I had to reinstall Snow Leopard Server on my Mac Mini Server. I did it via a firewire connection to my MBP. Everything runs fine when I boot in target disk mode from my MBP. Problem is when I disconnect the MBP and boot just mini it gives me an error message that says I need to restart the computer. I have the two 500gb drives on the mini configured in a raid array.
Info:
Mac mini, Mac OS X (10.6)
currently using mac mini server for sharing files and folders. Would like to setup VPN to get access to files remotely.
-Model identifier: Macmini 3.1
-Mac OS X Server version 10.6.8
I am not sure if this version supports VPN.
Info:
Mac mini
I am a web developer using Mac to develop and Ubuntu Server to deploy. It's a pretty standard setup nowadays.The time came to replace my staging server ( which I keep at my home on a dedicated IP ) and I could not resist the allure of the new Mac Mini Server. So I bought one and tried to do a Ubuntu install and thought I could sell my OSX server license as I have no need of it.I imagine a lot of people not used to Apple's policies might think like this. So how did it go? Bad and then good.As far as I have been able to ascertain, it's impossible to install Ubuntu on a Mac Mini Server ( at least without the additional DVD-ROM drive which I refuse to buy ).What's more, the OSX Server license I bought is not transferable to non-Mac Mini Server computers so I can't really sell it anyway.
View 6 Replies View RelatedI have a 2009 Mac Mini Server with iStat Server installed. When I connect to iStat server with the iPhone app, I see no network usage (even though it is being used). iStat Pro widget will show the usage just fine. Any ideas on why its not showing up with iStat Server?
View 3 Replies View RelatedI don't use any of it and would like to update to lion with out the server portion.
Info:Mac mini Server (Mid 2010), Mac OS X (10.6.8)
The old Mini worked fine with my Westinghouse 24" LCD monitor (HDMI input -connected to Mini via DVI->HDMI cable).The new Mini Server 2010 has HDMI out, so I used a straight-through HDMI cable. The display looks terrible! All of the fonts appear to have a 'shadow' next to them - almost like an old analog VGA with 'interference'.Thinking it could be the cable, I went back to my old Mini's DVI->HDMI cable (and used the new Mini's HDMI->DVI adapter to connect to it). Same results.The Westinghouse monitor's native resolution is 1920x1200. The Mac says that it's configured for 1920x1200.
View 14 Replies View RelatedI do have a copy of the the Mac Mini SL Client software but I don't have another Mac to create the USB restore disc in order to load the client on the Mini Server via usb drive. I don't intend to use the Server Software and don't want to 'activate' the license so I can resell it instead. Can I just use the Server to create the bootable restore disc without 'activating' the Server License and locking it to my serial number? Or is there another way to create the restore disc if you don't have access to another Mac to run disc utility?
I'm thinking about purchasing a Mac Mini Server instead of an xServe.It will be used to serve client account http://www.apple.com/server/macosx/f...anagement.htmlWe have 3 iMacs and 1 (possibly 2) Macbooks - there will be 6 client accounts. How will the Mini cope if all 4 clients are logged in at the same time?Or should I just purchase an xserve?
View 2 Replies View RelatedFirst, I'm a n00b Mac user but I'm reasonably tech smart and I want to make the jump to OSX. I need a mac for the wife, who will use it in the living room connected to our TV. She does email, light desktop publishing, and a metric ton of movies and music: the iTunes library alone is 300GB. Plus she watches DVDs on it. I was thinking about buying a refurbed mac mini server (It's at a discounted price) but I don't need Snow Leopard Server. I'll add the external superdrive later.How hard would it be to just install regular Snow Leopard instead of Server?Also, in regular Snow Leopard, how would the HDDs show up in OSX? One big 1TB drive or 2 500gb drives?
View 7 Replies View Related One of the drives in our 2009 mac mini server 2009 has died. I have taken apart many minis so have no problem taking it apart to replace, but does anyone know which drive is the primary, "Server HD" drive? Would it be the top drive (first drive you come across during disassembly) or the bottom drive closer to the logic board with the two pads stuck on? Just wondering if anyone knows for sure so I can avoid removing the drive that's still working fine.
Also, to keep the server running in the mean time, I am booting to the second drive which is working fine. Just curious, once the dead primary drive is replaced , can I simply use carbon copy clone to copy back from the 2nd drive, or will I need to install snow leopard server back onto the new drive?
cannot find how to get into mac utilities with a normal keyboard on my mac mini(mid 2011). i have many problems with it being very slow to start and programs have vanished.i have 8gb of ram so this should be perfect and i use it everyday.
Info:
iMac, Mac OS X (10.7.3), also own a mac mini
So I installed osx 10.4 server on a Power Mac G4 (white/blue)
Went throught the setup screens and did a complete reformat / install.
Just boots to the loader screen. (Where the mac face shows, followed by a question mark) and just cycles over and over.
