Hardware :: Using Canon Pixma MX850 Office All-In-One Printer With A Mac
Jan 9, 2009
I was looking to buy a printer. I already have a Epson Perfection Scanner ( its not the best but does the job)
Canon Pixma MX850 Office All-In-One Printer (2436B002) apparently is listed in Mac World as one of the top products in their most recent issue. I was hoping some real world people may advise me on whether its a good purchase. If you have one or know someone who does or know of a better printer post a reply.
I'm not looking to spend more than $200 on a printer. I'm also a designer so I'm looking for one that prints graphic design work decently. I have an old G5 tower and my new 13" white mackbook that I want it to work with too.
View 2 Replies
ADVERTISEMENT
May 7, 2009
I'n not sure anyone uses either printer on this forum, but I figured I ask anyways.
I'm in need a of a new printer, I have the discontinued kodak 1400 dye-sub printer which I'm looking to replace. Long story short, I'm down to two printers:The HP 8850 and the Canon pro9000 (the older model or the MKII)I've heard complaints of HP's drivers/quality/tech support lately but in the past I've been a satisfied customer. I never owned/used a canon so I have nothing to judge them on.So, I'm fishing for advice, in general on HP vs. Canon (especially for the mac related drivers/support) and specifically if anyone has any advice or insight on either of these two printers.
View 2 Replies
View Related
May 3, 2012
I have just connected my Canon Pixma MG5270 to my iMac running OSX 10.7.3 via WiFi. Printing works great, and scanning from the desktop "Canon MP Navigator EX - MG 5200 series" V 4.0.3 application works like a dream. When I try to scan via the operations panel on the printer/scanner the following comes up - Set the PC to start scanning". This worked fine when connected directly via USB cable. I have searched the web and believe I have the correct settings, particuliarly in MP Navigator:Â
1. Main Menu -> One-click -> Start scanning by clicking the button (checked)
2. Main Menu -> One-click -> Preferences -> General -> Compress scanned images when transferring (checked) -> Change -> Network Device List (selected Canon MG 5200 series_xxxxxxxxx) -> Scan-from-Operation-Panel Settings -> Network Device List (selected Canon MG5200 series_xxxxxxx)Â I have restarted the iMac and printer and always with the same result.Â
Info:
iMac (21.5-inch Mid 2011)
View 6 Replies
View Related
Dec 3, 2014
Upgrade to Yosemite 10.10.1 caused my Canon Pixma ip8500 printer to stop working. Canon no longer supporting this printer.
Info:
iMac with Retina 5K display, OS X Yosemite (10.10.1)
View 3 Replies
View Related
Dec 10, 2014
I would like to use a perfectly good Canon Pixma ip4200 printer with OSX Mountain Lion 10.8.5 and  Yosemite 10.10.1 on my 2013 model iMac but Canon say they do not do a driver for these more recent versions of OSX later than 10.7. Is there any way to get this to work?
View 1 Replies
View Related
Feb 27, 2009
OK, it seems that the only alternative to a huge Samsung duplex laser would be one of these printers.
But as it doesn't duplex for fax, the workaround would be to duplex scan and then send the fax from the computer.
Or as a last resort, fax from memory card or USB stick. Is it even possible to do that?
View 3 Replies
View Related
Jan 17, 2009
Okay, new multifunction. My fiance set up the network, and I can print wirelessly. No problem. He has put it in my hands to set up the scanner function. Problems. When I connect my computer by ethernet cable to the router (also connected to the MX850), everything works as it should. When I disconnect the ethernet, the scanner doesn't recognize my computer, and the computer says that the scanner is not connected. Am I wrong in thinking that the scanner should scan wirelessly?
View 4 Replies
View Related
Jun 6, 2012
I am new to Mac. Recently I bought a Macbook Air with OS X v10.7. I have a ADSL router with the Canon printer with fixed IP 192.168.2.100. I have a wireless router connected to the ADSL router. This wirless rouer is in another subnet 192.168.3.0.My Windows 7 notebook I am able to print wirelessly to the Canon using a manual configuration (IP printing). As for the Mac, I have installed the latest Canon CUPS drivers and the Canon IJ Network Tool. I use the Canon IJ Network tool, I am not able to scan for the printer. I configure manually with the IP address such as IPP://192.168.2.100 but it still cannot print. The status of printer goes from idle to busy.
Info:
MacBook Air, Mac OS X (10.7.4)
View 3 Replies
View Related
May 8, 2012
I am unable to set up our office Canon image Runner 3225 (iR3225) network printer up. I have followed the steps on both the canon, and apple site. I have also tried driver UFR II (2.24), and other drivers as well. I can look at the printer online but it will not locate it in setup no matter what I do.
