Hardware :: Keyboard Bottom Stand Uneven On New IMac
Aug 24, 2010
I just received my new IMac and was starting to do some typing for a school project when I noticed that the keyboard bottom stand was uneven so whenever I type it bounces much like a chair with uneven legs. I was wondering what to do because now I have to stick a credit card underneath it to keep it from moving.
View 3 Replies
ADVERTISEMENT
Jan 12, 2011
My Air's screen is slightly darker at the bottom (only on a few millimeters, but still). It only happens on a white/light background though (I don't have my dock at the bottom). In comparison, the screen of my MacBook has a very uniform backlight. Does anybody else have this issue?
View 2 Replies
View Related
Sep 21, 2010
I'm looking for a stand specifically designed for an iMac. Does anyone know where I can find one? I think I need something around 3-5 inches higher?
View 1 Replies
View Related
May 17, 2009
Which speakers are better, the ones that come built-in on the '09 24" iMac or Logitech X230? I'm not sure what the iMac's speaker stats are, but here are the stats for x230's:
# Total RMS power: 32 W RMS
Satellites: 12 W RMS (6 W x 2)
Subwoofer: 20 W RMS
# Total peak power: 64 W
# Frequency response: 40Hz - 20kHz
# Drivers:
Satellites: (2) 2" drivers per satellite
Subwoofer: 5.25" ported driver
# Speaker dimensions (H x W x D, cm):
Satellites: 20.3 X 6.4 X 7.6
Subwoofer: 22.9 x 15.2 x23.5
# Signal-to-noise ratio: >96dB
Reason I ask is that I have the x230's and they're considered as cheap speakers, so I don't know if I should use them with the iMac or not. The one advantage I see them having over the iMac's is that they have a 20w subwoofer, but I don't know if the satellites are better or not.
View 10 Replies
View Related
Oct 21, 2009
I mean when it is upright on a desk, not just length measurements for the screen. I am afraid that the 27'' might have put my current desk out of commission
..or at least the shelf on top that stabilizes it.
View 9 Replies
View Related
Dec 13, 2009
Are there instructions anywhere as to how to remove the 27" iMac from the stand holding it up? I want to transport it without the stand attached and reattach it. Do I need any special tools? Can't find anything via google or other forums on exactly how to do this. It can't be too hard being that the Vesa mount is suppose to be easy to put on.
View 5 Replies
View Related
Apr 5, 2010
Looking for a stand, and I have a certain one that I can't find anywhere on the internet anymore even though I remember seeing it. It's a stand for the MBP that looks almost identical to the iMac and 24'' ACD stand. Is there a link or anything?
View 4 Replies
View Related
Jan 17, 2010
Is it possible to remove the display stand from the new iMac, if so how, is special equipment required.
View 4 Replies
View Related
Mar 3, 2009
It's like the LED Cinema Display, it's more of a Triangle shape than the old ones. I know it's a really small thing but it makes it look much better.
View 5 Replies
View Related
Oct 28, 2009
This post is a follow-up question to my earlier post, Best Arm Options For New 27" iMac...
(A) Does anyone know what the weight of the stand that comes with one of the new 27" iMac weighs alone?
(B) If not, is there anyone who (i) has removed their stand and has it at hand, and (ii) has a functioning weighing device available for use?
(C) if neither, thanks for reading, and goodnight!
View 7 Replies
View Related
Nov 12, 2009
Just wondering if anyone owns the slimkey iMac stand from macessity this or a similar model?
I'm just wondering if the stand is high and wide enough to accomodate the magic mouse next to the wireless keyboard, as this will really help to keep my desk tidy when i'm not using my iMac.
View 1 Replies
View Related
Nov 28, 2009
does anyone know the exact dimensions of the new 27" iMac without the stand attached? The depth would be nice too...
View 3 Replies
View Related
Aug 15, 2010
Can anyone tell me the torx size of the stand of the iMac 27"?
I need to remove the stand to transport the iMac (plane). What's the correct torx wrech to use?
View 1 Replies
View Related
Feb 21, 2009
bluetooth keyboard goNe straNge bottom two rows Not workiNg need to Cut ANd paste to geT letters for Cut this request for help Could it be Caused by tiny drop of ContaCt lense Cleaning fluid
View 4 Replies
View Related
Apr 6, 2012
i noticed a while ago that my bottom set of keys dont work such as - z x c v b n m , . / also the space button doesnt work either but all other keys do! im having to use a differant windows keyboard which is annoying because it doesnt have all the buttons that the mac
View 2 Replies
View Related
Aug 13, 2008
I have a macbook air in my household (it is not my laptop, but i bought it for my wife) and I am having a couple of issues.
1) occasionally, hard to reproduce, it looks like some of the LEDs at the bottom of the screen are going out. they alternate in a very specific dark light pattern. This started up a couple weeks ago
2) now the keyboard has now become unusable as the number keys are permanently shifted into !@#$% instead of 12345. The keys are not sticky or anything, and there does not appear to be any liquid damage, but then again, i am not the primary user of this laptop so who really knows.
