I got a this printer from the free printer with new mac special and bought a class 1 bluetooth dongle from ebay.I connected it to the printer and opened the bluetooth set-up assistant and it recognized it by its name and model number. I set it up and everything appeared to be working normally but when i try to print i get the 306 error. does anyone know what to do?
View 2 RepliesBrand new iMac (my first one), sitting next to my Sony XP computer. I have a wireless network and have been able to share files between the two computers. I have all of my work information on my PC and am wanting to print to my new Canon Pixma printer which is connected to the MAC. I can "see" the printer when I go to printing preferences on my PC but when I hit print, I get an error message that says the printer if offline. I have all sharing enabled on both computers and when I go into the print queue, there is a document that is in there that it won't allow me to delete because it was "sent" by the owner "Valerie"....not sure if that is part of it or not. I guess my first question is, can I print over my wireless network through my MAC to the Canon and if I can, any idea what could be impeding me from printing?
View 3 Replies View RelatedI have a Canon Pixma MP780 and want to know if I can set it up to print wirelessly from my Macbook Pro.
Info:
MacBook Pro, Mac OS X (10.6.8)
My macbook pro is no longer recognizing the scanning function of my Canon pixma 860. It comes up as a printer, but not a scanner. I have the latest software updates installed?
View 1 Replies View RelatedI recently purchased a brand new iP4500 and afer installing the latest drivers and setting up everything I cannot print..
The test prints come out OK (thus, the printer connection is good and working). Tried evrything, even tried printing from the root user. I spent 45 minutes with Canon Tech Support and they basically said "There's a problem with your system not spooling properly, and there's nothing else we can do from here, go to Apple"
Now here's the deal, I have two iMacs (one g5, one Intel, both with 10.5.6 but otherwise differently configurated) And I get the same error in BOTH.
Is there anything I could be doing wrong?
Can I have any suggestions to get this going?
I was looking to buy a printer. I already have a Epson Perfection Scanner ( its not the best but does the job)
Canon Pixma MX850 Office All-In-One Printer (2436B002) apparently is listed in Mac World as one of the top products in their most recent issue. I was hoping some real world people may advise me on whether its a good purchase. If you have one or know someone who does or know of a better printer post a reply.
I'm not looking to spend more than $200 on a printer. I'm also a designer so I'm looking for one that prints graphic design work decently. I have an old G5 tower and my new 13" white mackbook that I want it to work with too.
Trying to scan a sheet to my MacBook Air running Lion, but whenever I open the scanner from the System Preferences, it just stays like this and nothing happens. Reading around, it appears that you can't use the MX350 scanner over WiFi using Lion. It works perfectly on my iMac running Snow Leopard 10.6.8 but unfortunately I can't use that right now.
I've tried inserting a USB stick formatted with Mac OS (Journaled) and it doesn't want to do anything, I've tried installing multiple scanner drivers from the Canon website, I've also tried to do a software update. I'm running Mac OSX Lion 10.7.4 and have a Netgear router supplied by Virgin Media. It prints perfectly fine from the MacBook Air.
Info:
MacBook Air, Mac OS X (10.7.2), 2011, 11", 1.6GHz, 4GB RAM, 128GB
so I bought a super awesome easy to use ink refill kit for my Canon Pixma MP150. The cartridge refilled fine, but the printer is being cranky and won't let me print because it still thinks the ink is low.
As some of you may know, most printers monitor your ink level, but they usually simply estimate the remaining ink based on how much ink the printer things it has used up in printing. It has no idea how much ink is actually left in the tank... and will still think it's low if you refill the cartridge.
My printer, however, doesn't let me print now that it thinks my refilled cartridge is low.
According to canon's website, i'm SUPPOSED to get an error message on my screen asking if I want to continue printing anyway... but I don't, and their support hasn't been very helpful.
I don't get ANY error message at all. The Printer Setup Utility simply stops all print jobs for that printer without any explanation. I've figured out through experience in the past that this is always solved by replacing a low ink cartridge. It's a pretty stupid system cause it doesn't even tell me that's why it won't print... but every time I try to resume the print jobs it immediately stops them again.
Do you guys have any tips on how I can turn off the ink level monitor on the printer, or on how I can force it to print anyway.
Do you guys think that maybe Gimp-Print drivers would let me bypass the ink monitoring? If I do that, then will gimp-print still give me full control over the printer (i.e. will I still be able to clean the nozzles and stuff using gimp-print drivers?)
OK so i currently bought a brand new 24" imac and am trying to print from my MP610.The printer is running off a wireless network and i have no trouble finding or connecting to it.I downloaded the most recent drivers from the canon website,( 6.9.3) and installed them. However the problem is i cant seem to find them anywhere in the computer. The driver does not show up in the selected driver list, and i can't see to find it manually either.