I can put the DVD in at this point and restart the install.. I did go in and check the disk permissions and disk status and both passed.
I turned off my mac while it was booting up and now it just gets stuck at the white screen. will i have to reinstall the software? will i lose my files?
View 5 Replies View RelatedCan I get the out of box experience without doing a complete reinstall? I know windows os's can do this with a command. Any ideas if SL server can do this? I don't need to save any setup info.
View 2 Replies View RelatedIt's an iMac G5 on OS X v10.4
Here's the problem:
When booting up normally it goes to a screen with an apple in the middle, and then some kernal panic code comes up:
panic(cpu 0 caller 0x002E1904) unable to find driver for this platform: "PowerMac12,1"
That's the first line of the code.
Anyway, i want to simply format the whole system and start from scratch with the system disk supplied with the imac. However, when i put it into the machine and press C at start up, it goes to an apple screen and hangs on that apple screen and does nothing else.
I've tried pressing the alt key and going into the boot options and booting from the CD there. However, that goes to the apple screen, then a little ajax style loading thing comes up. That sits there for a while until the apple turns to a "stop" style sign. This continues to hang.
I've tried resetting the PRAM and NVRAM by holding the Command, Option, P, and R buttons. Holding theses makes the computer reboot a few times until i let go. Once thats done, nothing changes.
I've tried holding X while loading up, this just goes back to the panic code.
I've tried holding shift while loading up, this again just goes back to the panic code.
I've cleaned the system CD and it makes no difference.
I have been trying to reinstall Lion OS without luck. First I tried through the app store, downloaded successfully, but then crashed what appeared to be about the end of the installation. It was at the point of installing the os on my hard drive when the black box style screen came up telling me to do a force reboot. Did the same thing and it locked up again. On a third try I used a Jump drive which had Lion os on it and the screen just sits at the "installing X" screen but its been hours and I can tell the Hard drive is not spinning and it almost sounds like the Mac is asleep.
Info:
Mac mini, Mac OS X (10.7.3)
The MacBook Air USB SuperDrive never worked with any other Macs without heavy hacking. What so different about the new Mini with Server OS X?
View 5 Replies View RelatedWhen you get a new OSX machine it asks if you want to transfer everything over from another machine, then you connect the firewire or whichever cable it tells you, and it does the rest.
I am replacing my Mini with a Mini Server (1TB), and on boot it asks if I want to transfer data from another "Server". I was hoping I could transfer from OSX to OSX Server since it's the same OSX just more options are added, I would understand it it didn't go in the other direction.
It gives me a blank window with Transfer Your Server at the top and says to select the volume to transfer from (none listed). It doesn't say how I would connect or select the machine from which to select the volume. Is there any easy way to transfer my programs and files over, or not, between non-server and a server version? I could manually share the HD on the Mini and drag over program and file folders etc. if there is no automatic way.
Tomorrow I will be installing the normal snow leopard in my mac mini server 2010. I want to make raid0 with the 2 500GB hard drives. But I dont know how to do it. I have to make it through the installation, or after it ? And is a raid0 so unstable that I HAVE to buy a back up HD ?
View 5 Replies View Relatednew to this forum, here to seek some help. I would like to run ical server on my mac mini to synchronize my ical from my laptop and i would need to give access to my colleague for her to do some scheduling. Hmm, is it possible to do so on a mac mini? I was managing my ical previously via mobile me but my colleague can only read but not write directly. And i dont wish to accept the invites from her to add to my ical every time. Will running ical server do the job? and even if its on a mac mini?
View 1 Replies View RelatedMy HDD is split to 3 partitions at the moment:
-Mac OS X (primary, OS does not boot)
-Storage (formatted for Mac)
-Windows (NTFS)
Is it possible to reinstall Mac OS X without formatting storage nor Windows partitions?
I got the fatal folder with with question mark and grinding sound of the hard drive when starting my 2008 Mac Pro this weekend. After some diagnostics it was obvious the Hard Drive is dead, of course its the main drive that runs the OS and all my apps. I am picking up a new drive today and was wondering the best approach to get it up and running again. Everying it is backed-up on my external drive through Time Machine. Since the drive is dead I can't use a copy cloner to the new drive. Would I install the the hardrive and start the Mac Pro to boot off the Leopard CD, intall that and then try to run the backup from Time Machine?
View 1 Replies View Relatedi know that diskutil has alot of commands and im not sure how to use them, i would specifically want to know how to use eraseDisk properly. Or is there any other way to clean install tiger without using darwin? I know eraseDisk gives me a format to use but i never get it right for some reason. diskutil eraseDisk "Journaled HFS+" MacintoshHD bootable /dev/disk0 -- this works i got it right now but it gives me this error: could not unmount disk for zeroing
View 7 Replies View RelatedI've been having big problems trying to solve my problem. I've checked all the posts related, tried all the solutions and still I didn't get anything, so I'm sharing my problem and hope for someone to have the solution.