Does any of this sound like something covered under warranty? Are there any water damage indicators i can check to see if damage was caused by this?
View 5 Replies
View Related
Dec 12, 2008
My niece was poking away at my MacBook and somehow brought up System Preferences by clicking some combination in the bottom left of the keyboard. I think it may of involved the ~ key. Does anyone know what it might be as it would be very useful? Last week she managed to move the dock to the left of the screen instead of the bottom with what looked like a single keystroke. However there may of been some kind of trackpad swipe involved.
View 2 Replies
View Related
Apr 20, 2012
Is there a keyboard shortcut to go to bottom of a Word document on a macbook pro using Lion?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
View 3 Replies
View Related
Dec 17, 2010
My air has an interesting case of uneven backlighting especially at the edges. This is not bothering to me because I think it's a result of the very thinly made LCD, which helps this computer be so small.
Test your MacBook Air 11.6" by downloading this image and putting it in fullscreen to see if your backlighting is uneven.
View 19 Replies
View Related
Apr 14, 2010
I just wanted to get a take on this. I recently sold my Macbook and still have a 2.66ghz iMac at home. I was going to pull the trigger on a new shiny MBP than I started doing some checking the the 330M I wish it were a better card.
So I got the idea to sell my iMac as well and get the iMac i7 and a low end MBP 13. Now this is what I would use it for. I need a portable for presentations, I do light photoshop and web work, entering into video FCP etc. I also bootcamp for bits of gaming (L4D, Dragon Age) and eyeing SC2 later on. With this in mind there are 3 issues.
1:
[URL]
2:
the iMac Screen issues (yellowing)and
3:
the cost will be about $300 more so $900 MBP only vs $1200 iMac and low end MBP.
I would like to save some money but damm only $300 more... aargghh
View 4 Replies
View Related
Jan 14, 2011
Seems my left USB port outputs more power than my right. Certain devices charge fine on the left but not on the right.
View 9 Replies
View Related
Nov 3, 2008
I was just noticing on my shiny new unibody MacBook Pro that the glass trackpad is uneven. At the bottom left side, it's basically flush with the surrounding case. But then it dips down on the bottom right to below the surrounding case. Is this normal, and has anyone else seen the same?
View 19 Replies
View Related
Sep 9, 2009
With the laptop open and sitting on a flat surface (granite countertop), I can press the lower left corner of the laptop down about 0.5 -1 mm and the computer wobbles a bit. It seems that the little black feet are not the same thickness all around. I am really surprised because Apple is so fanatical about having such low manufacturing tolerances... yet they somehow overlook the feet. Anyone else out there having this issue on their brand new unibody Macbook Pro? Does this go away after the feet have time to wear down a little?
View 9 Replies
View Related
Apr 21, 2010
I bought the new macbook pro 15inch 4 days ago. Today I just noticed that the hinge on the back of my laptop is uneven can I ask for a replacement? I still have the 14 day warranty.
View 24 Replies
View Related
Jul 30, 2010
I am planning to upgrade the standard 4gb of on my April 2010 Macbook Pro (the basic 2.4ghz model) to 6gb.
Over on Crucial memory suppliers they advise using two identical modules, i.e. 2 4gb sticks rather than 1 2gb + 1 4gb.
Can anyone chip in on whether this is good advise or just them trying to make a few more bucks?
For my needs 6gb should be perfect, I have a desktop already with that amount, although to be fair the desktop is 3 * 2gb modules.
View 3 Replies
View Related
Aug 12, 2010
Got my Macbook Pro i7 back from Apple today. First thing I notice is that the lid is uneven on one side. Second, I also have a small nick on the lid. (extremely small but none the less.) This is outrageous. This is there store you would think they would know how to treat their products perfectly. What should I do?
View 9 Replies
View Related
Nov 28, 2010
I bought it on black friday at an Apple retail store. And the second day I bought it, under the sunlight, I can see a slight.. mark across from the left all the way to the right on the bottom of the iMac. Is this part of the design?
View 9 Replies
View Related
Jul 12, 2009
My new 24 inch iMac is making clicking sounds in the bottom right hand (looking at screen). The clicking sounds is linked in an audio file below.
[URL]
View 3 Replies
View Related
Jul 5, 2010
I took my iMac panel off to clean and when I put it back I noticed as you run your finger from the bottom of the panel left to right or right to left, the glass begins to get thicker and eventually overlap just barely the metal in the middle. I can't remember if it was like this or not before, so I am wondering is this bent? And if so what should I do?
View 2 Replies
View Related
Jul 18, 2010
So after giving up the new iMacs after two replacements about six months ago for yellow screens......I thought I would try again.
The good news is that the white is very uniform with no yellowing. The bad news is that it has this dark band across the bottom of the screen just above the dock.
So I am basically in the same spot I was six months ago. Replace the unit for a new one, replace the screen, or just live with it. Maybe I am being too anal but for $2,500, I shouldn't have to live with anything but a perfect screen.
View 10 Replies
View Related