View 3 Replies View RelatedI'n not sure anyone uses either printer on this forum, but I figured I ask anyways.
I'm in need a of a new printer, I have the discontinued kodak 1400 dye-sub printer which I'm looking to replace. Long story short, I'm down to two printers:The HP 8850 and the Canon pro9000 (the older model or the MKII)I've heard complaints of HP's drivers/quality/tech support lately but in the past I've been a satisfied customer. I never owned/used a canon so I have nothing to judge them on.So, I'm fishing for advice, in general on HP vs. Canon (especially for the mac related drivers/support) and specifically if anyone has any advice or insight on either of these two printers.
I have just set up a Canon Pixma MP620 to work wirelessly over wifi on my network. The printer works fine when it is right next to the router (a Netgear). However, when I move the printer to another room away from the router, the signal strength goes to nothing/unstable and I cannot print wirelessly. My MacBook retains full wifi signal strength in this same room so the router coverage would appear to be okay.
Is there anyone using this printer over wifi where the printer is in a different room to the access point/router? Is there something wrong with my printer?
I have just connected my Canon Pixma MG5270 to my iMac running OSX 10.7.3 via WiFi. Printing works great, and scanning from the desktop "Canon MP Navigator EX - MG 5200 series" V 4.0.3 application works like a dream. When I try to scan via the operations panel on the printer/scanner the following comes up - Set the PC to start scanning". This worked fine when connected directly via USB cable. I have searched the web and believe I have the correct settings, particuliarly in MP Navigator:Â
1. Main Menu -> One-click -> Start scanning by clicking the button (checked)
2. Main Menu -> One-click -> Preferences -> General -> Compress scanned images when transferring (checked) -> Change -> Network Device List (selected Canon MG 5200 series_xxxxxxxxx) -> Scan-from-Operation-Panel Settings -> Network Device List (selected Canon MG5200 series_xxxxxxx)Â I have restarted the iMac and printer and always with the same result.Â
Info:
iMac (21.5-inch Mid 2011)
Upgrade to Yosemite 10.10.1 caused my Canon Pixma ip8500 printer to stop working. Canon no longer supporting this printer.
Info:
iMac with Retina 5K display, OS X Yosemite (10.10.1)
My current setup is an AirPort express with a PIXMA iP8500, if I grabbed a LaserJet 1020, could I plug a USB hub in the AirPort Express, and network them both at once?
View 1 Replies View RelatedI would like to use a perfectly good Canon Pixma ip4200 printer with OSX Mountain Lion 10.8.5 and  Yosemite 10.10.1 on my 2013 model iMac but Canon say they do not do a driver for these more recent versions of OSX later than 10.7. Is there any way to get this to work?
View 1 Replies View RelatedI'm currently running OSX 10.9.5 on a mid-2013 MacBook Air and have hooked it up to a Canon Pixma MP230 3-in-1 printer. This printer has a built-in manual two-sided printing function, where the user flips the pages for the printer to print on both sides. This feature was working great right about until a few months ago, and suddenly the option is no longer showing up when I attempt to print out of Google Chrome, nor is it available when I try to print using the personalised printer dialog. Â
My current printer driver is 11.7.1.0, which came out in Sept 2014. I don't know how to downgrade to an older driver (I have tried several times!).Â
The option for two-sided printing is simply greyed out on the printer dialog, and there is no option to turn it on in the printer setting (no driver tab). Â
See what I mean with the images below:Â
I've searched far and wide on the internet on how to remedy this, but as I stated above, I don't have a driver tab on my printer setting, so this cannot be simply "turned on" somewhere in the settings, because I did nothing to "turn it off" in the first place. Note: other printers display a two-sided printing option on my laptop, so it's this particular printer and driver that are the issue. Â
Info:
MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.5)
I have a Canon mp450 multifunction printer attched to my windows machine. I have shared the printer to my wireless network and my other windows machines can print to it with no problem at all but... Both of my macs will not print to it. I have tried to go through the printer setup wizard but it doesnt find my printer under default browser. So I searched for it under my network and found it and added it but the printer still doesnt print. I am brand new to mac but I am loving it other then this one issue.
View 1 Replies View RelatedToday, I purchased a Canon Pixma MX350 printer, which is capable of automatic duplex printing. However, when I go to Print in Word, the 'Two-Sided Option' in the 'Layout' menu is greyed-out. Having spent a lot of time Googling and found several similar posts (but not for this exact printer), I understand that this is normal for a Canon printer, but that I should instead have a menu that says 'Duplex Printing & Margin', under which I can select duplex printing. However, I can't find any such menu and can't think of any other way to get duplex printing. The Canon driver I originally had (which comes from the CD provided) was 10.29.0.0. I found a newer one, 10.30.3.0, on the Canon website and installed it, but it didn't fix the problem. I'm running Mac OS X 10.5.8.
