Intel Mac :: Screen Goes Black After Startup But Is Still Running?
Jun 19, 2012
I replaced my hard drvie in my A1208 iMac yesterday, and didn't have the OS disc or a keyboard. After installing the HD, I booted the computer to make sure everything was working. I got the "?" screen, and everything seemend to be working just fine. So today, I picked up a keyboard from the Apple store and dug out the disc After I got back home, I booted the computer to install the OS, and the screen went black a few seconds after the chime and grey screen, but was still running. (I could hear the fan and disc spinning) I've tried to restart, but i'm still having the same problem. I've tried to research other issues, but haven't found anything comparable.
Info:
iMac
View 14 Replies
ADVERTISEMENT
Apr 1, 2012
This 5 year old iMac makes the seek optical drive sound when switched on, but does not chime, but I can hear the hard drive going afterwards.
The screen just stays black, not a flicker.
The problem is that it is located in a small pretty isolated town in NE Brazil, I will be going back out there later in the summer so if anyone has any helpful ideas it would be most welcome. Fortunately we have a full CCC clone of the hard drive and a working MBP so we haven't lost anything, but it would be very good to have it working again.
Does it have a socket for an external monitor, I really cannot remember, as I have not seen it since November, I know the old round iMacs had one.
The nearest Mac store is probably in Rio or Sao Paulo which are a good day travelling by car and plane so there is no chance of getting it there.
Info:
iMac, Mac OS X (10.4.11)
View 3 Replies
View Related
Jun 3, 2014
My imac screen has gone black?
Info:
iMac, OS X Mavericks (10.9.3)
View 2 Replies
View Related
May 5, 2012
The latest iMac model. When I click on the power button: I can hear the Hard disk and the DVD drive spin up. The screen stays black. The startup sounds plays half way through the first time, like its being cut off. After the first startup chime has been cut, the chime keeps playing in a loop. The computer doesn't come any further than that.
I have tried: Unplugging all peripherals, with the same result.
SMC reset: Unplug power cord and hold power button for 5 sec. PRAM reset...
It seems like the computer does not even get to boot and ignores all keyboard input. I also tried booting from the DVD drive with the installation disk. But I can't get any further than the repeating startup chimes.
View 1 Replies
View Related
Apr 5, 2007
My brother's iBook G4 (I think it's a 2003 model) has a problem with the screen. When the computer is turned on, the screen stays black, although the backlight is on (the apple glows). Sometimes, on start up, the screen works normally for a random amount of time before going fuzzy and then black again.
Any ideas on how to fix this? Is it likely to be a problem with the hardware in the actual computer, or just the screen? Or is it a software thing?
View 4 Replies
View Related
Apr 30, 2007
My iBook will not display anything on its screen. Rather, it just remains black. One time, the screen did come on, but then shortly after booting, it flickered a lot and then went black again. A year ago, something similiar happened and when I took it to be serviced (when I had AppleCare), they had to send it away and have a new logic board installed. Now this machine is out of warrenty and and I am not sure what to do, or even if it is the same problem. Any suggestions?? Thanks!
View 1 Replies
View Related
Jun 3, 2014
After an update(I think) I can no longer get into my computer. When turned on I get the apple logo then a grey screen that turns to black but the curser is active . Then there is no more progress to the startup screen
Info:
MacBook Pro, iOS 7.1.1
View 2 Replies
View Related
Mar 23, 2012
Just got my macpro few days ago and black screen shows at start up, sound and keyboard light will turn on Except for the screen. I dont know what to do!
Info:MacBook Pro (15-inch Late 2011)
View 4 Replies
View Related
Sep 28, 2010
I have a Mac Pro (Early 2008) running on 10.5.8 OSX with apple 20" display and 16G RAM.
Initially started with my MACPRO not waking up from sleep and has to force the shut down with power button. Finally realised it was due to my Epson scanner connected via USB...
The main issues now is with the display, black screen on startup. I can still control the volume and disk eject/close, just no display. Force shut down with power button numerous time but futile. Finally solved it with SMC reset.
it becomes an on and off issues... and continuously I solved it with SMC reset.... sometimes needed 2 or 3 resets to get it to work,and finally for the past few days... SMC reset can't solve it either... no display on startup, and same thing I can control the volume and disk eject/close. Have tried my monitor on other mac and it worked fine.
Now this is strange. if I let the mac cool off totally,after a SMC reset. the display will comes up fine...
View 4 Replies
View Related
Oct 19, 2009
Last night I was using my computer all fine. However this morning I turn it up, the white light where you push to open the lid, is on without flashing, and there is a black screen.
Please note that I have not installed any new hardware devices i.e. hard drive, ram, etc.
