I heard that ATI has enabled hybrid cross fire on Windows Vista.
Does that mean you can use 2 cards that are NOT identical?
Like my 2600 XT and my 3870?
Or does hybrid just refer to graphics card and integrated graphics hybrid?
I know a lot of us have the Elgato Eyetv Hybrid and would love to use it on our Macs in conjunction with Bootcamp & Windows. Well I finally figured out how to do it! All I had to do is slightly modify some Windows drivers.
The hardware being used is very similar to the Hauppauge USB Sticks.
Elgato made 2 versions of the hybrid; the older version without QAM and the newer version with QAM. (It has been brought to my attention they also have a new version out with radio capabilities).
I have only been able to test this on the hybrid WITH QAM.
I was able to slightly modify the Hauppauge drivers which allowed the Elgato Eyetv Hybrid to work under windows using both the Windows Media Center and the standalone player by Hauppauge.
So here is what you need to do:
Go to Device Manager
Vista users: Right click on Computer > Click Properties > Click Device Manager
Now you should see some devices under "Other devices" with a yellow question mark next to them. Both should be called "EyeTV Hybrid" There are two because the USB stick has both a digital and analog tuner.
Right click on either device > Click Properties > Click Details tab > Where it says Property, scroll down to Hardware IDs
If the bold numbers match, these drivers will work for you. (If they don't match please provide me with your numbers so I can try and make drivers that will work for you.)
USBVID_0FD9&PID_0008&REV_0005&MI_03
Now we can close the EyeTV Hybrid Properties windows which brings us back to Device Manager.
Download both the modified drivers (an attachment below) and the manufacturer software here:
[URL]
Unzip and open the manufacturer software, navigate to the Drivers folder, and replace: HCWemBda.inf and HCWemBda64.inf with the modified drives you downloaded from me. (You also have to unzip and open the folder you downloaded from me).
Now go back to your Device Manager window, Right click on one of the EyeTV Hybrid devices with the yellow question mark next to it and click Update Driver Software...
Click Browse my computer for driver software > Click browse and navigate to the drivers folder from the manufacturer's software > Click Ok.
Do the same for the other device in Device Manager.
Now go to the manufacturer's software you downloaded earlier and double click Setup.
Finish the install and you should be Done
Just bought an eyetv hybrid. I ran it through my dual G5 and sent it back to my tv and wasn't impressed with the video quality. It ran a little better on my new mac mini (I love the mini!!!) but was wondering what kind of performance I would get from the 250 when viewing HD Channels. Can I expect better performance from the 250 on HD channels or are the two models comparable? I noticed that the Hybrid seemed to lag somewhat when there was movement onscreen. Also, will I be able to get Comcast HD channels? I plan on upgrading to HD service soon.[My apologies if this has been addressed: I've searched through some of the threads and I didn't see anything make mention of the HD capability that is now available to 250.]
View 4 Replies View RelatedRunning win 7 pro 64 and I am getting TV.
View 2 Replies View Relatednow that windows 7 (64) is working properly another question came up. Does win7 support fire wire because my external MyBook does not mount when I connect it to my iMac with fire wire 800.
View 4 Replies View Relatedi have searched a lot but haven't been able to solve my problem
i have a windows XP box on my network
i can connect to the C$/D$ admin shares via smb://.... only when the windows firewall is OFF - when i enable it, i can't connect
i have allowed ports 135-139,445 in the firewall, but still no luck
So I bought the newest EyeTV Hybrid under the assumption it would (with little tweaking) operate in windows as well.
Which it doesn't.
The device is recogniezd as EyeTV Hybrid in windows, VID=0FD9 PID=0018.
I'm trying to install the Hauppauge software (4.6b) to use it.
So, I edited on of the .inf's so that my gf's comp now thinks the device is a HVR-980. And am installing as I write this. The hardware search/driver install bounced befor I edited the infs, but now says it got the 980 installed, requiring reboot... -> So, off to reboot.
I will report back to you.
