I switched from a 2007 iMac running leopord to a 2006 iMac also running leopord, and would like to restore my old files from my old mac. When I plug in my external drive, the new mac won't recognize it.
Info:
Mac OS X (10.5.8)
I've just bought the new Airport Extreme Base Station last night. I set up everything just fine. I've set up an external HD to the USB port and got it to work fine so far in terms of file sharing and reading and writing. I also have a dedicated Time Machine external HD attached to my MBP USB drive.Does Time Machine backup shared airport drives? This is a deal breaker for me. When I go into time machine after my latest backup, the shared airport drive doesn't show up .Am I missing something? Can time machine back up anything connected to the AEBS?
View 4 Replies View RelatedMy Time Machine drive is getting full. Can I just copy the backups to a new, bigger, drive and continue on my merry way?
Info:
imac, Mac OS X (10.7.2)
Can I use a usb thumb drive for Time Machine backups?
Info:
iMac, Mac OS X (10.7.3)
I have an iMac and send all my Time Machine backups to an Iomega 250gb external hard drive. Now Time Machine says the drive is full and cannot complete the back up- how can I delete some old back ups to make room for the latest one? And once I have room- restrict it to back up only once a week? I really want to use the drive for the music and photos- but fear not having a complete backup before i update to Mt. Lion.
Info:
iMac, Mac OS X (10.6.8)
I am looking for an external hard drive to work with time machine on a imac. All the reports I have looked at are really mixed
Info:
iMac, Mac OS X (10.6.8)
2012 iMac running 10.7.4 (lion). I have an external hard drive that I use for Time Machine. It has been working fine. Today, I turned it on to run Time Machine and the computer does not see the hard drive. I used a different cord to connect it. Still did not work. I tested both cords with a different external drive and they worked. So it is not the cords. The hard drive is getting power from its separate power cord. The hard drive knows when it is hooked up because the motor in the hard drive revs up when I plug it into the computer. However, the computer does not see it on the desktop or in finder.
Info:
iMac, Mac OS X (10.7.2)
I was trying to set up my Time Machine to an external hard drive. I didn't continue because it asked to "initialize" the hard drive which I had a lot of important things on.
I have another external hard drive I'd like to use but, my Time Machine has this error code of -43. What is this and how can I use my Time Machine on another external hard drive?
How I can erase my old time machine backups on my old external hard drive and re-use for something else to back up.
Info:
iMac (21.5-inch Late 2009)
I have an iMac desktop with OS X version 10.9.4 Mavericks operating system. Processor 2.06 core 2 duo Memory 4GB 1067 MHx startup disk hard drive.Â
Problem is I deleted some photos from my hard drive to free up space, thinking I could access them from my backup drive if I needed to. However, when I try to get the photos through my TimeMchine backup drive, it won't let me, saying it's not the original library. How do I access my old backed up photos?
I have a late 2006 iMac, which I know must be at the end of its life now, but at the weekend my main internal HD developed an error, and it wouldn't boot, even from the recovery partition.Â
I managed to find my old Snow Leapard disks and ran Disk Utility on my HD (when it actually saw it) and the error it came back with was "Invalid Node". After trying many things, I had to reformat and reinstall from my Time Machine back up, which went really well.Â
However, once all restored it tried to do a backup and it failed. I then went into Disk Utility again and it found the same error on the Time Machine drive.Â
Therefore, my question is, could the back up process have copied an 'error' to my back up? Or is this a fault somewhere else (Disk Management etc) that I need to watch in case it cases errors with my other drives that have important information on?Â
Info:
Mac OS X (10.7.5)
I upgraded to Lion and now my Time Machine does not work. When I connect the disk it starts and then shuts down. It does not show neither on desktop or on Time Machine. I hate the thought of reinstalling Snow Leopard but..
Info:
MacBook Pro, Mac OS X (10.7.4)
I have a further problem with my "time capsule" - When I go in to the time machine it will only show me what has backed up today - nothing from yesterday at all??
View 10 Replies View RelatedHow do I show package contents in Time Machine ?
View 10 Replies View RelatedI've installed SL, plugged in my external drive and opened Migration asst but only my Mac HD shows up (even though my ext HD is shown on the desktop).
How do I restore all my files etc.?
How can I show invisble items on //Time Machine Backups/Backups.backupdb? I've backed //Lion/ Users/User/ Library , but when i checked the backed folder, i could not find it.
Info:
MacBook, Mac OS X (10.7.3), RAM: 4GB
I am running Time Machine under Mavericks. When I looked at my Time Machine Backup files, I could not find the mail boxes in the appropriate Application support folder. It should be under Library/Application Support/Postbox/Profiles.I am also running Carbonite and have my POP mail accts getting backed up. I should have my email set up as a IMAP. I tried to go that route and after three weeks of dealing with my provider (and level 3 support) they informed me they could set it up for me for another $50. Â
View 2 Replies View RelatedI have my data saved on an external hard drive (OS 10.7) as I sold my previous Mac and am thinking about buying a power pc iMac using Leopard - does anyone know whether this will be able to open and transfer my data to the older Mac?
View 3 Replies View RelatedI have an external 500gb drive plugged into my brand new Time Capsule. The 500gb drive basically stores my entire library of music and my iTunes points to this external drive.
Is it possible to have time machine backup all information on the 500gb drive to the time capsule, so encase the external drive takes a dump, I don't loose my entire music library? Maybe time machine is already doing this, I am not sure.
As my 160N series Linksys router neither has gigabit ports, usb connector or dual band networking, I am looking for a replacement.
When it comes to Apple routers I am looking at 2 options - either the base station with an external USB drive or get a 1TB capsule with the buildt in drive and worries regarding reliability.
