Hardware :: Printing From My Wireless Network
Jan 21, 2009
I'm trying to get used my first iMac, and I'm having a bit of trouble printing from my wireless network. I have an HP Officejet 6210 that I have been using for the last couple of years with my Windows computer. I'm trying to print off of that through my network, but I keep getting this error
"There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or stop the job and try again."
I have printer sharing turned on through my Windows computer since the printer is connected directly through my windows computer. My other Windows computer that I have at the house can print through the network, but I'm having problems doing so with my iMac. I have the right driver selected through system preferences/print & fax, but it just won't print.
View 1 Replies
ADVERTISEMENT
Mar 17, 2009
I bought my new (and first) unibody macbook 2 weeks ago. I'm loving everything about it
I was just wondering if the following is possible.
So I have a new macbook and a personal PC, both connected to a wireless internet network (with a D-Link Router).
There's a printer connected to my PC and I would like to know if it was possible to acces my PC through the internet and print files on it from my Macbook.
I hope I explained it good enough?
View 4 Replies
View Related
Aug 18, 2010
I am attempting to create an ad hoc network for the purpose of wireless printing, but I am clueless how to do so, or if it is even a possibility. I am a student and I do not want to connect my printer to the school's wireless network, nor do I want to connect via the USB interface. These are the peripherals:
Macbook Pro 13", 10.6.4
Brother HL 2170w
Can anyone explain to me how I might go about setting up a network on my Macbook Pro that my printer would be able to connect with?
View 2 Replies
View Related
Nov 13, 2007
Brand new iMac (my first one), sitting next to my Sony XP computer. I have a wireless network and have been able to share files between the two computers. I have all of my work information on my PC and am wanting to print to my new Canon Pixma printer which is connected to the MAC. I can "see" the printer when I go to printing preferences on my PC but when I hit print, I get an error message that says the printer if offline. I have all sharing enabled on both computers and when I go into the print queue, there is a document that is in there that it won't allow me to delete because it was "sent" by the owner "Valerie"....not sure if that is part of it or not. I guess my first question is, can I print over my wireless network through my MAC to the Canon and if I can, any idea what could be impeding me from printing?
View 3 Replies
View Related
Jun 4, 2012
When I arrive at my office and turn on my MB Air, it does not always connect to my wireless network, it sometimes connects to an un-secured wireless network locaterd somewhere else in the building. Is there a way to force Lion to always connect to a specfic network and ignore others?
View 3 Replies
View Related
Apr 13, 2010
My Brother HL-3040CN printer only has an ethernet connector for network printing (as well as a usb port). If I wish to print wirelessly is there an adaptor or a wireless hub that I can plug it into with the cable?
I'm asking this because I've read the iPad doesn't have any means of connecting it to a printer with a cable. I won't buy an iPad now but maybe next year.
EDIT: Would an Airport Express do the job?
View 1 Replies
View Related
Jan 5, 2011
I have just got my 1Tb time capsule and there are a lot of confusing descriptions of how to connect it.
At the moment I have just selected "join existing wireless network" which is a ADSL 2.4ghz G Router that came with my internet package (Thompson TG585 v7).
Does this mean that all traffic goes via the ADSL Router and that I will not be using the 5ghz band when I back up so that all the data will follow a path like this and have slow data rates? :
MAC --2.4ghz--> ADSL Router --2.4ghz--> TC
or will I be communicating directly with the TC at 5ghz for backups and data transfer and 2.4ghz with the ADSL router for internet like this? :
MAC --5ghz--> TC
ADSL Router --2.4ghz--> MAC
If this is not a good setup, what setup would allow me to get the full speed to the time capsule and be connected to the internet.
View 2 Replies
View Related
May 14, 2009
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies
View Related
May 3, 2012
OK, I asked this question previously, but not quite succinct enough, I think. I have a Pioneer home theater receiver that is network capable, but not wireless capable. I want to get this thing on my home network without having to purchase another device as my Mini resides no more than 36" away from it.So far, I have been able to get the receiver to connect to the internet through Internet Sharing on the Mini, but it remains blind to, and invisible to my wireless network. I simply want to connect the receiver to my Mini via ethernet cable and have it see and be seen on my wireless network. url...
Info:
Mac mini, Mac OS X (10.7.3), 2.7 GHz i7, 256 GB SSD, 8GB RAM
View 4 Replies
View Related
Mar 18, 2009
I have spent ages trying to get my printer working via my wireless network from my PC running windows. I have followed set up from about site and it seems all set up, but its not printing, I check the printer jobs and it seems its sending them as the jobs appear both on my mac and then on my p.c very briefly, but nothing prints. Printer is connected to my p.c and I can print from there. I must of done everything needed as the job is appearing on my pc and im getting a list of completed jobs at my mac end.