I am running OS X Lion 10.7.3
View 13 Replies
View Related
Jan 17, 2009
I recently purchased a brand new iP4500 and afer installing the latest drivers and setting up everything I cannot print..
The test prints come out OK (thus, the printer connection is good and working). Tried evrything, even tried printing from the root user. I spent 45 minutes with Canon Tech Support and they basically said "There's a problem with your system not spooling properly, and there's nothing else we can do from here, go to Apple"
Now here's the deal, I have two iMacs (one g5, one Intel, both with 10.5.6 but otherwise differently configurated) And I get the same error in BOTH.
Is there anything I could be doing wrong?
Can I have any suggestions to get this going?
View 2 Replies
View Related
Jul 9, 2009
I got a this printer from the free printer with new mac special and bought a class 1 bluetooth dongle from ebay.I connected it to the printer and opened the bluetooth set-up assistant and it recognized it by its name and model number. I set it up and everything appeared to be working normally but when i try to print i get the 306 error. does anyone know what to do?
View 2 Replies
View Related
Feb 21, 2012
I have a Canon Pixma MP780 and want to know if I can set it up to print wirelessly from my Macbook Pro.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 2 Replies
View Related
May 16, 2012
Trying to scan a sheet to my MacBook Air running Lion, but whenever I open the scanner from the System Preferences, it just stays like this and nothing happens. Reading around, it appears that you can't use the MX350 scanner over WiFi using Lion. It works perfectly on my iMac running Snow Leopard 10.6.8 but unfortunately I can't use that right now.
I've tried inserting a USB stick formatted with Mac OS (Journaled) and it doesn't want to do anything, I've tried installing multiple scanner drivers from the Canon website, I've also tried to do a software update. I'm running Mac OSX Lion 10.7.4 and have a Netgear router supplied by Virgin Media. It prints perfectly fine from the MacBook Air.
Info:
MacBook Air, Mac OS X (10.7.2), 2011, 11", 1.6GHz, 4GB RAM, 128GB
View 7 Replies
View Related
Nov 13, 2007
Brand new iMac (my first one), sitting next to my Sony XP computer. I have a wireless network and have been able to share files between the two computers. I have all of my work information on my PC and am wanting to print to my new Canon Pixma printer which is connected to the MAC. I can "see" the printer when I go to printing preferences on my PC but when I hit print, I get an error message that says the printer if offline. I have all sharing enabled on both computers and when I go into the print queue, there is a document that is in there that it won't allow me to delete because it was "sent" by the owner "Valerie"....not sure if that is part of it or not. I guess my first question is, can I print over my wireless network through my MAC to the Canon and if I can, any idea what could be impeding me from printing?
View 3 Replies
View Related
Jun 3, 2008
so I bought a super awesome easy to use ink refill kit for my Canon Pixma MP150. The cartridge refilled fine, but the printer is being cranky and won't let me print because it still thinks the ink is low.
As some of you may know, most printers monitor your ink level, but they usually simply estimate the remaining ink based on how much ink the printer things it has used up in printing. It has no idea how much ink is actually left in the tank... and will still think it's low if you refill the cartridge.
My printer, however, doesn't let me print now that it thinks my refilled cartridge is low.
According to canon's website, i'm SUPPOSED to get an error message on my screen asking if I want to continue printing anyway... but I don't, and their support hasn't been very helpful.
I don't get ANY error message at all. The Printer Setup Utility simply stops all print jobs for that printer without any explanation. I've figured out through experience in the past that this is always solved by replacing a low ink cartridge. It's a pretty stupid system cause it doesn't even tell me that's why it won't print... but every time I try to resume the print jobs it immediately stops them again.
Do you guys have any tips on how I can turn off the ink level monitor on the printer, or on how I can force it to print anyway.
Do you guys think that maybe Gimp-Print drivers would let me bypass the ink monitoring? If I do that, then will gimp-print still give me full control over the printer (i.e. will I still be able to clean the nozzles and stuff using gimp-print drivers?)
View 11 Replies
View Related
Apr 19, 2009
OK so i currently bought a brand new 24" imac and am trying to print from my MP610.The printer is running off a wireless network and i have no trouble finding or connecting to it.I downloaded the most recent drivers from the canon website,( 6.9.3) and installed them. However the problem is i cant seem to find them anywhere in the computer. The driver does not show up in the selected driver list, and i can't see to find it manually either.
View 3 Replies
View Related
Jun 11, 2009
I have just set up a Canon Pixma MP620 to work wirelessly over wifi on my network. The printer works fine when it is right next to the router (a Netgear). However, when I move the printer to another room away from the router, the signal strength goes to nothing/unstable and I cannot print wirelessly. My MacBook retains full wifi signal strength in this same room so the router coverage would appear to be okay.
