I just purchased a 23" monitor to replace my iMacs 17" display (since it has a nasty crack in one of the corners). I hooked it up fine and all, but the displays are linked, allowing me to hover the mouse to the iMac's display which I find annoying most of the time.
Is there a way to make the iMac display zone out and just use the external by itself?
I have a new 27" iMac retina display. Is there any way to use it as an external display (since it does not support Target Display Mode)?
Info:
iMac with Retina 5K display, OS X Yosemite 10.10.1
Just wondering if anyone could help me figure this out.
I have my 40" flat screen plugged into my imac via VGA cable to mirror the image.
I'm just trying to have the imac display sleep while I play a movie full screen through the external TV.
I've tried two different ways but both have failed.
1-I set up a hot corner in the imac to sleep display but this results in both the display and the TV sleeping.
2-I just set the power settings to sleep after 1 minute. This works but then If a movie is playing the computer won't go to sleep.
Is there a tweak out there that will disable the internal display while using an external monitor WITHOUT having to first close the lid on my macbook because I just leave my macbook plugged in for weeks a couple feet away from my desk and it's become a hassle to first close the lid, then move my mouse, then open the lid for better ventilation. I just want to leave it open and disable the display!
View 17 Replies View RelatedI'm interested in the new iMac but could not work with a glossy display. Can anyone share their experiences of using the iMac with an external display? In one respect it seems like a waste to have two monitors but the base model costs little more than the maxed out Mini and seems like the better option.
I would be interested in seeing photos of any setups featuring the iMac and an external display.
Also, is there a way to turn off the iMac display when using an external display?
My external display (HP w2207) seems to conflict with my MacBook Pro (15 inch Retina display, early 2013) since I upgraded MacBook OS to 10.9.4.The external display works at initial boot of Mac but does not work after OS sleeps and I attempt to awaken, and while the external display is not waking, the Retina display flashes through different screen views, which only partially reflect my normal screen, or do not reflect my normal screen at all.
Info:
OS X Mavericks (10.9.4)
For the past few months i have been using an external display hooked up to my 12" powerbook g4. I have had it on a dual display mode so no mirroring. Recently i would open the laptop lid waking it from being in sleep mode and my internal display will not turn on. The apply system profiler does not even recognize that the internal display exists. My external display works fine and has always been set as the main display. If i go to detect displays nothign happens. I have tried restarting the computer, instering system disks, unplugging the external and nothing has worked. I simply cannot get my internal screen to fire back up. When i used to unplug my external display the internal display would switch back to being the main display and everything would be fine. Now i cannot get the internal display to function whatsoever. Please try and help me as a need this laptop working and i will be ordering a mac pro soon for use with my external display.
View 1 Replies View RelatedI have a Macbook Air, and i just picked up the new LED ACD from my local apple store. Since im new to mac, is there a way to either close my Air and not have it go to sleep? I want to use the external display as the primary display with my laptop closed, any ideas?
View 4 Replies View RelatedI am about to buy a new 24" iMac. I currently have a Dell 2408WFP 1920*1200 display which I would like to use as a second display for the iMac.
Which Mini Dislpayport to DVI adapter do I need? Single-Link or Dual-Link?
I have a question about using dual displays with my new macbook. The basic issue is this:
1: plug in second display and setup dual monitor support to use the external hi-res display and the macbook's display (no problem here).
2: drag windows to the external display and resize to use (no problems here either).
3. Power down and disconnect the external display.
4. Start up the macbook without the external display and try and open up a program that I was using previously on the external display. The problem is that it is resized and positioned for the external display and is now off the screen of my macbook display and I can't directly get to the title bar to move it or the resize corner to resize it.
While using Google Sketchup and several other prgrams concurrently my macbook air cpu heats up substantiall. I like keeping the air "open" to allow for maximum heat disipation but of course this keeps the air screen on while I only want to use my external monitor. Is the only way to turn of the air screen turning down the brightness and using the "Mirror Display" option or is there another setting which alows my to utilize only the external display while the screen is open on the air?
Info:
MacBook Air, Mac OS X (10.7.4)
The title says it all really... Quite a simple problem that I can't find any answer to!
I've hooked up my 30" Apple Cinema Display to the new iMac 27" and the highest resolution I'm getting as an option is 1280x800... The iMac correctly detects the ACD as a Cinema HD display but limits my resolution. Why oh why?!
i am having a weird problem with my brand new imac.. I bought it custom made last friday with ATI Radeon HD 4850. Now here is my issue.. Every time i boot up it takes a while for the screen to turn on. I hear the start up sound and HDD working and all that but screen stays off for another 5+ sec. before finally going grey before apple logo comes up. Now I thought this isn't an issue since i did order it with ATI card instead of standard Nvidia. Figured different cards react differently. However, later on after playing a game for few hours and doing a restart it would do the same thing, but the screen would never turn on. Just stay black forever until i shut it down and wait a minute or two then power it back on. So to clear this up. What happens is, i push power button, start up sound happens, then black.... like it is off, not even the back light. This only happens every few days, not every restart.. I reset SMC, PRAM, ran hardware test, spoke with apple on phone, went to genius bar, and after all that and being passed around now the apple engineers are looking into my problem and i am expecting a call back from them. So i guess my question is, is there anyone else with this setup (ATI Radion) that has this issue?
