I'm running 10.7.3 on an iMac Intel core i7. When I restart and hold Option key, nothing happens. The PRAM shortcut worked, but I cannot for the life of me, get the boot options to appear! Need to boot from external drive.
Info:
iMac, Mac OS X (10.7)
ive tried to install my new hdd (seagate barracuda 1tb) and i startup with option key but i get a padlock with password?.
Info:iMac, Mac OS X (10.6)
I have Black MacBook with 10.7.3 in it when i press alt/option while starting the laptop the startup manager wont come and OS X boots.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)
I am attempting to select a different startup volume. I restarted my Mac Pro while holding the Option key. The Startup Manager screen never appearded for me to make a selection. I have two bootable volumes on separate internal disks available. I see them displayed in Disk Utilities.Â
Info:
Mac Pro, Mac OS X (10.7.4)
Immediately press and hold the Option key. After a few seconds, the Startup Manager should appear. The Startup Manager scans for available available volumes. <- This doesn't work at all. I'm using apple wireless keyboard.
Info:
iMac, Mac OS X (10.7.4)
I have my imac apart right now and replaced the internal HD as it was not working. I assume the problem is the new one is not formatted with OSX, so from the INSTALL CD I opened the disk utility and see only one drive called "MEDIA".? Or is that just part of the install dvd that looks like a HD? In the system it shows as not formatted, 0 bytes. When selected in Partition it says :
"This voume is the startup volume and cannot be erased. Size 7.1 GB The disk is not writable and cannot be partitioned"
So i guess thats not my new HD I am seeing? Other than that there is only the two OSX install CD icons.
I replaced my hard drvie in my A1208 iMac yesterday, and didn't have the OS disc or a keyboard. After installing the HD, I booted the computer to make sure everything was working. I got the "?" screen, and everything seemend to be working just fine. So today, I picked up a keyboard from the Apple store and dug out the disc After I got back home, I booted the computer to install the OS, and the screen went black a few seconds after the chime and grey screen, but was still running. (I could hear the fan and disc spinning) I've tried to restart, but i'm still having the same problem. I've tried to research other issues, but haven't found anything comparable.
Info:
iMac
How do I get my computer started so I can trouble shoot. Freezes during startup on Firefox begins loading!
Info:
iMac
I am trying to load a clean valid copy of OSX on my older clamshell. It will take up to 10.3 and that is what I'm using. I keep getting this error " Startup Disc was unable to select the install CD as the startup disc" error (-2). This occurs after the software requests restart to start the process.
View 7 Replies View RelatedSo I recently purchased the Apple Wireless Pro keyboard, the one with the larger keys and numeric keypad: [URL] It works great and I love it! But, it does not recognize when I hold the "alt/option" upon startup if I wanted to use my bootcamp drive.
View 3 Replies View RelatedI am having a problem with my volume on my iMac. It is turned all the way up. and I keep turning it down everytime but when I restart or shutdown the computer when it boots back up it is back at being 100% volume again. How do I fix this to where it is at a decent volume at startup?
View 3 Replies View RelatedThe title pretty much says it all. I have an early 2009 13" MacBook, and no matter what the volume is when I shut down, it's always at max when I turn it on again.
View 11 Replies View Relatedhow can i change the default volume level in SL upon startup? it used to startup with whatever level it was at before i restarted. now it readjust each time.
View 4 Replies View RelatedI have Onyx and I did the usual diagnostic. It then says that "startup volume needs to be repaired" and that I need to boot into my Mac Os X install DVD and go to Disk Utility. I put in the DVD, press restart, and hold C. While my mac is rebooting it ejects the disk and takes me back to my normal desktop. What did I do wrong? Or what can I do to fix it?
View 1 Replies View RelatedSadly I have a feeling I will be here asking for help for most of the week (if not month) as I run into problems.
Everytime I reboot my system, my volume is set to the max. I can lower it without issue, and if I log out and back in, the volume stays the same. It only happens when I reboot. Anyone know why this is happening and/or how I would go around fixing the issue?