View 5 Replies
View Related
Sep 22, 2010
I am trying to figure out how to automatically connect a MacBook to a network drive after connecting to the wireless network that the drive is connected to.
Here is the situation:
I back-up my wife's MacBook via Time Machine to an external hard drive that is connected to my Apple desktop. It works great! I even have her system setup to automatically mount the drive upon log-in. Unfortunately, after leaving our wireless signal and then coming back the time machine drive isn't automatically mounted since she isn't "logging back-in". Is there an automator script that can be built to automatically connect to drive X after connecting to wireless network Z?
View 5 Replies
View Related
Dec 7, 2009
I have a 21.5 imac that I have setup on a wireless router. I am using the imac and two MBP's. I want to be able to print from windows xp on the MBPs but I do not know how to set it up. I can print from OSX on the MBPs but not windows.
View 2 Replies
View Related
Jun 24, 2012
I have an Epson printer connected to an old iMac. I have printer sharing turned on. I have been able to print from a Mac Book Pro on the same network (with the imac on), but NOW, for some reason, I can no longer print from the Mac Book.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 5 Replies
View Related
Jan 20, 2009
I have a Macbook, running XP Pro on via Bootcamp. It is connected to a wireless network. I want to print from XP bootcamp, wirelessly, to printers connected to a different computer (XP).
I have a PC that has 2 printers connected to it, running XP Home. Both printers are SHARED, with NAMES.
My 2 other computers (both PC's), can print to these printers wirelessly. I, cannot. I have installed all the drivers for the printers (using their CDs) on Bootcamp XP. I tried connecting to the printers, but I can't.
View 2 Replies
View Related
Aug 3, 2010
I have been like sweating for the last 3 hours trying to figure out how the heck to make my mac print to my printer. My printer is connected to my Windows XP Computer that I use for most printing. Now, I don't want to have to drag my MB all the way down 3 flights of stairs to where my Windows is to connect it. Is there a way to print wirelessly from a printer connected to windows so that I can print from my mac. my MacBook is running 10.6 Snow Leopard. And the Windows is running Windows XP 2007.
View 2 Replies
View Related
Jan 4, 2011
how do i get an hp50000nt to print when its hooked up to an airport extreme via ethernet. id like to be able to share this printer
i was able to add the airport extreme to my current network, just cant figure out the printer.
View 2 Replies
View Related
Sep 13, 2008
I have an iMac 2.4 GHz with 2 GB RAM. My printer is a Canon PIXMA iP5200, which is connected via USB cable to a Maxtor Shared Storage Plus external hard drive. The hard drive is on my home wireless network.
This setup has been working fine for two years with my Windows computers; however whenever I try to print from the iMac I get an error message saying "Network host '192.168.1.66' is busy; will retry in 5 seconds. That's followed by another message saying 10 seconds, and so on up to 30 seconds. Needless to say I never do get a successful print.
The computer can see the printer and says it is "idle" and "ready." There are no other jobs waiting in the queue. The printer was setup with Internet Printing Protocol. The driver is correct and the firmware for the Maxtor drive is up to date.
View 5 Replies
View Related
Oct 11, 2009
I have been trying everything I can think of to get 2 PC's on our home network to print on my Canon MP610 which is connected via USB to my MacBook Pro and the two PC's recognise the printer and add it as a device but when I try to print, the message "access denied, unable to connect" is displayed. If it's of any relevance, I cannot get the PC's to access the Public folder on the MBP over the network either.
View 8 Replies
View Related
Jul 15, 2010
Being the only Mac user in my house -however streamlined it is-, does hold a few problems. I have set up my iMac, and have happily joined my Windows home network, file sharing does work easily and neatly but as I found out the other day, printing from a Mac that is connected to a Windows based network can be very difficult. So for a long time now, I have been trying to set up my iMac (connected via WiFi) so that it prints over my home network. The printer; an EPSON TX100 is connected to the USB port in a Windows XP desktop and I have set up Printer sharing. The desktop is connected to my D-Link G604T.
I have added the printer through System Pref: Print & Fax:+:Windows tab: 'network':'computer':'printer' and have tried using both the Generic Postscript driver and the specified printer driver.
When I go ahead and print, the printer icon appears in the dock and then quickly disappears without a printout. I have replaced the ink and paper but still no luck. I have tried the methods suggested on some other threads, but none have succeeded. I would be happy to provide any extra information and try anything. Networked printing works with all Windows computers in the house including a NEC laptop, so why wont it work with a Mac?
