MacBook Pro :: Remove Page Number From Full Screen Display With Preview?
May 13, 2012
The full screen mode of Preview always shows a small grey bubble on the botton of the screen that indicates the page number. I would like to remove this page numbering. Is that possible? Since the page numbers are not on the pdf itsself but created by Preview I could not find how to remove them. I added a screen shot to indicate which page numbering I mean.
Info:MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
Teaching in Netherlands. When connected to wireless, signal bars are full but Macbook does not display any page just a blank page. Itunes and App store both work fine.Â
My windows notebook and Android phone both connect to wireless.No proxy options are ticked.Ran the Assistant Diagnostics: Selected Wireless, Network settings, ISP, Internet, Server went green/red then back to green with messafe saying Network Change detectedRestarted routerRemoved wifi network and reconnectedRan wireless diagnostics, nothing shows up Renewed DHCP LeaseChecked the Ipv4 and Router address - both begin 192.168.178.xThere are two DNS Server numbers - checked both and they are related to the ISP
Dont have ethernet cable to check wired connection
Info: MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I just purchased a Mac Mini and am using a DVI to HDMI cable to connect it to my 42" Sony KDF-E42A10. I am unable to achieve full-screen resolution and downloaded SwitchResX to manually adjust the display. Does anyone know the timing parameters for the Sony or how to achieve full-screen resoltuion?
I upgraded to Lion about a month ago. I didn't want to, but I had to to switch to iCloud which was the only way I could retain our family's six-year-old @mac.com and @me.com email addresses.Â
After working through a half dozen issues, everything seemed to finally be working smoothly. Just yesterday, though, Mac Mail stopped being able to open my iCloud email. It shows the sender, subject and the first couple lines of text in the listing of emails in the column to the left, but when I click on one or double click on one to view the entire message, I get "Loading" and a never-ending spinning wheel. Â
I have restarted everything, updated software, and repaired disk permissions. I don't want to delete the iCloud account and reinstall it because I have a couple hundred emails stored in folders residing on my machine.Â
My iCloud email works fine with my iPhone, iPad and on iCloud.com. I just can uses Mac Mail. But I access a half dozen other non-Apple email accounts-- POP and IMAP. Ironically, all the non-Apple email accounts work fine on Apple's Mac Mail.Â
I was wondering if anyone has heard of this problem and has a solution. So I opened Bridge CS4 (Snow Leopard is my OS) and selected a photo. Clicking on View - Full screen Preview on the menu bar doesn't show the picture full screen, and pushing space bar to view a full screen preview doesn't work either. What happens is that when I push space bar to get a full screen preview, the entire menu bar at the top of the screen and the dock disappears. So I'll click the desktop, and they reappear, but once I click Adobe Bridge, they disappear again. So I have to alt-q to quit adobe bridge to see the main application menu bar.
Is there is a way to open preview in a full screen directly after pressing a space bar? I mean without intermediate state, in which it leaves a lot of space around. I installed snow leopard and was pleased to see how preview is working in finder. The only problem with it is that it is not going to a full screen by default which I would prefer on my MacbookPro 15'' screen. Probably it will be preferable for most of laptops by the way. Unfortunately I didn't found such option.
I even ready to run some terminal thing that would give me that default behavior, as otherwise this preview is not very useful for me. I have Xee that works fantastically good for pictures, but preview is a preview isn't it? I mean if a preview doesn't give me more details, what kind of preview is that then? It can go to a fullscreen anyway, I just need it to go there directly....
For some reason VLC starts very slowly and lags when playing some H264 in mkv anime. So I turn to Mplayer. Is there a way to make it full screen. I tried every button but none seems to work.
I have a Samsung 2033SW hooked up to my mac and whenever I play video full-screen on on screen (either the laptop or the samsung), the other screen blacks out. This happens whether I use VLC, RealPlayer or Quicktime. How do I set it up so that I can play full-screen video on one and still be able to use the other screen for other stuff?
I'm pretty sure it's not because there aren't enough resources because I can still play "fit-to-screen" on one screen and still have access to the other screen.
I am using the "White" template, and on my top page, the page title is right there in my webpage. How can I get rid of this? When I load the page with text edit, I get some crazy Apple page, so I don't seem to be able to edit the HTML directly. Honestly, I hope to find solutions to problems like these so that I can avoid HTML in the future.
I have a strange problem in fullscreen mode, on my Macbook pro 15".I LOVE fullscreen, and infact the next macbook I will get is the 11" air because of its size and because full screen is so nice to work with.Suddenly the menubar will not display it self when I move the mouse to the top of the screen. The only way I can access the menu bar is by exiting full screen (ctrl + Cmd + F) and the toggel it back on after I have used the menubar .This actually makes fullscreen mode useless and its driving me nuts, because this should not happen on Apple software. I would expect these sorts of behaviour on windows but not in osx.