What I like about the Time Capsule is that it is neat to have all in one, takes up less space and only has 1 plug to attach, while Iike the idea that I can just connect a bigger drive later on the base station solution.
1. Will the connected USB drive function just like the internal drive in the Time Capsule for Time Machine use?
2. Will everything be transparent to Snow Leopard?
3. In case of both units with an attached USB drive - can I control who actually can see the drive and access it?
4. Do they support this DNLA thing so that e.g . PS3 can access an attached drive??
I have a thumb drive that if i plug it into my MacBook Air in the left usb port, it takes at least 3 minutes before it shows up on my desktop, sometimes MUCH longer. If i plug it into the right USB port, it shows up after a minute. If I plug this same thumb drive into a PC, it shows up within seconds. If i plug a different thumb drive into either USB port on the Air, it shows up within seconds.Â
It's a FAT32 thumb drive, and i've already tried reformatting it and the same stuff happens. I've even had disk utility check it out and nothing's wrong. I'd guess the thumb drive is bad but it works instantly if i plug it into a PC, so guessing that's not it. It's a 10.6 MacBook Air.
I have an iMac running the latest version of Lion (10.7.4) and which I have upgraded to a one terabyte hard drive and full memory capability. I back up to a My Book 2 terabyte external hard drive using Time Machine. My iMac is often very sticky, though I've done most of the diagnostics I know of and preferences etc. are seemingly all OK and fcuk -fs gives a positive result! The Mac is often hard to wake from sleep and in particular seems to spend a lot of time backing up very-very slowly, with the result that it frustratingly seems to be backing up most of the time with the consequent effects on using other programs. Also the whole thing seems to grind to a halt after a hard days work with quite a few applications open. I'm wondering what can be causing this and what I can do to overcome this very frustrating and debilitating problem?
Info:
iMac, Mac OS X (10.6.2)
I've got an external drive that was a Time Machine backup drive. It's at the police station as evidence for something and they will not let me take it back. However, they will let me come down and make a copy of it. I might only have one shot at this so I'm trying to think of the best way to do it successfully and quickly.
Can I just bring another external with me, my Macbook, and then copy the files from the Time Machine backup external drive to the other external drive? If so, what is the facility for doing this quickly? I'm kind of new at Macs and am unsure. I do not have an extra Mac that I can simply use Time Machine to restore to to replace it's contents.
My old time machine drive (250GB) seems to have died. I have a new drive (1TB). How do I:
1. get data off the old drive?
2. set up the new drive?
Info:
iMac, Mac OS X (10.6.8)
I would like to use FileVault to encrypt both my hard drive and time machine back up external drive. Does encryption noticeable slow down the computer.
Info:
MacBook Air (13-INCH, MID 2011), Mac OS X (10.7.4)
Basically I have a 750GB hard drive in my Macbook Pro and over 300GB is taken up with 'BackUp' data. This is more than the total of everything I have on the drive other than that. Time Machine has always been setup on an external drive and when searching all files on the Macbook there is nothing for backup files so don't know where it is coming from.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I'm a graphics professional taking the plunge into a Mac Pro. After some research, this is my notional drive setup:??GB SSD Boot Drive in the optical bay2 x 1TB 7200rpm SATA in RAID0, partitioned for 1.Data and 2.Scratch (therefore <2TB data)I obviously need to make sure that RAID0 is safely backed up. I've got an online backup service in case my house burns down and I'll be backing up individual projects onto optical media, but I will of course want to Time Machine the Data partition of the RAID.Now, for that Time machine drive I can either create another RAID0 from the same kind of drives (with the risk that entails), or for about the same money get a 2TB 5400rpm (leaving a drive bay free for future use, possibly another backup).
View 6 Replies View RelatedI upgraded the hard drive in my MBP (4,1 Mar '08) this weekend from a stock 5400rpm 250Gb to a 7200rpm 320Gb WD Scorpio Black. I used Time Machine to restore the system onto the new drive - via a new 1Tb external drive which I first prepped for network use via my AEBS but hooked up via FW800 to do the first backup before upgrading the hard drive. Laptop is fine - everything pretty much seems as it was - but Time Machine isn't. Every backup appears to be of the full hard drive contents (have only excluded the Parallels folder)! My otherwise empty 1Tb drive now has nearly 300Gb of backups of a 140-150Gb disk!!
Here's the du stats from inside the /Volumes/Backup of../Backups.backupsdb/..MacBook Pro :
144080500 2009-05-03-000434
142168476 2009-05-03-090644
142754912 2009-05-03-093113
35032544 2009-05-07-025139.inProgress]
3rd May was when I did the hard drive update so it was already doing the full drive backup right away, I had originally thought it was something to do with swapping out the hard drive but that's not so. I haven't been able to complete a backup since as its also incredibly slow. Left the laptop plugged in overnight and it had only completed ~30Gb in about 5-6 hours - over FW800! The drive is OK - I can copy over large files and that goes super fast as you'd expect. Ideally I'd like to keep at least the first backup from before the drive upgrade. Should I (can I?) move this onto another drive then reformat and start again?
I have a MacPro, OS X 10.5.7. I have TM configured to back up to an external 1 TB firewire drive. I use Adobe Lightroom for photography. it provides a checkbox to allow you to backup all photos as you import them from your camera card. Adobe recommends selecting an external drive for these backups. But for some reason, it does not allow me to select the external drive that TM uses.
View 2 Replies View RelatedWhen i insert a flash drive I can find it in the sidebar on finder but would like it to show up on my desktop. Is there a setting that will allow this.
View 4 Replies View Related