For those unaware of what Hybrid SLI is, it allows you to use the integrated and discrete video cards that the higher-end MacBook Pro's come with together simultaneously to get you better performance in graphic-intensive programs and games. I saw an option under the "High Performance" power plan settings that enables Hybrid SLI, but that disappeared after installing the Boot Camp drivers. I found out through a quick Google search that it would be easy to bring the option back, but does the MacBook Pro really support Hybrid SLI now and do you think it would be safe to use it on the MacBook Pro? Hybrid SLI could definitely add a few frames per second when playing games, so it would be a nice addition considering how every MacBook Pro has a mid-range video card.
View 5 Replies View RelatedSo it was my understanding that all the mac pro motherboards have supported SLI, only that it does not work under OSX. Do you need to have special SLI enabled nvidia cards or would the stock 120GTs work? ie, if you were to purchase it with 4 120GTs would they all work using SLI under windows? Just throwing it out there as I a) don't have the cash to buy 4 and b) I much rather have a fast 4870 that works in both mac and windows.
View 17 Replies View RelatedIs it better for me to buy the upgrade for windows 7, from vista to windows 7 or to buy the full copy? If i buy the fully version, should i get rid of my pardon, and re-do it with bootcamp, or should i just do it over my current pardon? (Vista) I just want the best way, less pain, less anger. Im willing to pay more for full IF IT IS THE BEST way to do it.
View 1 Replies View RelatedI'm running Windows vista ultimate on my Imac and lately the mouse started acting weird on Vista, it's jumping around and moving unpredictable,and also i use windows in spaces, and i can't switch to spaces anymore until i click control + command, please let me know what the problem is, ohh i'm running a USB G9 Logitech mouse.
View 1 Replies View RelatedI have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
I installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista.
On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
Does anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done;
1.Open up bootcamp assistant
2.Partition, divide equally(116GB each)
3.Insert Vista disk and start installation
4.Install Vista and insert CD key
5.custom installation
6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
I recently installed Windows vista using going through parallels because my bootcamp failed a while ago. This partition also acts as my bootcamp. Well The internet on parallels works fine because it is using osx network, but when i boot into bootcamp the network drivers seem to be missing. I cant figure it out, but it says the ethernet and network drivers are not there. I cant find the drivers on the internet anywhere and when i use the vista disk i have it still does not want to install them.
View 2 Replies View RelatedI just bought a new MacBook pro 1 week old. I partioned my hard drive and installed a clean copy of Windows Vista Ultimate on one side. I then downloaded skype, but my internal microphone will not work. I tried everything. Can someone help me out with this issue.
View 3 Replies View RelatedLast night I installed Windows Vista to run a game on here, but I got several issues. I already installed the drivers from the Snow Leopard DVD, but the problems still persist.
The issues are:
1. Sound is very very low and uneven. I have the volume all the way maxed, but the loudest it can go is less than half than the potential volume in Snow Leopard.
2. Headphones don't work. I've tried like 3 pairs of headphones and none of them work. When I plug them in, the sound still comes from the left speaker (I can barely hear the right speaker) on the laptop and not on the headphones. Also, the headphone jack is emitting a red light out of it.
3. The lights on the keyboard won't shut off. I used the F5 key to turn off the keyboard backlighting, and while it goes very dim they won't shut off.
I already tried the suggestions on this thread but none of those fixes work. I need help! Especially with the sound! Anything at all would be greatly appreciated.
I'm running a MacBook Pro 13" from June 2009, 2.26GHz Intel, 4GB of RAM, and an Nvidia GeForce 9400M. I instlled a 64bit version of Windows Vista (OEM).
I've installed the drivers, and when I start up in Windows, neither the internet or the wireless pick up.
Using Windows Vista Home Premium. The little wireless icon in the tray just has the big X, so it's literally picking up nothing. I also can't connect via ethernet.
im about to install windows on my macbook via bootcamp. However, i will use the same partition for parallels, which means that my ram is goign to be damaged. I wanted to know which os did u recomment me to install. Does windows 7 hog more cpu and ram than vista?