I tried to push the power button for like 10 seconds straight when I turned on to see if that would fix the problem but no. I can hear the hard drive starting up when I push the power button but black screen.
Could this perhaps be one of those faulty 8800 M GT nvidia gfx?
But I'm scared to take it to Apple because earlier this year, I took it apart and redid the thermal pasting and I kind of have screw drive marks on my keyboard aluminum part... It's like so obvious I opened it before. But, my 1 year coverage is already over so hope that doesn't eliminate me from getting that nvidia service in the case that it is the gfx card hardware problem?
View 4 Replies
View Related
Mar 19, 2012
I have been limping along for quite some time with a recurring problem with my PPC Flat Panel iMac G4.Sometimes when starting up I would get a black screen. The unit chimes at startup but the screen would stay black.I found that I was able to fix (temporary) the problem by removing the bottom plate and pushing the reset button under the base.(After shutting down and unplugging the unit.) after the startup chime, the screen turned gray with a folder icon in the center with a blinking question mark.After shutting down and restarting, this happened again 3 times.On the 4th shutdown/startup it went back to the black screen.Repeated shutdown/restarts have no effect.Shutting down, unplugging the unit and pushing the reset button is also having no effect.I hear the startup chime every time. Black screen every time as well now.Â
Info:
iMac, Mac OS X (10.4.11)
View 2 Replies
View Related
Jun 25, 2014
every morning I turn on my new Macbook Pro the screen stays black. When I move close to the screen I can see the password entering box far away, when I then type it it is booting into Mac OS X but the screen is still off. After some time, the screen blinks a couple of times and then the screen is displayed as it should and I can work all day.Â
I have resetted PRAM and called Apple Care. They made me reinstall OS X mavericks.Can it have something to do with the fact I have FileVault enabled on the disk?
View 1 Replies
View Related
Jul 22, 2010
I just replaced my LCD. It was working fine, but now just stopped working. It's a mid-2009 A1286 15in Macbook Pro.
The computer itself works fine and I tested it using an external monitor. I can FAINTLY make out the display on the screen, so I'm guessing it is a backlight issue? Don't mid-2009 don't have display inverters?
I also tried resetting the pram and SMC.
View 2 Replies
View Related
Mar 8, 2012
I have had to do hard restarts in Lion when it satrts up with a black scren and the mouse pointer and nothing else. It happened most recently today with a scheduled wake up from being asleep. The other day it restarted with the pointer acting as a painting program and actually colored the path of the cursor until it eventually painted in enough of the login window to enter my password and log in... I have reinstalled the os from the App store and it still acts strange some times...
Info:
Mac Pro, Mac OS X (10.7.3), 2007 model, 3 Ghz quad
View 6 Replies
View Related
Feb 3, 2012
Desktop restart shows flickering black/white screen, then black. Could not restart.
Info:
iPad 2, Mac OS X (10.6.6)
View 3 Replies
View Related
Mar 12, 2012
Recently my Mac has been extremely unstable. It keeps freezing up and hanging for no reason. Initially a 3 beep would sound off, I ran some tests like the apple hardware one and realised that one of the rams was bad. I bought 2 new sticks of ram and replaced it. Following which, the mac still freezes up and a 3 beep alarm sounded off again.
Currently, I'm trying to turn it on, no 3 beep signal is sounding off but the Mac either keeps freezing and showing a highly pixelated screen or a black screen surfaces. There is some sound coming off from the laptop as well. Each time I switch on the system, it just shows a black screen with no display.
The Mac is a 15'' 2.66 MHz i7 which was manufactured in the mid 2010s.
The 2 new sticks of ram are Strontium 1066Mhz 4Gb x 2 sticks.
In the initial stages: kernel panics were common as well.
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8)
View 3 Replies
View Related
May 13, 2012
I cant seem to make it shut down completely or re-start, it seems to be in sleep mode and wont wake up. When I try and restart it makes a sound like its trying to eject a disc (there is nothing in the cd drive).
Info:
MacBook Pro (15-inch Early 2008)
View 1 Replies
View Related
Jan 29, 2010
Macbook Air, Rev A. Worked like a charm for 1.5 years.Upgraded to a Rev c SSD and gave the Rev A to the wife.She installed NOTHING.Within a few weeks it started running VERY slow. I'm talking 2 minutes of beach ball per click.I use Disk Utility to check the drive. No problems of any kind.
Rebooting would take -- and I'm not exaggerating -- over an hour. First it would sit with a grey screen for 5 minutes. Then with an apple logo for 10 more. Then with the little spinning circle for 30. Then the desktop background would show up and sit for 20 minutes, etc.