Edit: I think the issues I am running into are caused by bad permissions on most of the com.apple.* files. Will the file be recreated with the correct permissions if I move/delete the files? If not, what should the permissions be so I can manually change them back.
Before I forget, yes I have been repairing permissions, but not all the files are being fixed.
is there anyway to change the start-up AUDIO volume from being at full blast to something less loud?? Same with when you unplug headphones, it always go to full blast!
View 5 Replies View RelatedI'm using Onyx every so often when things start to get sluggish. Recently, things keep flying out of whack for no obvious reason. Like, USB ports stop working, or icons won't load. When I run Onyx, it tells me that the startup volume needs repair. I'll put in the Snow Leopard disk, repair the startup volume and return to Onyx, which then says everything is fine and goes about its business. Then, after not too long, things fly out of whack again and I'll need to repair the startup volume again.
What causes the startup volume to need repair? Is there some way I can avoid this kind of thing? Is there something I'm doing that's making this happen?
This would be an obnoxious problem to try and recreate for the Apple store people. Taking it in there, they'll probably just repair the startup volume and send me on my way.
The problem began with the Mac running slow and then freezing. Shutting down and restarting (if possible) gave some improvements until finally I got to a point where I could not open up anything from the desktop. I was able to open up my applications from a Firefox image on the desktop. If I placed anything in the applications folder I could open it up as normal. After doing some back up I then began to try different lines of appraoch for solutions:
First: I went into the Disk Utility and verified the disk and repaired permissions. This did not solve the problems.
Second: I booted the computer with TechTool Deluxe. I ran the tests and it found an error on the Volume it scanned---Error -4. I then did a repair of this error which went through successfully. The program then proceeded with another scan and uncovered Error -694. I let it run through the fix process but chose not to save the changes because it eliminated so much of my data. I was hoping I could find another solution before having to resort what appeared to me to be so drastic.
Third: I thought I might try and re-install Mac OS X 3.9 but there was no volume showing to write it to.
Fourth attempt: I tried to boot the computer with my Mac OS X installer CD and then to use disk utility from there. I noticed that my startup volume appeared in the list of options within disk utility but was 'greyed ' out instead of bold faced. I was able to select it and run the Repair function but that failed. I also noticed that when I selected that start up disk it said it was unmounted. I clicked on the mount button but that did not do anything. I then quit installer and it asked me to choose a startup disk, I chose Network Setup since it was the only option. After that when I would try and start the computer I would get a flashing world sign followed by the folder with a flashing question mark. I realize now it was trying to start from that Network Setup, but could not and afterward it could not find anything to boot from and thus the question mark
Fifth attempt: I tried to boot into Safe Mode. I could not. I tried to boot while holding down the Option key. Startup Disk Manager comes on the screen but there are no start up disks to choose from. It appears my Hard Disk has vanished.
Sixth attempt: I then booted again from TechTool Deluxe and ran through the whole process again, but for some reason the repairs could not be completed. I tried several times but the program keeps giving me the same message: "The Volume Structure Rebuild could not be completed"
The best I can figure is that I had a progressively failing hard drive which finally totally gave out. This seems to be the best explanation for all of the problems but I am hoping that someone on here might have a solution for me which I have not discovered yet.
Whenever I startup my macbook pro recently, the small startup tune has suddenly become really loud and there doesn't seem to be any way of making it quieter. Anybody with any idea what caused it and how to solve it?
View 4 Replies View RelatedI'm retrying to install windows on my mac. It's the second time I'm trying, but it has somehow become way harder. The first time I installed Windows, everything worked perfectly, untill I noticed that SP2 wasn't installed, and I couldn't install it on my windows, somehow.
Now I'm trying it with a different version of XP (Pro), but Bootcamp is giving issues. I haven't deleted the old volume/partition (don't know the difference) of windows yet, as it is installed on my startup disk and Disk Utility won't delete it .
Ive recently had to repair my startup disc volume/reinstall Tiger and now my iPod doesnt store songs after I sync it. All of my music is in iTunes and everything else seems to be working however once I disconnect my iPod NOTHING is there.
