Hardware :: Remove The Display Stand From The New IMac?
Jan 17, 2010Is it possible to remove the display stand from the new iMac, if so how, is special equipment required.
View 4 Replies
ADVERTISEMENT
Intel Mac :: Remove Stand From It?
May 16, 2012I have a 21.5 in. Mid-2011 iMac, and I just wanted to know if it is possible to remove the stand and replace it with a wall mount of some sort.
Info:iMac
Intel Mac :: Remove The Stand From 24' Model ( A1225)
Mar 24, 2012I am moving my imac 24' from Europe to the states in my baggage. The stand mustbe removed to fit it in. Some models allow a business card or credit card to insert in the lever of the stand and the back of the imac housing where the stand is attached to. Thus oin pulling the stand levekl down with the acard inserted you will see a few srerws to unscrew to removing the stand. This is not with this imac 24' intel model number (A1225)
Info:
iMac, Mac OS X (10.6.8), Remove Stand on model (A1225)
IMac (Intel) :: How To Remove Favorites Display On Search Bar
Dec 5, 2014I Do Not care for this huge box that pops up now when I do a search on Safari. I wish they would not have added this lame duck that always seems to be in the way. How to get rid of this albatross?
Info:
iMac, 10.10.1
IMac :: Finding A Stand For My 27 Inch?
Sep 21, 2010I'm looking for a stand specifically designed for an iMac. Does anyone know where I can find one? I think I need something around 3-5 inches higher?
View 1 Replies View RelatedIMac :: Built In Speakers Or Stand Alone - Better One?
May 17, 2009Which speakers are better, the ones that come built-in on the '09 24" iMac or Logitech X230? I'm not sure what the iMac's speaker stats are, but here are the stats for x230's:
# Total RMS power: 32 W RMS
Satellites: 12 W RMS (6 W x 2)
Subwoofer: 20 W RMS
# Total peak power: 64 W
# Frequency response: 40Hz - 20kHz
# Drivers:
Satellites: (2) 2" drivers per satellite
Subwoofer: 5.25" ported driver
# Speaker dimensions (H x W x D, cm):
Satellites: 20.3 X 6.4 X 7.6
Subwoofer: 22.9 x 15.2 x23.5
# Signal-to-noise ratio: >96dB
Reason I ask is that I have the x230's and they're considered as cheap speakers, so I don't know if I should use them with the iMac or not. The one advantage I see them having over the iMac's is that they have a 20w subwoofer, but I don't know if the satellites are better or not.
IMac :: Actual Size Of The 27'' Stand?
Oct 21, 2009I mean when it is upright on a desk, not just length measurements for the screen. I am afraid that the 27'' might have put my current desk out of commission
..or at least the shelf on top that stabilizes it.
IMac :: Removing 27" Stand?
Dec 13, 2009Are there instructions anywhere as to how to remove the 27" iMac from the stand holding it up? I want to transport it without the stand attached and reattach it. Do I need any special tools? Can't find anything via google or other forums on exactly how to do this. It can't be too hard being that the Vesa mount is suppose to be easy to put on.
View 5 Replies View RelatedMacBook Pro :: Finding MBP IMac Stand?
Apr 5, 2010Looking for a stand, and I have a certain one that I can't find anywhere on the internet anymore even though I remember seeing it. It's a stand for the MBP that looks almost identical to the iMac and 24'' ACD stand. Is there a link or anything?
View 4 Replies View RelatedIMac :: Anyone Noticed New Triangle Shape Stand
Mar 3, 2009It's like the LED Cinema Display, it's more of a Triangle shape than the old ones. I know it's a really small thing but it makes it look much better.
View 5 Replies View RelatedIMac :: Weight Of The 27" Built-in Stand By Itself?
Oct 28, 2009This post is a follow-up question to my earlier post, Best Arm Options For New 27" iMac...
(A) Does anyone know what the weight of the stand that comes with one of the new 27" iMac weighs alone?
(B) If not, is there anyone who (i) has removed their stand and has it at hand, and (ii) has a functioning weighing device available for use?
(C) if neither, thanks for reading, and goodnight!
IMac :: Finding The Slimkey Stand From Macessity?
Nov 12, 2009Just wondering if anyone owns the slimkey iMac stand from macessity this or a similar model?
I'm just wondering if the stand is high and wide enough to accomodate the magic mouse next to the wireless keyboard, as this will really help to keep my desk tidy when i'm not using my iMac.