Is there anyone using this printer over wifi where the printer is in a different room to the access point/router? Is there something wrong with my printer?
View 2 Replies
View Related
Jul 4, 2012
My macbook pro is no longer recognizing the scanning function of my Canon pixma 860. It comes up as a printer, but not a scanner. I have the latest software updates installed?
View 1 Replies
View Related
Feb 27, 2009
My current setup is an AirPort express with a PIXMA iP8500, if I grabbed a LaserJet 1020, could I plug a USB hub in the AirPort Express, and network them both at once?
View 1 Replies
View Related
Oct 10, 2008
I invested in the Canon PIXMA MP610 to go with my new iMAC but can't get the printer properties feature to work. There is a multi-tab dialogue box in Windows with all sorts of useful features e.g. print quality, paper type & size, watermarks etc so I presume I should be getting something similar on my MAC? Have downloaded all latest drivers from Canon siteI'm new to MACs having only just moved away from Windows, so I may be doing something really stupid!
View 15 Replies
View Related
Apr 1, 2012
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
View 1 Replies
View Related
Aug 22, 2009
I have 2 new I-Mac computers set up on a home network. I have my new Canon D480 Multifunction printer connected to one of the Macs ("Mac #1) by USB and it prints perfectly with the driver recommended in the printer manual downloaded from the Canon site. I have Printer sharing turned on. The printer's name on Mac #1 is Canon D460-490 (UFRII LT) which is the name that was automatically given to the printer when I downloaded the drivers and installed them.
However I am unable to print to the printer from the second new Mac ("Mac #2") although I have downloaded the same printer driver and have added the printer on Mac #2. The printer's name on Mac #2 is Canon D460-490 (UFRII LT) @ Mac #1.I go through the motions of File, Print, but nothing happens.
View 2 Replies
View Related
Sep 23, 2007
I'm using an sr mbp and I'm typing up a lot of notes for a class with mac office. In order to save paper I want to do duplex prints but I can't seem to find the option in page setup. How do I get to this feature?
View 6 Replies
View Related
Mar 28, 2012
Microsoft Office. Epson Scan, Canon software won't work with Lion OS
Info:
iMovie '11, Mac OS X (10.6.8)
View 1 Replies
View Related
Apr 20, 2010
I am using a Canon MP620 all in one with my MacPowerbook running Leopard 10.5.8. My Canon software is MP Navigator 1.05. The printer is agonizely slow. Sometimes after I press the print button it can take over a minute to even start. This not only occurs when I first start up but after the printer has been in use. This occurs when printing black and white text or pictures. I have been going through a hub and have not yet tried a direct connect which I will shortly. Anyone got any ideas or is this just a slow printer?
View 2 Replies
View Related
Dec 13, 2010
Problem: Canon MP560 printer won't print from 2008 Macbook Pro 10.6.5. It is recognized, I can print a sample page from the printer utility, but InDesign CS5, Acrobat Pro, Word 2011, text edit, Firefox, etc won't print to it. I'm not sure what caused this to start happening, as I've had this printer for almost a year. It is recognized on both USB and WIFI, yet neither connection works.
View 1 Replies
View Related
Sep 3, 2009
Has anyone got a work around for the Canon IPF500 printer.
I need to get this working, but waiting for new driver to be released from Canon.
Anyone know any temporary fixes?
View 2 Replies
View Related
Mar 7, 2010
After hours on the phone with Canon support, they told me it was a MAC problem. I have a new Canon Pixma MX860 printer..
First , Downloaded drivers from the Canon website with their support phone person helping set it up. Printer worked wirelessly with the MAC for 2 days. Then gone. Printer no longer on printer list and won't print either by USB or wirelessly. Called Canon support.
He guided me thru reinstalling in different ways, repaired permissions, set up additional acct name, but still the printer in not listed on Printer Browser screen when wireless used (it is listed when USB connected, but cannot print)and not listed at all on Print & Fax screen. My MAC doesn't recognize the printer now. What happened?
Here today , gone tomorrow. And nothing was downloaded , updated, or anything added or done to the computer from one day to the next. It is a huge mystery.
Did a disk utility 1st aid days before...nothing needed repair...Did the 1st aid, due to slowness starting, downloading from cameras very slow, and message "start up disk is almost full", which it is NOT ...46GB available.
View 3 Replies
View Related
Apr 25, 2010
I can print wireless but I can not scan wireless. Why? I am connected by wire from the canon 490 direct to my airport so why is it the scanner will not work? Can anyone explain ?
View 4 Replies
View Related
Sep 25, 2009
I've downloaded the Canon drivers to my MacBook. Now what? How do I actually install the particular printer so that it shows up on a print menu?
View 5 Replies
View Related
