I have had this WD "my book" ext. HD for about a year without a problem. Today after restarting the computer I got a notice, instead of the HD icon. On screen I got a box that said "the disk you inserted is not readable by this computer" below this was 3 options. Initialize, ignore, eject". I was afraid that initialize would erase or reformat the drive so I pressed eject, I've tried many times but still the same thing. Has my ext. HD died? Should I click initialize? All my backup data & time machine, music,etc., is on this drive, I don't know what to do.
i have been using an external HD for a while now, i was using it today and it was working fine, then out of the middle of nowhere, i get this message: "disk insertion" the disk you inserted was not readable by theis computer....i run disk utility and get this message:[URL]can someone please give me some advice, i have a ton of important stuff on this HD!
I've followed the Bootcamp procedure correctly, but when I load my Vista Ultimate disk all I get is a blank screen. I've left it for a while, but even after half an hour still nothing.
What could the problem be, any tips?
It is a MacBook and 32 bit Vista if that if of use.
I have a 1TB MyBook from Western Digital. When I connect it via Firewire 800 to my MBP in Windows 7 (Bootcamp) it is recognised but when I start copying (read or write) it just hangs after a while or becomes very slow. If I connect it via USB it works. Do I need some drivers ? If yes, where can I found them? I found this on WD but I have the previous generation i.e. without the digital screen. If I go to the software download, it says that the drivers won't work with the previous gen.
I've been trying to install XP using boot camp, but when i try to partition the disk i get an error message saying disk needs to be repaired using the installation disk of mac os x, i've tried using the application under os x to repair the disk but i still get the error message, so i when i try to boot with the disk by pressing the "c" key nothing happens and the computer boots normally.
Ok so i been using a pny 4gb thumb drive and i used it earlier htis morning perfectly fine. i gave it to a teacher to upload work. and got it back and now its giving me a disk isnt readable on this computer. i tried goin to disk utility but its all greyed out. and ALOT of my work is on there.
I just recently bought my first macbook pro. I had a 500 GB WD elite passport drive. I partitioned it to Mac os extended (journaled)- for time machine and FAT for windows and mac file transfer and storage. I used disk utility to partition the drive. These two drives are detected in my mac, however when I plug in the external drive into my windows- no pop up appears telling me to open files. So I go into my computer and click on the (F) drive in my case. Windows vista then proceeds to tell me the drive must be formatted before it can be used. What problem do I have. All I want is 2 partitions one for time machine and another that will allow for data transfer and storage. I have looked but cannot seem to find and answer. I have a 160 gb hard drive, what amount of space do you recommend for the time machine partition.
I have a Seagate HD attached to my computer that was working fine with my old iMac, but when I just upgraded to a new iMac Version 10.7.4, 3.4 GHz Intel Core i7, it seems to be doing something srewy. I use that disk for my "Backup" files. Since I have switched it to the new computer, the backups continue to fail. An error message comes up saying "The disk you inserted was not readable by this computer." I tried to repair the disk, but I get an error message that states that the drive cannot be unmounted.
I have a Macbook Pro with an External 2TB My Book for Mac Hard drive. I used it earlier this week, ejected and disconnected it, went to sleep and then tried to use it the next day and the error message: "The disk you inserted is not readable by this computer." popped up. I have checked partitions, firmware, etc. and all are showing that it is there. It no longer shows up in Finder, though DiskUtility does show it, though it doesn't show any of the partitions, etc. it doesn't even have the name of what I called it.
- I am trying to get access to my files, I NEED them, (don't we all?!?) But seriously, these have hundreds of photos and videos of my college seminary on them and we need them for our 10- year anniversary.
I got this message every time I boot into Snow Leopard. It's the Boot Camp drive (not partition). I don't really need it in SL, but how to hide this warning?
I have been getting an error message each time I connect an external HD to my MBP; "The disk you inserted was not readable by this computer." which allows for 'Ignore' or 'Eject', I typically ignore and all appears to run fine, but still there is something obviously off a bit, incidentally the HD is a WD 640Gb that has my iTunes library?
I recently had a friend fill my hard drive with movies and DVD's. Until this morning I had no problem with viewing the files on my computer and through my tv, other than the fact that I had to download VLC player on my computer as the files were all avi. Last night I noticed that two of the individual files either wouldn't load, or dropped out half way through. I fixed these files by repairing them individually, which solved the problem. This afternoon, my files were working perfectly, with no problems at all.
Tonight, I have gone to plug in my hard drive, and it won't recognise it at all, other than to tell me that the disk I inserted was not readable by the computer. This afternoon my Mac suddenly needed to restart, the grey screen came over and I had no option but to restart my computer by pressing and holding the power button. This has happened before, but hasn't seemed to affect anything?
I've tried restarting the computer and changing the hard drive into a different USB port but neither have made any difference. I've also tried to repair disk in Disk Utility, which hasn't worked either. Is there a way to fix this? Or at least get the files off the hard drive onto another hard drive? The hard drive won't show in Finder so I don't know how to back up the files as Disk Utility suggests I do. The hard drive is a HP SimpleSave, about 2 years old. Never had any problem with it before!