IMac :: Exact Dimensions Of 27" Without Stand?
Nov 28, 2009does anyone know the exact dimensions of the new 27" iMac without the stand attached? The depth would be nice too...
View 3 Replies View RelatedIMac :: Torx Size 27" Stand
Aug 15, 2010Can anyone tell me the torx size of the stand of the iMac 27"?
I need to remove the stand to transport the iMac (plane). What's the correct torx wrech to use?
Mac Mini :: Display Only Showing 1024*768 Resolution / Unable To Remove Vga Display App
Aug 28, 2009my late 09 mac mini is showing a 3rd display called vga display and when i mirror it only lets me have 1024*768 i was wondering how can i get rid of it i am thinking it came from an app for my ipod touch that lets u have a part of ur macs display on it but i cant get rid of it of the vga still even after i removed the app
View 4 Replies View RelatedHardware :: Keyboard Bottom Stand Uneven On New IMac
Aug 24, 2010I just received my new IMac and was starting to do some typing for a school project when I noticed that the keyboard bottom stand was uneven so whenever I type it bounces much like a chair with uneven legs. I was wondering what to do because now I have to stick a credit card underneath it to keep it from moving.
View 3 Replies View RelatedMacBook Pro :: Display Disassemble - How To Remove Display Casing
May 20, 2010If there's a thread on this, feel free to close this one, but I searched and couldn't find anything. I need a guide on how to remove the display casing on a unibody MBP with an anti glare screen. Specifically, how to remove the actual top shell, where the Apple logo is. The LCD panel itself, I don't need to take apart. Is this possible? If someone has a link to a guide, that would be awesome.
View 4 Replies View RelatedPowerPC :: Old G4 - Remove Lid / Display From Hinges?
Apr 29, 2009I have an old PowerBook G4 (15" alum) that has a dodgy screen that I want to replace. I have another old (non-working) PBG4 and so I want to replace the bad screen with the one from the non-working machine. However, all the instructions that I have found online involve complete disassembly of the whole thing in order to take the actual LCD screen out of the display casing or lid. Is there a way of just disconnecting the entire "lid+screen" at the hinges and then putting on a new "lid+screen"?
View 3 Replies View RelatedMacBook Pro :: Remove A Scratch From Its Display?
Jun 12, 2012My friend has the MacBook Pro 13" and may be I'll buy that MacBook. But there is one little Problem.He has a scracht on the display. It is about 2cm long and circa 0,5mm deep.Is it possible to remove that scratch?Or do I have to change the complete display-glass?
Info:MacBookPro, 13"
MacBook Pro :: Necessary To Remove External Display In Sleep Mode?
Jun 11, 2010I have just seen another thread here which links to the following Apple KB article about running in clamshell mode. [URL]. It says something about putting your laptop to sleep before removing the external monitor. I am not running in clamshell mode but I have a dual screen setup using a Mini DisplayPort to VGA adapter. When I take my MBP (2010 - see sig) off my desk, do I need to put it to sleep to remove the Mini DisplayPort connector, and, if so, does anyone know why this is necessary?
View 3 Replies View RelatedIMac :: 27" Doesn't Display Full Resolution On Apple Cinema Display?
Dec 24, 2009The title says it all really... Quite a simple problem that I can't find any answer to!
I've hooked up my 30" Apple Cinema Display to the new iMac 27" and the highest resolution I'm getting as an option is 1280x800... The iMac correctly detects the ACD as a Cinema HD display but limits my resolution. Why oh why?!
MacBook Pro :: Remove Page Number From Full Screen Display With Preview?
May 13, 2012The full screen mode of Preview always shows a small grey bubble on the botton of the screen that indicates the page number. I would like to remove this page numbering. Is that possible? Since the page numbers are not on the pdf itsself but created by Preview I could not find how to remove them. I added a screen shot to indicate which page numbering I mean.
Info:MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
IMac :: 24" With ATI Radion HD 4850 Display/fixing Late Display?