It is pretty good as a secondary display But is it possible to watch hulu using safari on the secondary isplay full screen. (hulu)And use my MacBook Pro to do other things at the same time?This is giving me trouble.Also anybody have any luck using pip with a samsung lcd tv?
I noticed that after upgrading to Lion quicktime player won't play movies full screen on my second display. Under Snow Leopard if the quicktime window was on the second display and you hit full screen it would fill the display is was on. Now the video slides to the main display and then goes full screen. There doesn't seem to be any way to change that behavior. There are no preferences. Â
The only work around is to move the menu bar in the display preferences to the second menu, so that the second monitor becomes the main one.Â
Info: MacBook Pro 17in 2.16, Mac OS X (10.4.7), 2gb ram 10.4.8
Display profile changes-the color correctness- changes whenever I enter fullscreen mode in-game, in dvd player, etc. Absolutely spontaneously. When I exit fullscreen it recovers to regular display profile. My regular display profile is "color LCD", and it changes to .
I have everything connected and working to display my MBP to my Sony Bravia HDTV. I am using the TV as a second display. When I choose full screen for my iTunes movie, it goes black. The iTunes movie plays in reduced screen. Does anyone have a solution how I can play full screen?
I am trying to play a couple of games on my mac mini 2010 and when they play full screen I only get 4:3 display and I cant get it to stretch to widescreen. I have tried all resolutions but the game still goes to 4:3 when I select fullscreen. I have my Mini connected to a 40" tv via HDMI.
Just wondering if there is a way to have videos in iTunes play full screen on a secondary display. I know you can do it in Quicktime, VLC and eyeTV with terminal... but all my content is in iTunes..Can anyone help?I take it from this overwhelming responce that it is not possible to do??
I've created a huge PDF file that I need to add page numbers to. The pages are numbered separately because the entire pdf file is an aggregation of several page numbering documents. But, I need a Master Page number that I can use to create a table of contents for the big PDF file. Anyone have any ideas that are not going to cost me a fortune? I've found several free programs that do that for Windows XP, but I need to be able to do this in OS X (Leopard) without spending a bunch of cash for software I don't need. like a full version of Adobe. I've created the PDF file using Preview by dropping in the pages I need.
I signed out of Safari then signed in again. Now the bookmarks for the AT&T - Yahoo page do not display on the page. Other bookmarks are intact. Do I have to reload them?
If there's a thread on this, feel free to close this one, but I searched and couldn't find anything. I need a guide on how to remove the display casing on a unibody MBP with an anti glare screen. Specifically, how to remove the actual top shell, where the Apple logo is. The LCD panel itself, I don't need to take apart. Is this possible? If someone has a link to a guide, that would be awesome.
Is it possible to find out the RAM manufacturer on a Macbook (it's a 3rd party module) by the part number? I've been searching for the past half hour, didn't found anything relevant Here are the full RAM specs:
I've got a Brother MFC-6490CW as printer and scanner. Everything was working fine for a year now and suddenly Prieview just freezes when I scan - but always after the second page.Â
I have removed the printer and installed it again. So, I downloaded the latest drivers.Â
I have read on a lot of forums that it is possible to merge AND SAVE multi-page pdfs with preview. I can get all of the images I want, but when I go to save as pdf in the print menu, it only shows ONE page. I have seen tutorials online and I have followed them step-by-step (I have Leopard 10.5.6), and simply cannot make this work - it will only save one page.
I have Adobe in my parallels but I absolutely loathe opening it because it brings my computer speed down to a crawl.
Please, if someone knows of a workaround for this, let me know! I am taking tons of screen shots and trying to merge them as pdfs in a quick way so I can send back and forth with my web designer.
I have pdf files I need to save, and the "save as" window drops down directly over the top of the page. Many times the pdf is scanned documents with titles, authors, and publication dates and journal names at the top of the first page. Therefore it is difficult (even though the drop down is opaque) to transcribe the article name into the save file as window, because that information is at the top of the page. I cannot scroll down in the document to have the information visible as it is typically page 1, and I cannot move the save as window over so I can see the file name I want to enter. I have to write the title down on a piece of paper then click save as then type the words in from the paper, even though the title I want to use is under the drop down.
I just don't like and feel uncomfortable to view the PDF in continuous scrolls mode. however, it is set to be default in Preview of Lion. How could I change the defaut setting to make it open in single page view instead of continuous scrolls mode?Â
