requests instead?
View 12 Replies View RelatedThis is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies View RelatedCan vista 64 bit use all 8 cores of the mac pro when running under boot camp? And can you set how many cores vista uses if running under vm ware? Looking at getting one end of the year but need performance on windows still.
View 14 Replies View RelatedI'd like to set up a separate 3-drive striped software Raid0 solution in Vista to increase write performance for FRAPS capturing, but need guidance on how to proceed.
Mac Pro 8-core 2.8GHz "Early 2008" 14GB RAM WD 640GB x4
Drive1 - Mac OS 10.5.2 / Windows Vista Home Premium 64-bit (Boot Camp 2.1)
Drive2 - Striped Raid0 1/3
Drive3 - Striped Raid0 2/3
Drive4 - Striped Raid0 3/3
The 3 latter drives is what I'm trying to configure, but don't know how to do so for my Vista partition. Is this even possible? If so, does Vista have this built-in capability, or would I need to download a third-party software raid utility?
I have recently installed a version of Vista on my Macbook to use an online test-taking software that my university insists on using. Everything seems to work well. I set the default partition to OS X and can easily get into Vista if I need to (which fortunately isn't very often).
However, today I noticed an issue that is annoying. When I open Vista, the time is off by about 6 hours. It's set to Central time (where I live) and everything seems fine, but is just off by 6 hours. I didn't think anything of it, so I changed the clock to the correct time.
Then when I was finished using Windows, I restarted back into OS X and everything seemed flawless. Everything was working exactly as I left it. However, after a few minutes I noticed the clock in OS X was off by exactly the same amount I had to change it in Windows.
How could this be? I thought that by partitioning my hard drive I was unable to access the portion I am not currently using. For example, I can't save a file to the Window portion of my hard drive when using OS X. Likewise, I can't access Word files, photos, or anything on my OS X portion of my hard drive when using Windows.
How is it that when I change the time in Windows it changes it in OS X? And why are they different? Not this is a huge problem, but just a pain in the a**, and a little discomforting.
I'm trying to install Windows Vista Home Premium using Boot Camp on my MacBook Pro 15". I partition the Mac HD and I gave myself plenty of space on the Windows partition (52 GB) because I want to install large games on it.
When it comes to installing Vista I insert the DVD and click 'start installation'. It looks like it's going to work for a few seconds then it says that it can't recognize the DVD and the disc just ejects itself.
I tried to partition the HD then restart and hold down the 'C' key to boot from the DVD. The same thing happened, the disc just ejects itself...
get Vista installed? Will I have the same problems trying to install XP because if not then I will just install that. I would prefer Vista because of the DX10 compatibility for Crysis.
there i have a macbook pro and i have recently installed windows vista 32 on it using boot camp. also recently i have updated boot camp to 3.1 and my sound seems to have stopped working.
Although the red light in my headphone jack is gone my speaker icon on the right hand corner has a x on it and i cannot hear anyhting now. i have cheaked my sound driver and it is up to date cirrus logic cirrus logic cs4206a
So I installed Vista and then popped in the OS X Disc 1 to install the drivers, like I did with Win XP before. All I get on screen is the window where I get to choose whether to install OS X on my MBAir or install disc sharing....no drivers.
Do i need a specific version of Vista to be able to install boot camp drivers ? SP1 or SP2 maybe ?
I remember I had the same issue with Win XP SP3, which seemed weird since it's supposed to be even more complete then the previous version, right ?
I am currently in the process of selling my gaming pc, in order to buy a mac pro. My old system was an intel core 2 quad, 4GB PC2-6400 low latency, and an 8800 GTX. I've had a macbook for about 18 months now, and i will never go back, hence my recent idea to move my desktop computing to the mac pro. However i am concerned about graphics power in gaming on OS X and on boot camp Vista/XP.
I am looking for some advice on what you think the best solution might be, and whether you think the 2 x 2600XT's will be powerful enough for the recent game s in the market (Crysis, COD4:MW). Also wondering if it is possible to use upgrade the mac pro to an 8800 gtx myself, and whether the 2 x 2600XT's needs just simply uses crossfire drivers on bootcamp windows. I am assuming the motherboard does not have an SLi controller, hence the lack of 2 x 8800GT's.
I've been reading up on ways to install Leopard from an external HDD image (.dmg), and I'm wondering if it is possible to do a similar function, but with Vista in boot camp. I'd like to backup both installers to an external HDD and make them mountable if the disks have a snafu.
Can you install Vista from an external HDD via Boot Camp? I imagine this would be an .iso or similar file type.
I was wondering if you can play Windows only game on a mac if you use -Windows Vista, Boot Camp(To install Vista) Then after you do that go to Vista side of you mac. And then install a windows only game onto it with a game CD OR download a torrent for windows on the windows side.
View 3 Replies View RelatedI just installed Windows Vista x64 on my 2.4Ghz Unibody Macbook this morning for some software development, and I accidently left my install DVD at home - I'm at college right now. Is there any site I can download the drivers for from? Or could somebody possibly send me a link to a download? I tried the 2.1 download on Apple's website, but it doesn't start up.
View 8 Replies View RelatedI'm trying to run Boot Camp Vista through Parallels but i don't know how to set it up and can't find a guide anywhere. There's one in the settings but that skips over the most complicated bits. Anybody know of a guide for doing this or know how to do this?
