IMac (Intel) :: Hard Drive And Time Machine Invalid Node Error?
Sep 3, 2014
I have a late 2006 iMac, which I know must be at the end of its life now, but at the weekend my main internal HD developed an error, and it wouldn't boot, even from the recovery partition.Â
I managed to find my old Snow Leapard disks and ran Disk Utility on my HD (when it actually saw it) and the error it came back with was "Invalid Node". After trying many things, I had to reformat and reinstall from my Time Machine back up, which went really well.Â
However, once all restored it tried to do a backup and it failed. I then went into Disk Utility again and it found the same error on the Time Machine drive.Â
Therefore, my question is, could the back up process have copied an 'error' to my back up? Or is this a fault somewhere else (Disk Management etc) that I need to watch in case it cases errors with my other drives that have important information on?Â
Info:
Mac OS X (10.7.5)
View 1 Replies
ADVERTISEMENT
Jun 22, 2012
I'm having some trouble with my Macbook. It's running on Leopard 10.5.8. I recently tried to partition my hard drive and while doing so it prompted me informing me that there was an 'invalid node structure'. I could then no longer proceed with the partition. I had planned on updating my OS to Snow Leopard. I wanted to partition my internal HD, so I backed up some files on my external HD. I basically wanted my interal HD to run smoothly with a new OS while minimizing the space used. Now I've come across this issue where there is another message being prompted that says, 'invalid sibling links on hard drive'. I found THESE steps on another forum that informed me that this might restore the hard drive back to a readable/functional state but that didn't work either: Â Â Â Â
(These were the steps I took and nothing happened except another prompt informing me of an 'invalid node structure')
Boot off the OS X CD (reboot, hold C while booting).The installer will load up, go to Utilities in the menu and run Terminal.Type df and look for the drive that has your Mac system mounted---you'll have to unmount this. On my MacBook Pro, it was /dev/disk0s2.Type umount /dev/disk0s2, replacing disk0s2 with whatever disk your OS lives on.Type fsck_hfs -r /dev/disk0s2. If you umounted the wrong thing, it will complain that you can't repair a mounted drive. Go back and umount the right thing and repeat this step.Â
I then stumbled upon a few different forums mentioning something about Disk Warrior. I was wondering if THAT would resolved this issue. Honestly, I don't really want to spend much money on buying this but I WILL buy a new hard drive if I ABSOLUTELY need to. I was just trying to see if I can troubleshoot this before I decide to throw in the towel and buy a new hard drive or attempt to try out this Disk Warrior thing. Â
Info:
MacBook, Mac OS X (10.5.8)
View 2 Replies
View Related
Mar 16, 2012
I have an error of invalid node structure. Can I save my data from my hard drive? Is it even fixable?
View 4 Replies
View Related
Jul 2, 2009
It won't start at all or it starts and works really slowly at first. Like the processor would work million times slower, almost like just hangs jammed. Sometimes after hours of trying to get it started, it will start and work normally again for a long time. But when I shut it off or put it to sleep, again it's nearly impossible to get it started again.
The Disk Utility said, that there's an hard drive error "invalid sibling link". I booted from the OS X installation CD and did the repair, but it said it couldn't repair it. Then I did this fix: [URL]. But again it said the same error. Then I booted normally and checked the Verify Disk again and to my suprise it is now saying the hard drive is OK. But it still has the same problem! It just is having really difficult time waking up.
View 7 Replies
View Related
Mar 12, 2009
Two days ago my MacBook (OSX10.4) crashed; VLC player froze when I was watching a tv show. I though 'no biggie, happens now and then' and hard-resetted my 'book. Tried opening the file again with Quicktime, again, computer froze up. Waited a couple of minutes, hard-resetted my laptop again. Only this time, the screen got stuck on grey/lightblue-ish screen during boot-up.
Tried a lot but couldn't get my MacBook up and running again. Started up with the OSX cd popped in and went to Disc Utility. Mac then told me there was a 'Invalid Node Structure' and that 'The volume could not be repaired'. During a third or fourth start-up this changed to Mac saying there was a'sibling error'.
I checked some sources online, figured out this should be something fixable. One possible option was Disk Warrior. Supposed to be *the* tool with problems like these. I replaced my malfunctioning HD, put an old HD in my MacBook, reinstalled OSX and put the malfunctioning HD in a stand-alone case and connected it too my MacBook. As we speak DW is busy rebuilding the directory but it has been doing so for over a day now. I've read online that it can take a couple of days though. My HD is 250Gb with 30Gb empty space when it went kaput.
Now, there seem to be a couple of other alternative options. These lads talk about Tech Tool Pro - apparantly some other program that could help: [URL]
Then there's a couple suggestions/methods mentioned online that either involve booting up in single-user mode and type some code [URL]
Has anyone ever had their HD act up like this? Any experience/recommendations regarding the programs/methods mentioned above? I'm pretty new with Mac (used PCs for ages, switched to Mac quite recently) and I'm kinda at wit's end here :/. I was in the process of backing up my stuff, but there's a boatload of data on that HD that I hadn't archive yet.