View 2 Replies View RelatedIn the near future I will be purchasing a 24" iMac and I wanted to now if I could display TV programs or video game consoles on it using S-video (or another type of cable)like a normal Television screen.
I want to know because I also plan on purchasing a PS3 and want to display it on the iMac's beautiful 1080p screen!
Please tell me if there is any way so I can purchase the needed accessories in advance.
Hi this is my first time doing this, but I want to connect my iMac to my LCD TV via HDMI, but my computer only has a mini dvi port on the back. What cables do I need and is my iMac capable of outputting to 1080p?
I have the baseline late 2006 iMac (5,1) with ati x1600 card and my current display resolution is 1440x900.
Will I have to have both monitors on or can I just have the LCD TV be on and the iMac built in monitor be off?
Purchased a brand new 27" i7 imac a few weeks ago, display is awesome!!! I was using my old 28" LCD monitor from my PC and running dual displays on the iMac. The 28" LCD monitor annoyed me a bit because i could not get the same color/crispness/brightness that i got from the iMac. ( also it has a Matt screen and i am more into the glossy screens ) So i found a used 24" cinema display locally. Paid 600.00 and it came with 2 yrs of AppleCare. It is only 7 months old ( still have 5 months under orignal warranty ) Got home, hooked it up and it had a "hint" of yellowness to it, It wasn't a exact image of my iMacs display...I tried to calibrate it also, but it still had just a HINT of yellowness....Nothing at all major, but enough for me to be annoyed with it.
View 6 Replies View RelatedI want to take my old iMac G4 and use it as an external display for my MBP. Is this possible? Has anyone done this?
View 8 Replies View RelatedI've found that my 24" display just isn't big enough for the currents applications I'm using. Could I use the following to attach either a bigger monitor or my projector to the iMac?
[URL]
Is this even possible?
View 12 Replies View RelatedI bought iMac 27" 3.4 GHz quad core i7 ( with thunderbolt) , how can i use this iMac as external display of a PC with VGA only ?
Info:
iMac (27-inch Mid 2011), iOS 5.1
I'm trying to using my iMac wireless keyboad for my macbook pro while my iMac is in external display mode but I can't get the keyboad to connect. I've tried disconnecting the wireless keyboard from my iMac but it won't go into target display mode without the keyboad. Can I used my iMac wireless keyboard with my Macbook pro while my iMac is being used as an external display?
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), Main Computer
I have a 24-inch iMac that is ripe for replacement; my wife barely uses a 2010 15" MacBook Pro.
In 2011 I'm thinking of buying a MacBook Air for her and I take the MBP.
-I would buy a 27-inch display for the MBP;
-ideally she could use the 24-inch as external display for the MacBook Air
-or, alternatively, I would use the 24-inch as external display for the MBP
Would any of these solutions work?
I have a g3 slot loading Imac, which I am reusing as a computer for a family member who is visually impaired. I have bought a 22" monitor that can display a resolution of 1680x1050. but I can not display more than 1024x768. that I can't get it just to display on the external monitor, it uses both monitors with identical pictures.
View 1 Replies View RelatedAPPLE has posted a knowledge base article recently, saying that the 27 inches iMac could be used as an external display for other devices, using a third party converter to convert the signal to DisplayPort compliant signals.
[URL]
At least we have some official words that it does work and can expect those converter to be available soon
I posted yesterday about my 1.83 17 inch first generation intel iMacs screen dying. If we get an external display, is there a way to make that the main screen?
View 5 Replies View RelatedIs it possible to hook up an external display to an iMac?
View 4 Replies View RelatedAs you can tell by the thread title I've got one of the latest model iMacs and I'm running an LED Cinema Display as a second monitor. When it gets to the late hours I like to watch some movies on the Mac so I figured the Cinema Display would be a nice addition to do the job.
Now here's my issue: if it's late and I'm watching movies I tend to not have any lights on, but having one of the displays on means having both of them on, what I'm wondering is if it's possible to sleep one display while allowing the other to stay active so I can watch the movie without the light from the other one distracting
Why does it seem like my eMac display looks nicer than my iMac display? I always wanted to know or am I tripping?
View 14 Replies View Relatedjust got myself a new 21.5" imac and use to have 19" dell monitor but i sold that and wanted to know if there are any 21.5" monitors out there that look like imacs with a imac stand and black glossy border
View 9 Replies View RelatedToday I bought iMac 27-inch. Firstly I planned to buy 21.5 inch, but when I saw this 27-inch I decided to buy it. I've got Core 2 Duo version.
So, I wanna to connect my 360 to this iMac. I have Mini Display -> DVI adapter and than DVI -> HDMI adapter and the problem could be sound. DVI does not transmit any sound. So is there option to play sound from 360 on my iMac or via headphones? What if I connect stereo cables (into mini jack using adapter).
