My 2009 Mac Pro Quad-Core 2.66GHz is arriving today. Along with an extra superdrive, RAM, PCI USB card, and two hard drives from OWC. Should I install all of that before or after the initial startup process of the Mac?
View 8 RepliesI took the mac plunge this past week and so far I'm loving OS X. I would eventually like to upgrade the stock 250gb to a 640gb, and install the kingston 40gb ssd drive into an optibay as the dedicated boot/app drive. First, for a dual ssd/hdd system, putting the ssd in the optibay is the correct strategy right? What is the best way to attempt this switch?
If I replace both drives at once, I'm screwed because I need the optical drive to install os x, correct? So should I install a OS onto the 640 first, and then install the ssd? I'm also relatively new to time machine, so I'm not sure what its capabilities are--will i be able to only back up my applications? In the end, I'd like to be able to boot from the ssd and store videos/pics/etc in the HD.
Ever since I installed the latest iTunes, it has been doing the first time setup time everytime I open it.
View 1 Replies View RelatedIn my Mac Pro I currently have the stock HD as my OS/Home drive, while the other two 1TB WD Black drives are RAID 0 partitioned into a 1.5 TB Data drive and 256GB Scratch. I have these and my OS/home drive backing up to time machine but when I eventually upgrade to 10.6 (and probably clean install) will I lose my RAID setup and have to re-create it byte-by-byte in order to restore from my Time Machine backup? Or would I have to do the 'upgrade' installation to get around this since I used Disc Utility to create my RAID setup?
View 15 Replies View RelatedI have a used Macbook and would like to wipe the HD and re-install Snow Leopard to give as a gift. I would like the person receiving this computer to be able to start it up like a new computer and go through the start up with the music and having to enter names and password just like a new computer.
Is there any way i can do it (otherwise i will just erase the drive and give the disk with the computer for him to do himself)
Info:
powerbook 1.5GHz, Mac Mini core Duo, LaCie 250GB rugged ext. HD, Mac OS X (10.6.7), Time Capsule 1TB, AEX, iMac 27" 3.06 core 2 duo
I have a Macbook running Mac OS 10.4.11 which i believe is Tiger. I just purchased a refurb 2009 macmini which came with came with setup disc which includes snow leopard. Am I able to use that disc to install snow leopard on me macbook? If so how do i go about doing it.
View 10 Replies View RelatedI just installed Snow Leopard and accidentally cancelled the setup assistant. How do I relaunch the setup assistant?
Info:
iMac, Mac OS X (10.6.3)
I've been working on this for about 8 hours and I'm going nuts. I am using an Imac OS X version 10.5.8.I purchased a Canon MP560 today and can't figure out the problem. I don't even know where to start. I'm trying to connect the wireless printer using Airport. There is nothing listed when I click on 'Preferences- Print and Fax'.
I read the instructions that came with the printer several times, up to a point. I clicked 'wireless lan setup' on the printer. It's asking me for a lan access point and a wep key. I've used Google until I can't even think anymore. I read Airport is like a router, or can be used as a router. The blue light is on on the printer, and it says it's searching for a connection but can find one.
My brother is going to start school in June for Film. He is all set to buy a Mac and knows the software side of things but not so much the Hardware side.
I have a few questions:
1. Should extra hard drives be bought third party?
2. Should he do a raid setup for backups?
3. How much memory should he buy for Final Cut operations? (third party)
4. Should he look into getting a Dell monitor instead of Apple? What is a comparable Dell monitor?
5. 4-Core or 8-Core?
6. Any other knowledgeable Mac Pro buying advice
I am trying to do a command line / automated installation of Lion. I would like to know how to restore InstallESD.dmg or OSInstall.mpkg to a blank partition without the Install assistant. I would also like to know how to bypass the setup assistant after reboot.
Info:
MacBook
Pro, Mac OS X (10.7.3)
I am trying to setup a firefighter's apple laptop into our linksys net at firestation. She got access fine when we did not have it secured but now we setup a wep key. All other members can get in by entering wep key when they choose the wireless router but when we input the wep key to apple laptop airport I think we get connection error. Key is definitely right. What changed in the apple setup other than the wep key, again when signal was unsecure laptop safari worked fine. The linksys is a B about 3 years old.
View 9 Replies View RelatedMy new display has VGA and HDMI inputs. My MBP has DVI, so does it make a big difference between VGA setup and HDMI setup? Which setup should I go with?
View 3 Replies View RelatedI've got to setup/configure three new iPad2's on the mac that I have which is already associated with an iPad2. I know that there is a way to have iTunes not sync/backup a new iPad 2 as I've done it before, but I cannot remember how to do it.
View 1 Replies View RelatedThis is the first time i reinstalled(clean install) my snow leopard on my MBP. All went fine but then i inserted the disc for bundled application (which contains the ilife apps) but it keeps failing.
It says that "the installation failed. the installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance".
I've also done my research on this matter. I've gone thru a few steps i tried as below without success:
1)normal install - fail
2)repair permission - fail
3)install in safe mode - fail
4) install using another admin acc - fail
5) made an image out of the disc and install - fail
6) used a similar disc(my dad's since we have identical version) - fai
7)updated my system and install - fail
8) reinstall the mac - fail
i cant think of any other solution as im a bit noob when it comes to mac. is there any other things i could try before taking it Apple?
Info:
MacBook Pro, Mac OS X (10.6.8)
I've been trying to install and use BootCamp from Apple, so I can use Visual Basic for my classes. Obviously, I need Windows for this. Anyway, i downloaded BootCamp, installed it, and then Windows XP. After this I was told to insert my OSX disc to get the drivers. Well nothing happened at all. I suppose because this install of Leopard didn't include BC, it was a seperate download.I then read that BC Assistant should give me the option to burn a drivers disc. I looked at the provided screenshots, and right where the button should have been, there was nothing.