View 3 Replies
View Related
May 10, 2010
I'm having big problem with my notebook.
It goes down after the gray start video.
Doing the fsck this is what comes out...
View 6 Replies
View Related
Aug 23, 2010
I was trying to set up my Time Machine to an external hard drive. I didn't continue because it asked to "initialize" the hard drive which I had a lot of important things on.
I have another external hard drive I'd like to use but, my Time Machine has this error code of -43. What is this and how can I use my Time Machine on another external hard drive?
View 2 Replies
View Related
Apr 10, 2012
It is a 2008 intel iMac that had worked fine for the last four years until lion. Everytime there was and update or I rebooted, my Mac would freeze at some point of the login. A permission repair or just repair disk would solve the issue an everyone and a while, a restore from backup. Recently my Mac started to slow down to the point it froze for several hours and force quit would never open. I held the button and since then I have been in trouble. The repair permissions had a ton of errors but successfully repaired. But when I repaired the disk, it's hit a couple of errors but ultimately failed right after "Invalid Node Structure" that error has been consistent every time I have attempted a fix and it failed. I tried restoring from a backup to no avail. Then I wiped the drive and installed Lion (after a convienient 5 hours download) an it booted. I tried using it but it was extremely slow, let it sit over night and came back to it frozen. I had assumed it was slow due to indexing but after 12ish hours this didn't solve the issue. I clicked the apple button and it took a while to finally show up an restarted. Fro
There is wouldn't complete the boot. Froze at the apple logo or white screen with spinning mouse. Left that for several hours and stayed there. Tried repair and same issue. "ivalid node structure" redtating aftet that it just reboots and turns off a little bit after the chime. I have tried everything I could find on different forums without any success. I tried single user mode with the fsck commands and that failed also. I downloaded lion and made a recovery flash drive from another computer. I have since installed several new installations of lion after an erase and repartition. I took it to the apple store and they installed a fresh install of lion and it worked for a day then slowed down and froze. I would like to try everything possible before claiming the hardrive dead. I forgot to mention I have done PRAM resets in between the events I described as well as the SCM i think reset by unplugging. I have left it unplugged for over 12 hours, also have taken out all peripherals minus keyboard and mouse.
Info:
iMac, Mac OS X (10.7.3)
View 5 Replies
View Related
Aug 27, 2010
Just finished setting up my new 27" iMac and the last piece of the puzzle is to setup Time Machine. I have an external 500GB hard drive that Im not using (even though my hard drive is 1TB, Im only using 157GB right now so the 500GB should be fine). My concern is...will it slow down the computer when its backing up since the drive is USB? Would it be worth buying a Firewire 800 external drive (~$150)?
View 9 Replies
View Related
Aug 29, 2014
iMAC with OSX10.9.4 ; 8GB ram ; two partitions external disk formatted MAC jurnaled ; connected via Fire Wire or USB2 .
During Backup the sistem get stack and display into the "details window"Â Time machine was unable to complete the backup because unable to complete the backup folder.
This problem happens with USB and Fire Wire. The file backups.backupdb is excluded from virus scanning.
Also happens time to time that (without doing things) both the partitions of the external disk disappaire from the desk-top and a message "the disk must be ejected properly" is displayed.
This two problems are independent une to the other. I have change the backup disk but both the problems persist.
Info:
iMac, OS X Mavericks (10.9.4), 8GB ram ; external backup HD
View 3 Replies
View Related
May 5, 2012
I am looking for an external hard drive to work with time machine on a imac. All the reports I have looked at are really mixed
Info:
iMac, Mac OS X (10.6.8)
View 4 Replies
View Related
Sep 6, 2014
I have all of a sudden started getting an error code -36 from an CF card copying to my mac?
Info:
iCloud
View 1 Replies
View Related
Apr 2, 2009
I want to wirelessly time machine backup to my time machine hard drive already attached to my iMac.
View 1 Replies
View Related
May 7, 2012
How I can erase my old time machine backups on my old external hard drive and re-use for something else to back up.
Info:
iMac (21.5-inch Late 2009)
View 1 Replies
View Related
Dec 31, 2009
I've been using this external hard drive since Christmas Day and suddenly it doesn't work. I attempted to verify my disk and it came back with "Invalid Node Structure". I've been using this for Time Machine Backups but I don't mind losing them because there isn't really anything majot but I'm currently copying my two largest folders off there because it tells me I need to format my disk as soon as possible. How do I do that?
View 3 Replies
View Related
Feb 7, 2010
I have a 17inch intel iMac, early 2006 (the first release). A couple of days ago it decided it no longer wanted to boot up. Inserting the install DVD and running disk utilities verify/repair, it said that the volume had an invalid b-tree node size, and attempting to repair the volume failed.
Everything is backed up from this computer, so at this point in time I am only worried about getting it running again. So, I dug deeper to resolve the issue.