Ive been looking through all the previous discussions but cant seem to fix this on my own. And Im not even sure if I should be posting this question on here or in another forum...because Ive also noticed that there are no pictures in iPhoto .when I did the repair...it asked me if I wanted to save a copy of the previous system which I did.
Info:
PowerBook, Mac OS X (10.4.11)
Running 10.7.4, MacBookPro Mid 2010. Â
After hardware failure (read heads on HD gave out. AppleCare replacement of HD. Third party data recovery and reinstall on my new HD.) I connected new Ext HD for Time Machine, and Time Machine has corrupted my startup volume.Â
Took to the repair shop and they said the Time Machine preferences file was corrupted, which left all my system drive data in a read-only state after backup. They trashed the pref file, and reset the permissions/read-only flags on my startup volume.Â
1) How do I reset the file permissions myself? (so I can nuke my Time Machine backup, manually back everything up, and manually recreate my entire system drive?)
2) Do you think since the data recovery place (Apple Authorized BTW) rewrote all my original data to the new HD, some "random" corruptions were copied over? Or is this a problem with Time Machine? (Which is why I want to do a manual reinstall/restore.)
Info:
MacBook Pro, Mac OS X (10.7.3)
Due to many reasons, I wish to select multiple Finder lines for moving, deleting, etc.How can I select more than one at a time?
Info:
iMac, Mac OS X (10.7.3)
I want to order prints of my images but can only select one at a time? How do I get my computer to let me select several prints to order?
View 2 Replies View RelatedTime Machine no longer works for me. Apparently the volume of stuff it wants to back up is too large for the partition devoted to it (on an external hard drive). But I can't choose the exclude anything because the Options button in Time Machine Prefs is greyed out. I've deleted the TimeMachine .plist file, and restarted, but no go. And I haven't found anything to help either here or on the larger web
Info:
iMac, Mac OS X (10.6.8)
Network diagnostics is asking me to select a location. What is a location? Does it make a difference whether I choose a dated one or automatic? And why is my previous selection lost?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.6.8)
My mouse running out of battery, now i want to select apple menu for shutdown, restart or open any programm with key board, how can I do that?
Info:
iMac, Mac OS X (10.7.2)
I've had an iMac for just about a year and over time I guess I just didn't notice but the machine always ran very quietly. At the same time the back of the computer would heat up so bad that it would nearly burn my hand if I left it there. Well last week I decided to upgrade to Lion from Snow Leopard and when I did the install failed and froze up the hard drive. I took the computer in to the apple store and they determined that it had to have a new hard drive installed because the old one (only a year old) had a physical malfunction (was broke). So anyway I have my iMac back and get it started up, backed up from time machine, and then finally get Lion istalled - and now all of the sudden I notice that the fans in the computer are CONSTANTLY blowing - I can hear them spinning and can hear the air venting out of the back of the computer - and the computer is STILL really hot on the backside of the screen. Â
So now I am wondering if the originial problem was the computer heating up and if that may have broken the otherwise good hard drive? Also now that I have a new hard drive - should I be concerned about the fans being on ALL the time? I mean they never go off. Even when I leave the computer for hours and come back to it and the screen is asleep the fans are STILL buzzing away at top speed. Here is the stats on the computer at the time that I'm typing this note - there are no other programs running than Firefox and Mail. Also - I don't know what the optical drive is exaclty - but if it's the DVD drive (superdrive) - there is nothing in the DVD disc driveÂ
Info:
iMac, Mac OS X (10.7.3)
my 4 year old IMac 2.4ghz intel core 2 duo with 2gb running 10.7.3 has been running really slow since I installed photoshop CS4 and upgraded to lion ( I have 137gb of free space on hard drive) I mean it wont quit out of photoshop I always have to do a force quit and most applications run really slow. Do I need a new computer , what should I go for to have a smooth running mac?Was thinking of a new IMac 27-inch: 2.7GHz with 4gb memory.Â
Info:
iMac (20-inch Mid 2007), Mac OS X (10.7.3)
This started yesterday. Every time I use my notebook the fan is on. What's wrong?
View 7 Replies View Related