View 6 Replies View RelatedMy MBP was recently squished in a motorcycle accident and its hard drive and superdrive were destroyed. Is it possible to buy a new hard drive, put it in an external USB 2.0 enclosure, then install OS X on it using the discs that came with my destroyed MBP in a different Mac, then put the hard drive into the squished computer and have it use that hard drive as its startup disk? The motherboard on the squished computer is fine, I just can't install OS X on it because it has a broken superdrive.
View 4 Replies View RelatedI searched for a while trying to find the answer but did not find it. I just installed Vista Business via Bootcamp. I am not able to access the internet or anything. If I read the help stuff right I need to use the OSX install disk to install the drivers. The problem is, I don't have the install disk. Is there any other way to get the drivers? Or am I just missing something easier?
View 5 Replies View RelatedI'm using a iMac PowerPC G5 that I've received from my brother. He gave it to me with a fresh install of Leopard on it, but he unfortunately no longer has the disc that came with the computer that he also used to format it before handing it to me. With that said, I ordered a new internal hard drive. Naturally, I'll need to re-install Leopard, but I don't have an install disc anywhere. How is this going to be possible? Or will it not be? Do I have to buy a new Leopard install disc? If so where and how much?
View 6 Replies View RelatedThe internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
I jsut did a fresh install. wanted to use my SL DVD but the MBP i5 refused to star with it so I used the original DVD (10.5) and upgraded with the SL DVD to 10.6. However after the initial SL Installation, it tried from the SL DVD and this failed. I did a manual restart, starting from the HD and everything ran fine. however today I note there is a locked file on the HD named Mac OS X Install Data. It contains 181 .pkg files.Now I suppose this should have been moved or deleted as part of the install process. Can I move them to a file where they belong?
Info:
MBP, MM, MBP - 10.6 + Windooz XP on a hard partition
I have a dual 2ghz G5 that i wanted to clean off and start fresh. I wiped the drive with disk utility and tried to install os from tiger install dvd. G5 keeps hanging at install and also at disk utility. I've swapped both the osX install dvd disk and the entire dvd drive, but still hangs at os load or utility.
View 3 Replies View RelatedI am trying to install Aim Sniff which runs through terminal. I am slowly figuring out how to use terminal to run .pl files but the readme files says I need to install these dependencies.
Code:
Requires Samba to perform SMB lookup features.
Requires the following perl modules:
Net::Pcap;
NetPacket::Ethernet qw(:strip);
NetPacket::IP qw(:strip);
NetPacket::TCP;
NetPacket::UDP;
DBI;
Unicode::String qw(utf8 latin1 utf16);
Proc::Daemon;
Proc::Simple;
FileHandle;
Unix::Syslog;
GDBM_File;
I got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
View 9 Replies View RelatedI have an aluminum Macbook from late 2008, model A1278. I just had to replace the hard drive, and need to install an OS on the currently blank HDD. Problem is, my CD drive doesn't work, so I can't just install from a disc. I had installed Mountain Lion on my old hard drive, but the original OS was Snow Leopard. I haven't succeeded in getting any of my information off my old HDD. Is there another way to install either Snow Leopard or Lion onto my new hard drive?
View 1 Replies View RelatedI bought the family pack for Leopard. I installed Leopard on my G4 laptop fine.When I tried tried to install on my G5 I got a fail to install due to a source problem (?)In any event I restarted from the Tiger hard drive and it's totally screwed up my computer. It tries to start and I get initial Apple logo for about 2 seconds then it locks up and I get a bunch of computer code.
Information:
G5
Mac OS X (10.4.9)
Searched the archives but no luck so far. My old PB G4 is running 10.4.11. When I installed the OS, I chose not to install iPhoto and iMovie because I didn't think I'd need them on this machine. I'd now like to add them, but am not sure how to do it without wiping the hard drive and starting completely from the beginning. There's got to be an easier way...right?
View 4 Replies View Relatedi just bought a macbook pro and i want to do a clean install but it didn't come with the install disks. is there a way to do it without buying new disks?
View 24 Replies View RelatedI just replaced the HD in an iBook G3 I have laying around with a toshiba 40gb. The install went fine and I formatted it in disk utility using mac os x extended (journaled). I ran it for errors and it checked out fine. I also ran the apple hardware test CD and everything checked out there too. The problem is I am getting a kernal panic no matter what I do. I started off installing 10.3 and the first disc installs fine, but then when it restarts it gets an instant kernal panic. I tried 10.4 with the same results. Then I tried the 10.2 discs that the iBook came with and it would get the very last step of the install on the 1st disc and would not go any farther. It said "one minute remaining" for over an hour.
I have taken a picture of the error log that shows up and you can see here: The top line got cut off but it says "panic(cpu 0): Unable to find driver for this platform: "PowerBook4,3" Like I said, everything checks out hardware wise and i have tried three different versions of OS X.
I purchased the new Mac Box Set with Leopard 10.5.6, iLife '09 and iWork '09.
I was 50/50 on which type of Leopard install I wanted to perform today.
Looks like the disc made the choice for me and performed, what I'm assuming, is the upgrade. All of my files, settings, etc. were intact after the reboot.
I have the Win 7 RTM currently installed on my Mac Pro, on a dedicated internal hard drive. I'm running VMware 2.0. I have the retail version of Win 7 arriving today. Anyone know if I can just install through Windows, i.e., while running my existing Win 7 installation via VMware, or do I have to go through the whole clean install via Bootcamp routine?
View 7 Replies View Related