View 4 Replies
View Related
Dec 27, 2007
I set up a RAID using 4 Segate 320GB SATA drives in it's own box. It is connected to my G5 (OS 10.4.1) via a Highpoint RocketRaid 2210 card. After 2 months, I have gotten the b-node tree error twice. The drive fails to mount and drive utilities (including Drive Genius, DiskWarriror) can't fix it. I was able to use Drive Rescue 2 to get the info off of it, but I am concerned as to why this keeps happening. I can reinitialize the drive and get it working again, but this is not a solution.
View 2 Replies
View Related
Aug 27, 2008
I have been lucky enough to receive the dreaded: B-Tree error
My question is.. will DiskWarrior fix it? and is this a signal that my harddrive is heading downhill?
View 14 Replies
View Related
Mar 28, 2010
My friends Macbook would only boot to a blue screen. So I booted from system disk and checked the HD. Got this error;
invalid node structure
And now it's;
rebuilding catalogue b-tree
It's been like this for over 10 minutes - is that normal? Is there anything else I should do?
View 1 Replies
View Related
Jun 11, 2012
I recently dropped my even a couple of drops of diet coke near the DVD drive of my MacBook (2009).Turned it off immediately and turned it upside down for a bit. Tune it back on and it worked fine. However, the second time I turned it on it wouldn't go past the login screen. Turned it off as then on again, and started up fine. Ran a disc diagnostic and it gave me the invalid node structure message. From there it started to run slow so I shut it off again. Haven't turned it on since. I'm thinking of taking it in to a shop since I don't want to mess with it anymore.Is there any easy fix to this? If my hard drive is messed up, can I recover my data?
Info:
MacBook, Mac OS X (10.6.4)
View 1 Replies
View Related
Jun 19, 2012
I am receiving an error 5.5.4 "Invalid Email address error code 17099 indicating that mail could not be sent for Account name: "Msn". I have recently moved from a PC laptop and have been sent email messages to this account on my iMac successfully for several weeks. The email address in question is actively sending and receiving messages. I can receive email from that account.
Info:
iMac, Mac OS X (10.7.4)
View 1 Replies
View Related
Sep 6, 2014
I have an iMac desktop with OS X version 10.9.4 Mavericks operating system. Processor 2.06 core 2 duo Memory 4GB 1067 MHx startup disk hard drive.Â
Problem is I deleted some photos from my hard drive to free up space, thinking I could access them from my backup drive if I needed to. However, when I try to get the photos through my TimeMchine backup drive, it won't let me, saying it's not the original library. How do I access my old backed up photos?
View 2 Replies
View Related
Apr 23, 2012
I use a LACIE external hard drive to back up via Time Machine. I am having problems backing up, the backup starts and goes through 'prepare items' and then starts to back up, then stops about a quarter of the way through to 'clean up' and then 'fails'Â Â I used the Time Machine Buddy and the error message is :Â Error (-36) NO Copying/Applications/Utilities/JavaÂ
Info:
iMac, Mac OS X (10.6.8)
View 2 Replies
View Related
Mar 30, 2012
I installed a new hard drive on my iMac and got it up and running. I'm trying to restore my computer from the time machine and it says 168 hrs to complete. I've tried it twice and it gets about 7% done until I get an error that says I must restart and try again.
Info:
iMac
View 13 Replies
View Related
Apr 5, 2012
When downgrading from Lion using Time Machine got error message, how do I proceed to not lose data?
Info:
iMac, Mac OS X (10.7.1)
View 5 Replies
View Related
Jul 2, 2012
I would like to use FileVault to encrypt both my hard drive and time machine back up external drive. Does encryption noticeable slow down the computer.
Info:
MacBook Air (13-INCH, MID 2011), Mac OS X (10.7.4)
View 1 Replies
View Related
Sep 5, 2014
Basically I have a 750GB hard drive in my Macbook Pro and over 300GB is taken up with 'BackUp' data. This is more than the total of everything I have on the drive other than that. Time Machine has always been setup on an external drive and when searching all files on the Macbook there is nothing for backup files so don't know where it is coming from.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 3 Replies
View Related
Feb 27, 2012
Time Machine will not back up, with following error message.
Starting standard backup
Backing up to: /Volumes/My Book/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Node requires deep traversal:/ reason:must scan subdirs|new event db|
Error: Flushing index to disk returned an error: 0
Backup canceled.
iMac running 10.6.8
2.66 GHz Intel Core 2 Duo
Info:
iMac9,1, Mac OS X (10.6.5)
View 2 Replies
View Related
Jun 2, 2012
I located the time stamped backup, selected my hard drive, then did "RESTORE".The first thing that happened was a message that it was preparing to copy to 'volumes'It got to about 3823 items when I got the error code 8003. I wanted to restore my entire iMAC to that stamped date-time.
Info:iMac, Mac OS X (10.7.4), restore from time machine
View 5 Replies
View Related
Dec 21, 2009
I bought a Seagate external drive to use as backup, and formatted it for Mac. However, time machine fails to open and gives error message.
View 2 Replies
View Related