View 13 Replies View RelatedEverything seems to be working well except there is no sound from speakers on the Vista side. Still OK on Mac (of course).
I have iMac 3.06gHz
Checked that sound is not muted etc.
It does seem to have two volume controls (Vista) in the dock? One Realtek and one Mixer. Neither are muted. Device Manager says all is ok and running latest software.
One other small matter is that I can't seem to load a network adapter. It finds new hardware everytime I open but can't find any software and as I don't know what I'm looking for I am sort of stuck.
I've had a Vista 32 PC and it booted pretty fast. I now have a fully loaded iMac (newest one available) and Vista takes abnormally long to start. OS X boots very fast, and once Vista is loaded, it runs normal, no problems. I'm just wondering if there is a way to reduce the boot time, and why it would take longer to boot on this more powerful computer than my last generic PC, or if that's just a drawback of boot camp.
View 6 Replies View RelatedI downloaded the 2.1 update for Vista and when i try to open the .exe in Vista i say agree to let the program open and then it just doesn't do anything.
View 20 Replies View Relatedi'm a HUGE gamer, so the first thing I did once I loaded this new computer up was install my copy of Windows Vista on it using Boot Camp Assistant. The installation went completely smoothly, so I then proceeded to install the Boot Camp Drivers onto my new and fresh and clean Windows Installation.
I restarted the computer and everything seemed to be in working order...but there are two relatively MAJOR problems:
One, the one that is the most pressing, is the sound. When I started up after installing all of the boot camp drivers, I couldn't get a single audio device to get recognized by my Vista Home Premium installation. I tried disabling and re-disabling other drivers in the Device Manager, and when I try to download new drivers for the one audio device that has an error sign next to it, Vista claims that it is already updated to the latest drivers, so it will not install new ones. I even went onto cirrus' website to download their official drivers, and the same thing happened.
I recently upgraded my Imac Harddrive from a standard 320 GB to a 1.5 TB Segate Barracuda 7200 Rpm 3GBS. Previously I had a boot camp partition for windows 7 ultimate. When I put in the new harddrive I decided to start fresh and do clean installs. Now when I try and install Windows 7 it goes fine until the last restart (4 total including initial restart). Then it just gets stuck at the screen where it says "Push any Key to Boot from CD or DVD". It will stay like that for a few seconds then the disk will stop spinning. So my question is now what do I do? I have to have windows for work purposes and this is driving me insane.
View 19 Replies View RelatedRecently I was unfortunate enough to witness the spilling of gin and tonic on my precious macbook pro. Luckily, having had spillage issues before, I reduced the damage and now have merely a few keys not working (including both option keys) and some dodgey letters.
After turning off my mac it restarted automatically in boot camp mode and with both option keys broken I can't get back into OS :/ What's more, my boot camp has no sound and the internet doesn't work so it's pretty much turned into an iphone charger.
I was wondering if anybody knew what I could do to rescue my files and what I should do about the broken key situation?
I am trying to install Windows 7 Ultimate onto my Mac Mini using Boot Camp Assistant. On the Windows 7 install it reboots three times. On the third time, it boots to black screen with "Press any key to boot from CD or DVD...." When I try to hit any key on my Apple Wireless Keyboard, it does nothing. Same thing when I hook up a wired USB HP keyboard to the mini. It is entirely unresponsive. I have tried letting it run for a while to see if it would move on. I have tried changing the startup disk in Mac OS X to the Windows partition but I get nothing but a blank black screen with a flashing underscore.
View 3 Replies View RelatedI've been hearing good things about the Spinpoint Drives and the 750GB ones are coming down in price.Here is my current setup1 - 500MB Drive - Leopard2 - 320MB Drive - Vista 643 - 500MB Drive - FAT32 (Shared, Irrelevant)I plan on replacing drives 1 and 2 with 750GB Spinpoint drives.My question is, can I boot off of the Leopard dvd and put in Drive 1 and NewDrive1 and just clone it, and do the same for Drive2 and NewDrive2 and clone it? And then go into Leopard and resize the HFS partition, and go into Vista and resize the NTFS partition?
View 2 Replies View RelatedI have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
I've installed the drivers, and when I start up in Windows, neither the internet or the wireless pick up.
Using Windows Vista Home Premium. The little wireless icon in the tray just has the big X, so it's literally picking up nothing. I also can't connect via ethernet.
I am running Leopard on a 1st gen macbook. I used boot camp assistant to partition the disk, and then went to install windows. I didn't back up bc I am an ass. Then I got to the part where I had to choose a partition. I reformatted the Boot Camp partition to NTFS. I then realized that the partition is too small. I have to get back into Leopard to fix the partition problem. Now, I can't reboot to Leopard. Holding alt or the apple key or both does not prevent the windows dvd from booting. When I eject the DVD, it tells me "no bootable disk." I never installed Vista. I don't understand how I could have overwritten anything or caused any data loss.
View 11 Replies View RelatedI keep getting this error..."The disk cannot be partitioned because some files cannot be moved. Back up disk use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."So I've checked and my HD is already a Mac OS Extended (Journaled) volume. I've gone to Disk Utility and verified the HD, verified permissions, and repaired permissions. I don't know what else to do. I don't want to backup the entire drive and format it.
View 12 Replies View RelatedI want to partition my disc, but boot camp cannot verify the disc. How can i fix this? I want to install windows 7
View 4 Replies View Related