Sep 22, 2009i am having a weird problem with my brand new imac.. I bought it custom made last friday with ATI Radeon HD 4850. Now here is my issue.. Every time i boot up it takes a while for the screen to turn on. I hear the start up sound and HDD working and all that but screen stays off for another 5+ sec. before finally going grey before apple logo comes up. Now I thought this isn't an issue since i did order it with ATI card instead of standard Nvidia. Figured different cards react differently. However, later on after playing a game for few hours and doing a restart it would do the same thing, but the screen would never turn on. Just stay black forever until i shut it down and wait a minute or two then power it back on. So to clear this up. What happens is, i push power button, start up sound happens, then black.... like it is off, not even the back light. This only happens every few days, not every restart.. I reset SMC, PRAM, ran hardware test, spoke with apple on phone, went to genius bar, and after all that and being passed around now the apple engineers are looking into my problem and i am expecting a call back from them. So i guess my question is, is there anyone else with this setup (ATI Radion) that has this issue?
View 2 Replies View RelatedOS X Yosemite :: Use IMac As External Display (since It Does Not Support Target Display Mode)?
Dec 1, 2014I have a new 27" iMac retina display. Is there any way to use it as an external display (since it does not support Target Display Mode)?
Info:
iMac with Retina 5K display, OS X Yosemite 10.10.1
IMac :: How To Keep Display Sleeping While Keeping External Display Active?
Jan 23, 2008Just wondering if anyone could help me figure this out.
I have my 40" flat screen plugged into my imac via VGA cable to mirror the image.
I'm just trying to have the imac display sleep while I play a movie full screen through the external TV.
I've tried two different ways but both have failed.
1-I set up a hot corner in the imac to sleep display but this results in both the display and the TV sleeping.
2-I just set the power settings to sleep after 1 minute. This works but then If a movie is playing the computer won't go to sleep.
Hardware :: 24" Cinema Display And I7 IMac Display - Should They Look The EXACT Same?
Jul 12, 2010Purchased a brand new 27" i7 imac a few weeks ago, display is awesome!!! I was using my old 28" LCD monitor from my PC and running dual displays on the iMac. The 28" LCD monitor annoyed me a bit because i could not get the same color/crispness/brightness that i got from the iMac. ( also it has a Matt screen and i am more into the glossy screens ) So i found a used 24" cinema display locally. Paid 600.00 and it came with 2 yrs of AppleCare. It is only 7 months old ( still have 5 months under orignal warranty ) Got home, hooked it up and it had a "hint" of yellowness to it, It wasn't a exact image of my iMacs display...I tried to calibrate it also, but it still had just a HINT of yellowness....Nothing at all major, but enough for me to be annoyed with it.
View 6 Replies View RelatedIMac :: Intel IMac Cannot Manage To Remove A Linux Boot Disc From The Optical Drive
Nov 1, 2009I'm using a 20" white intel iMac and cannot manage to remove a linux boot disc from the optical drive.At first, the only way that i managed to boot to the linux disc in the first place was from the Startup Disk menu in OSX. I could not even get to the Startup Manager ('opt' at boot) or boot straight to the disc ('C').Now i'm in a position where no matter what i do, the system boots to the linux disc. I cannot even force the startup into OSX to try to eject the disc from there. I've tried holding all of these keys/combinations at startup
View 3 Replies View RelatedHardware :: Disable IMac Display/use External Display Only?
Jan 13, 2010I just purchased a 23" monitor to replace my iMacs 17" display (since it has a nasty crack in one of the corners). I hooked it up fine and all, but the displays are linked, allowing me to hover the mouse to the iMac's display which I find annoying most of the time.
Is there a way to make the iMac display zone out and just use the external by itself?
IMac :: LED Cinema Display / Turning One Display Of Them Off
Sep 15, 2009As you can tell by the thread title I've got one of the latest model iMacs and I'm running an LED Cinema Display as a second monitor. When it gets to the late hours I like to watch some movies on the Mac so I figured the Cinema Display would be a nice addition to do the job.
Now here's my issue: if it's late and I'm watching movies I tend to not have any lights on, but having one of the displays on means having both of them on, what I'm wondering is if it's possible to sleep one display while allowing the other to stay active so I can watch the movie without the light from the other one distracting
IMac :: Turn Off The Display When Using An External Display?
Nov 10, 2009I'm interested in the new iMac but could not work with a glossy display. Can anyone share their experiences of using the iMac with an external display? In one respect it seems like a waste to have two monitors but the base model costs little more than the maxed out Mini and seems like the better option.
I would be interested in seeing photos of any setups featuring the iMac and an external display.
Also, is there a way to turn off the iMac display when using an external display?