Was gonna upgrade to Snow Leopard so what the heck, backed it all up and installed Snow Leopard. To my surprise, it instaled Snow Leopard on top of the old OS -- it kept all the files around so no need to restore from backup.
Speed problem SOLVED!Then a few weeks later the same problems.This time I check the drive AND run the hardware test. No problems.I ERASED the entire drive. I installed Snow Leopard.All is good for a few weeks.Then the problem came back a 3rd time.
I go to reinstall a 3rd time and Snow Leopard doesn't even acknowledge that there's a hard drive in the machine! And when I look in system profiler it says there's no drive of any sort. Yet it will reboot and run... just VERRRRRYYYY slowly.
I'm ready to replace the drive with a Runcore SSD or some such other device but I want to be sure the problem is the drive and not some other aspect of the hardware (motherboard, RAM, etc.)Anyone ever seen this? Anyone have any ideas as to how to investigate, solve, conquer, save myself from madness??
View 3 Replies
View Related
Apr 25, 2012
I'm running 10.7.3 on an iMac Intel core i7. When I restart and hold Option key, nothing happens. The PRAM shortcut worked, but I cannot for the life of me, get the boot options to appear! Need to boot from external drive.
Info:
iMac, Mac OS X (10.7)
View 7 Replies
View Related
May 17, 2012
How do I get my computer started so I can trouble shoot. Freezes during startup on Firefox begins loading!
Info:
iMac
View 6 Replies
View Related
Jul 3, 2012
New to Mac computers. When trying to open computer after being in sleep mode, I clicked the mouse to open the password screen, & a blank blue/black screen appeared & the mouse timer( colored circle) appeared, as if to be waiting. I had to unplug the computer to reboot it. This has happened twice in 2 days.
Info:
iMac (27-inch Mid 2011)
View 1 Replies
View Related
Jun 10, 2012
How do I change the iTunes screen display from 'white on black' to 'black on white'
Info:
24" iMac
View 3 Replies
View Related
Mar 16, 2012
Ever since I've had my Mac, about three times a day my screen will go completely black after I've moved the cursor very quickly or in a herky-jerky motion. I don't think I'm pressing down on the right or left--it just seems to be some motion.
Info:
MAC 24" 2.66 mgz, Mac OS X (10.5.6)
View 4 Replies
View Related
Mar 20, 2012
So when I try to log in, the screen goes black, after a few seconds, when I move the mouse around, press a few keys on the keyboard, the login screen comes back. But the same thing happens when i try to log in, it just keeps going black.
View 3 Replies
View Related
Aug 10, 2009
This morning, my G4 refused to start up as usual. Instead, I got a grey screen. Here's what I've tried so far and the results: Action: Started from DVD Install disk for Leopard to try an archive and install. Result: No hard drive was recognized for an install, archive and install, or erase and install, i.e., no drives appeared at all in the "Select a Destination" window, just empty white space. Action: Attempted safe boot (Command + Shift + V) Result: Flashing Globe Action: "Repair Disk" from Disk Utilities after starting from DVD Install disk for Leopard.
Result: Received "First Aid Failed" message. Error message read: "Catalog file entry not found for extent. Volume check failed." I can't even get it to eject the install disk (the "eject" key does nothing and there's no manual eject button for this Power Mac). This is a work computer and not having it functional is pretty hobbling so.
View 2 Replies
View Related
Mar 7, 2012
my screen keeps going black randomly but everything in the background is still playing. When i press the power button twice it will go to standby and then turns on again, but the black screen keeps getting more and more frequent. Ive tried resetting the SMC and the command+option + PR thing but nothing has worked.
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Mar 17, 2012
problem of getting black screen on imac running 10.6.8?
Info:
iMac (27-inch Mid 2010), Mac OS X (10.6.8)
View 1 Replies
View Related
Mar 23, 2012
Lately, as of two days ago. My iMac has been freezing and the screen just goes either black or another color that's on the screen. I was doing a conference call today, when my screen went black and I couldn't get the picture back. The audio ect worked fine, but the screen on my side went black. The computer has been freezing a lot since I upgraded the lion OS to the latest one. It runs faster, but freezes too much.
Info:Imac Intel duo, Mac OS X (10.7), 2 GB Memory
View 2 Replies
View Related
Mar 25, 2012
Sometimes, when my iMac has been "resting" and I then move the cursor using track pad I get a stream of black squares on the screen. The more I move the cursor the more black squares I get. If I switch off and then on the screen is ok. This is an intermittent occurrence.
Info:
iMac, Mac OS X (10.7.1)
View 2 Replies
View Related
Apr 9, 2012
Why does imac screen turn black?
Info:
Imac, Mac OS X (10.6.5)
View 2 Replies
View Related