I just bought a new 1 TB external hard drive for back up purposes. When i connect it via USB to my Snow Leopard macbook pro, it gives me a "this disk not readable by this computer message". I click ignore, and it lets me do whatever i want to the disk - read, write, etc. I have tried repair disk - tells me it's good to go, and tried reformatting several times - thought not zero disk data or the 7 pass bs.
Is there a way to increase the size of the displayed mail, as you are creating it? I have mine set to 12 point text, but it is still difficult to read. The e-mail when received is fine, it's the creating that's "tiny"?
I experience this problem for 2 days now. The wi fi says it is connected and all the bars are full but id doesn't load a single page!
The internet i've got is vergin so normally is very fast.Downstairs where we have a desktop computer connected to the D-link is working as normal.
When I open the network diagnostics in mac it shows : wi fi is green , wi-fi settings is green, network settings is failed(red), ISP failed(red), Internet failed (red), server failed red.
I'm trying to restore my old iMac G4 1Gb 15" to sell as it's in fine shape...but it will not boot from the (Leopard disk in the) disk drive. Is there a way I can do this with an external firewire? I've lost the original install disks too. That's why I'm trying Leopard. Suppose I could always just erase free space with disk utility but it's not very 'clean'.
I got this message this afternoon "The disk you inserted was not readable by this computer" with the options to either "Ignore" or Eject" This is in reference to my External Hard Drive "Buffalo" 1TB. I just got my Mac 27inch this week and when i got it i hooked up this hard drive to it, historically used on my old windows machine, but was still FAT32 formatted. I was able to upload all my pics to Aperture and music to iTunes. Was able to surf the data no problem. This afternoon i noticed that it was no longer visible in the "Finder" and afre rebooting several times,got this message "The disk you inserted was not readable by this computer" Neither the mac nor the HD was moved since yesterday, early this am when it worked.
Some info:I had used this external storage unit for more then a year.I sold my PC today so cant test if the hard drive still works on that. I have the latest 27 inch mac (2.7GHz)Storage is connected to a power source ( I tried both USB and FireWire, both yield the same message)
I am running a MacBook Pro, Mac OS X Lion 10.7.4 Recently, I had formatted by Western Digital 2TB harddrive into two partitions. One in Mac OS Extended Journaled) format, for backing up files via Time Machine. And the other in MS-DOS (FAT) format, for my normal harddrive use between Mac and Windows. There were no problems, until I had ejected it and replugged it into my MacBook a few days later. It came up with this error: "The disk you inserted was not readable by this computer". The harddrive doesn't show up on the Finder sidebar.
I tried opening it via Disk Utility, and gave me the following: Disk Description : WD Ext HDD 1021 Media Total Capacity : 2 TB (2,000,396,746,752 Bytes)Connection Bus : USBWrite Status : Read/WriteConnection Type : ExternalS.M.A.R.T. Status : Not SupportedUSB Serial Number : 5743415A4137383538373835 Partition Map Scheme : Unformatted In the Disk Utility:
It doesn't give me the option to Verify or Repair the disk. I tried erasing everything and reformatting it in Mac OS Extended (Journaled) format. It stalls on "Unmounting disk" for a few minutes then proceeds with another error: "Disk Erase failed with the error: Unable to write the last block of device" - and sometimes the harddrive would just randomly eject during this process. It wouldn't let me partition the drive to any parts (not even back to one). It also wouldn't let me restore I booted My MacBook into Windows 7 Home Premium and plugged in the harddrive. Again, Windows couldn't install the driver properly and thus, it didn't show up on "My Computer".
I'm assuming the hard-drive is corrupted. The hard-drive was working fine before all the formatting and partitioning - in a Windows format, I think. What might be the problem and what can I do to format and/or recover files from the corrupt hard-drive?
Do I need to purchase Lion? I just wiped my entire HD and initialized the Lion Recovery but it says " Cant download the additional components needed to install Mac OS X."
my laptop (macbook pro) doesn't turn on, because the battery doesn't work (may be because of moisture), and the 7 battery lights on the left side are off, and when I plug the charger in, the light on the magnetic socket turns on so dim ..
I have macbook pro And my mail has stopped working now. It worked fine a week ago . It doesn't check for new mails , even when I click on get new mail , there is no new mail. I tried to sign out and sign in again but that didn't work . I read few articles on the internet but they all said use the Mac OS X DVD and reinstall but I didn't get any DVD , all I got with my computer was a Manual.
I told myself not to do it. Don't update the Safari software to 4.0, you know how they always mess up these things. And yet, per accident I did. Of course Safari 4.0 doesn't work. Every time I open it, it shuts down. iChat also doesn't work anymore, and even the Dashboard shuts down every now and then. In addition, the computer feels incredibly slow. I can't download rapidshare links on iGetter anymore and everything just feels wrong. Countless threads have been opened on this matter with a variety of different problems for different people. Yet I have not read a proper solution. I have seen all kinds of technical solutions being offered but I'm not a computer wiz and I do not know the terms they use. I just want to go back to Safari 3.2 or at least the one before the 4.0 But I read that deleting Safari 4 and reinstalling 3.2 won't work because of a certain webkit that got installed with it, making it impossible to go back.
Mail.app will not download my work emails while I am at work, although it works fine when I am at home. The settings are exactly the same as for Thunderbird on my desktop, which works fine.