I installed Windows XP with BootCamp and it was working fine.
But then the HD space of the windows partition was too small and I needed more space. So what I did was erase the partition with the Disc Utility.
But before that I wanted to test the Parallels to see if the windows 7 would work fine with it. It installed easily but I didn't like the performance of it, so I just erased it with the AppCleaner. Then I erased the BootCamp partition with Disc Utility.
But when I tried to use the Boot Camp Assistant again, it only gave me the message: "The Disk Cannot Be Partitioned Because Some Files Cannot Be Moved"I've checked the forums and it was said that probably if I use iDefrag, it would solve my problem.Once I did it, I still got the same message.Then I decided to repair the dic, so I did the verification and clicked on Repair Disc Permitions and I've got this message:
-The file SUID "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" was modified and cannot be repaired.
Then I decided to reboot the whole system inserting the installation disc and pressing the C button, but all I get is a white screen and no response. And sometimes the Macbook not even start properly (also having only the white screen and no response), so I need to press the Option button till the Mac HD icon appears and I can access the computer.
And now I really without any option and I wanted to install the windows.
I'm selling my old Powerbook G4. Before I let it go, I want to wipe the hard drive and reinstall OS 10.4. I also would like to run disk first aid because I suspect there may be some corruption. The problem: I still have the original system install DVDs that came with the laptop, but the DVD drive no longer works. It just spins the disks for a bit then spits them back out. I do have an external USB hard drive with plenty of free space. Is there a way I can copy the install DVDs (there's a Disc 1 and Disc 2) to the external hard drive, then boot from that drive and treat it like I'm installing from the DVDs? I also have my new MacBook Pro with a working DVD drive. Can I make my Powerbook boot from a CD in the MacBook's drive? If not, how else can I wipe my system and reinstall the OS without a working DVD drive?
View 3 Replies View RelatedI'm looking to centralize the media storage in our home and would love some feedback on which Mac Mini would best suit my needs, which are pretty modest. The goal is a machine that will:House all our media (iTunes, movies/tv) for streaming to two MBPs & one TV
Be the central location for Time Machine backups on all 3 computers
Run Air Video Server live conversion for streaming media to iPad
Run Plex for viewing media on attached HDTV
Ability to simultaneously stream media to TV in one room while live encoding HD source material for playback on iPad
Regardless of which Mini I end up with, my plan is to remove the Superdrive and install two 500GB Momentus XT hybrid hard drives (Raid 0?) with Time Machine backups for all the computers on external FW800 drives that I have. That said, will an early '09 Mini with the 2.0 C2D have enough horsepower, or do I need a current gen model?
Can you run a mac mini server just like a regular desktop model mac mini?
Does the server version of SL prevent you from using the computer like a regular mac mini with a monitor and keyboard and mouse?
Can anyone point me to a good beginner article on the use and setup of a server? I feel like I understand computers pretty well, but servers are a mystery to me.
I had a 2008 24 inch imac (3.06ghz C2D) and had some issues with it. First the hard drive failed, upon bringing it into the Apple store, they told me that they replaced the hard drive and screen (due to dust under it), however, this was not the case. What they had actually done is replace the entire unit and gave me a refurb which was previously registered to someone else (as evidenced by the registration info). A few months later, I had another issue, this time the logic board had failed and I once again had to lug this 20 pound beast through the largest mall in the city in order to get it to the Apple store (for the second time). I politely explained my discontent with this whole process, they did not inform me that the unit was a refurb and now it had failed yet again. Much to my surprise they offered me a replacement in the form of the i5 with a 1tb drive, 4 gigs of ram, the works. Now here is the problem: I was not given any of the included dvds as they do a "like-for-like" swap only. This is now an issue because I can not install Snow Leopard from the retail dvd, nor can I install Leopard from my previous iMac disks. In addition to this, I do not have the correct drivers for a boot camp install. Thus I am stuck if I ever need to reinstall Snow Leopard or if I need to utilize boot camp (which I do).
View 12 Replies View RelatedI bought my first mac, the Black MacBook, in June. Love it. I'm looking into getting a computer to run as a personal web server. I was looking into buying a mac mini, upgrading a few parts, and installing OS X Server on it. Has anyone tried this? Does the mini have what it takes to run as a small server?
View 12 Replies View RelatedHas anyone out there successfully setup a Mac Mini to be a server machine on a network? We're wanting to setup a Mac build agent for a continuous integration server, and the Mac mini seems like it would be a good, lower-cost option than a Mac Pro or XServe.
However, we are currently fighting with an old Mac Mini (~4 years old) that insists on going to sleep (and disconnecting from the network) after a period of time. I also saw this thread on the Apple support boards that seems to indicate that this might be a common issue with Mac Minis:
[URL]
If others have been able to use Mac Minis as servers, that would make me feel more confident about just buying a new one and assuming our current problems are due to a hardware problem with that specific machine.