Since my main reason for buying this printer was because I need auto duplex printing.
I recently bought a Macbook (the new one with the white unibody) running Snow Leopard. I also bought an airport extreme base station to run my external harddrive and to print wirelessly. My problem is that I can't seem to add the wireless printer to the printers list. Each time I try, the computer recognizes the printer on the network but I can't select drivers for it in the 'Print Using' menu. I already have the printer drivers on the computer (I got a link from Canon customer service and downloaded the CAPT driver installer)
View 6 Replies View RelatedI'm using an sr mbp and I'm typing up a lot of notes for a class with mac office. In order to save paper I want to do duplex prints but I can't seem to find the option in page setup. How do I get to this feature?
View 6 Replies View RelatedI've converted from Vista to the new Macbook and have run in to a problem with my printer (Canon MP610). One of the functions I used often in Vista was the double sided printing function. After installing the latest Mac drivers from Canon's American homepage I get a lot of printing options on my mac, but under layout the double sided printing option is marked grey and I'm unable choose this option.
Have anybody noticed something similar using a canon printer? Any ideas concerning how to fix this?
I'm currently running 10.6.1 and trying to double print using my Canon ip3000 printer, but that option is greyed out.
I've never used this function before and really would like to use it.
My printer (Canon Pixma 9500 Mark II) overides margins set in Aperture panel when printing 13x19.
View 1 Replies View RelatedI am new to Mac. Recently I bought a Macbook Air with OS X v10.7. I have a ADSL router with the Canon printer with fixed IP 192.168.2.100. I have a wireless router connected to the ADSL router. This wirless rouer is in another subnet 192.168.3.0.My Windows 7 notebook I am able to print wirelessly to the Canon using a manual configuration (IP printing). As for the Mac, I have installed the latest Canon CUPS drivers and the Canon IJ Network Tool. I use the Canon IJ Network tool, I am not able to scan for the printer. I configure manually with the IP address such as IPP://192.168.2.100 but it still cannot print. The status of printer goes from idle to busy.
Info:
MacBook Air, Mac OS X (10.7.4)
I've been having a pretty annoying problem with my Canon i560: When printing black text, instead of using the black ink, the printer mixes black from the color inks. This has been a problem for a little while but recently, the colors got a little offset so it became really obvious. Also, I just received an update for the Canon printer drivers and according to the Apple page, the Canon i560 is supported and the drivers are actually updated I'm pretty sure that it's a driver problem because I can print from a Windows virtual machine to the exactly same printer all other variables remaining the same - and guess what: When printing from Windows, black is black, colors are colors, as one would expect with this kind of printer.
Info:
Mac Pro, Mac OS X (10.7.4)
I have a Canon MP830 all-in-one unit. When connected to a Windows 2000 PC or when connected to a MacOS X 10.4 machine, it worked fine. Under 10.5 Leopard and now 10.6 Snow Leopard, there is a long delay between pages when printing even simple text documents. The delay can be anywhere from 20 seconds to more than a minute. Scanning works just fine, the problem is only with printing. Unit is connected via USB, and I've tried it in different ports just in case of a bad port. I have tried both Canon's own printer drivers and the Apple drivers from 10.6 Snow Leopard. I have a 2006 Mac Pro 4x2.66 GHz with 5GB of RAM. It's the same machine which ran 10.4 Tiger without this issue, and I'm currently on 10.6.2.
View 1 Replies View RelatedI just picked up a Canon mp500 printer. It is Bluetooth enabled. Canon has a Bluetooth adapter (extra purchase) that plugs into the USB port. Is there any reason why a non-Canon Bluetooth adapter won�t work?
View 24 Replies View RelatedI think this is a simple question, but I don't understand the technology here... I have a Mac and this HP 8250 printer: [URL] The specs from the previous link show the wireless specs to be: Wireless capability: Optional, with HP bt450 Bluetooth Wireless Printer Adapter, HP bt300 Bluetooth Wireless Printer Adapter.............
View 1 Replies View RelatedI bought a Canon MX870 printer. It works great via wireless, however after say, 5 or 6 pages or print jobs, it "pauses" and stops printing. I go into the print menu on System preferences to resume printing, but this does nothing. Rebooting the router usually does the trick, and printing will resume shortly after doing that. I emailed Canon and they said to assign a static IP for the printer. I have a Belkin router, and I cannot figure out how to do this.
View 1 Replies View RelatedI have a bluetooth mouse and keyboard that I want to share between a PC and MBP via a DVI/USB KVM switch. I think I can do this by plugging a USB Bluetooth dongle into the KVM's USB input.
If I use the MBP's built-in bluetooth then when I switch from one computer to the other via the KVM, the keyboard and mouse will stay paired with the MBP; but if I disable the built-in hardware then the dongle can provide the bluetooth capability and be switched between the computers.