View 13 Replies View RelatedI'd appreciate it if anyone could offer me some advice on whether to go with the 32bit or 64bit version of Vista on a 4-core 'Nehalem' Mac Pro. I've read that some drivers will fail to work under this version of the operating system - is this the case for the hardware in the Mac Pro (particularly the HD 4870)?
View 6 Replies View RelatedI have the "collectors edition" macbook unibody....2.4ghz 4gb ram, 250gb hdd. On apples website it states that x64 is compatible with the new 13" pro but not mine...i didn't think there was any difference really besides firewire and a sd car reader....is it possible to install x64 vista via bootcamp or not??? I need to have vista on my laptop for "Examsof" for lawschool and parallels is not allowed.
View 12 Replies View Relatedi have my aluminum 2.4GHz 4gb RAM aluminum macbook with the geforce 9400m. and i was wondering. is DirectX 9 better then DirectX 10?. even if the difference is only 8 FPS it still counts.(really the only game im going to play is elder scrolls 4 oblivion)
View 17 Replies View RelatedHas the situation changed with the new IMacs? Are they able to run 64 bit vista like the mac pro and MBP, or are they like the past generation of IMacs?
View 6 Replies View RelatedI just bought a new 24" imac with 3.06GHz, 4GB memory, 1TB hard drive, and the ATI Radeon HD 4850 512MB graphics processor i am still waiting for it to arrive but am wondering which MS software i should go with xp or vista? i have been reading around to see what other ppl are saying about vista but most ppl are running it on the older imacs or pc's and im seeing that some ppl love it and others dont... so im wondering if there is anyone out there who is running vista on the new imacs and which software would be best for my mac? im using windows only for gaming.
Depending on when my imac arrives i might just skip out on buying xp or vista and wait for windows 7. but if it comes soon i dont want to have to wait forever to get windows 7 before i can start playing games.
I have this issue where whatever version of Windows I try to install when it gets past the initial software load up to the part where it asks what language you want it will just stop and stay there. With Vista it's after the scrolling progress bar, I get the curntains background and that's it. Nothing more. With Windows 7, same thing—after the swirly Windows logo appears and then it should ask what to do, it doesn't show that window. I've tried:
1) Ripping out all my drives, except the one I need.
2) Installing Snow Leopard client and trying BootCamp
3) Change video cards
4) Disconnect peripherals
5) Reset PRAM, SMC, etc.
The know the disks are good since I have tested them, I've tried almost a dozen different copies of Windows from XP to Vista to 7; all with the same result. I can't install at all. It's quite frustrating since Apple has no clue to what's going on, and I can't take this to the Apple Store seeing that I don't have a car.
i currently have it formatted in FAT should i delete the windows xp partition reinstall xp under the NTFS format and then upgrade to Vista?
View 3 Replies View RelatedI just bought a Macbook Air, my first Mac! After a couple days figuring out how to navigate I am starting to get the hang of it. I want to network with my old Laptop PC to be able to see some files that I plan on keeping there. My question is this: Is it easier to set up a home network with Vista or XP?
I have Vista on my PC right now(and I've tried a few online guides to view my files but I can't get it to work) but I also have a copy of XP. I was thinking of wiping my hard drive on the PC and installing XP instead.
I have a Mac Mini running OS X 10.6.5, and a Windows Vista SP2 laptop. I sync my iPhone to the Mini, so all my photos and videos are saved there. Now, I want to be able to access the Mini from Vista on the laptop. Windows Sharing is on, and in Vista I select Run-> "192.168.1.100" (the IP address of the Mini), and an explorer window pops up asking me for a password. I enter the password for the administrator account I use to log in on the Mini, "user1" and "blahblah", where "user1" is the user ID, not the name associated with the account, i.e. "John Doe".
View 2 Replies View RelatedI have been running Vista in Parallels 5 on my rev B 1.86 MBA SSD. Now I see version 6 is out and what is the opinion about the speed increase? Btw, I still run Leopard 10.5 on my MBA.
View 2 Replies View Related