View 4 Replies
View Related
Feb 7, 2009
I have a new unibody macbook pro and print from it using a wireless hp officejet pro 7410 all in one printer. I have a linksys wrt150n router. My pc laptop prints fast from it but the mac prints very slow. The printing actually stops for a while then starts again. It doesn't seem to do this all the time. I can't figure out what would slow it down.
View 2 Replies
View Related
Jun 27, 2009
I have my HP photo smart printer plugged into my time capsule. I never had any issues printing with my last laptop (MBA) but i just got a new 13" MBP and can't print. MBP sees the printer on my time capsule via Bonjour, but when I try to add it to my printers i get a dialog box that says: "type the name and password of a user in teh "_Ipadmin" group to allow AddPrinter to make changes." I have no idea what the "_Ipadmin" group is and i've tried all my normal user names & passwords but it tells me they are all wrong.
View 4 Replies
View Related
Jul 3, 2009
I currently have a cannon MP620 all in one printer, I mainly use this for my PC notebook. If I were to purchase an Airport Express how would I go about printing wirelessly? Would I need to instal any drivers from the printer since it would be a network printer? I'm pretty confused as to how wireless printing works with the Airport Express.
View 4 Replies
View Related
Dec 7, 2009
just converted and purchased a 21.5" iMac this weekend, he took advantage of that rebate offer on printers and picked up the black HP wi-fi printer. Anyhow he does not have an airport extreme or any type of wireless router since his iMac is right next to his modem, so he is using Ethernet.
So I tried setting up a wireless network using his internal airport card in his iMac and this worked out great i enabled internet sharing and printer sharing. For some reason when i try to connect his printer with his network it says that the network is not within reach even though the printer is right next to the iMac. Am I doing something wrong? is there something I'm missing? I know the wi-fi network is working properly because he is able to connect with his iphone and I was able to connect with my MBP.
View 6 Replies
View Related
Feb 25, 2012
how to install a Samsung CLX-3185FW to print wirelessly? I have downloaded the drivers from the Samsung site which enable me to print via USB and also to connect the printer to the home wireless. On a MACBook Air I've managed to install the printer using the IP address. I can then print from the MacBook Pro by sending it through the MBAir as the printer shows up as connected to the MBAir. However, when I try to install the printer to the MBPro using the IP address I'm told that Apple doesn't have the necessary software. Consequently, I'm unable to print directly from the MBPro to the printer.
Info:
MacBook Pro (13-inch Early 2011)
View 4 Replies
View Related
May 4, 2012
got my self a new macbook pro and a time capsule, but when i try to hook it up I can't seem to get it to print wirelessly with my HP Photosmart printer.Have the printer connected to time capsule by usb cable, my macbook recognizes the printer by make and model, but then says the printer is not hooked up.
Info:
MacBook Pro
View 1 Replies
View Related
Jun 25, 2009
I'm extending my Airport Extreme router with an Airport Express. In the Airport Utility I am given these options:
"Extend a wireless network"
"Participate in a WDS network"
Which one should I choose and why?
View 2 Replies
View Related
Nov 3, 2008
I'm trying to connect my leopard macbook to a Canon Pixma MP210 that his hooked up to an XP machine. Sharing is enabled in XP on the printer and I can successfully add the printer to the mac in system preferences. I've downloaded the proper drivers from Canon's website and selected them for the printer. The problem is that when I try to execute a print job, the print queue comes up and hangs on status "printing."
Also, on the XP machine, the print queue recognizes a job is being requested but the status hangs on "spooling." The document never actually prints. Finally after a couple minutes, the print queue in the mac has an error stating: "Error Number : 311 Printer is in use or an error has occurred. If an error has occurred, eliminate the cause of the error."
View 5 Replies
View Related
Apr 3, 2010
I am in need of some help with my AEBS v2. I just bought it today and a little bit confused coming from a Linksys.I have an HP Photosmart C4480 and setup the printing and it works with my MBP but when I try to add it for my sister's Windows XP laptop it can't find the printer whatsoever even with bonjour installed and all. I'm in need of your assistance to get it working.
View 2 Replies
View Related
Aug 23, 2010
I have been trying to set up this printer: Toshiba e studio 2330C And I can get it to print fine from Windows (parallels) but I can't get it to print from the OS X side. I think it has something to do with the fact that I don't get an option to enter my department code (5 digit number so admins can keep track of our printing). We have no admins here (I'm the best we got) and I don't know what to try. I have read this page: [URL:..] But that didn't help (never had the printer mode option come up).
View 3 Replies
View Related
Mar 17, 2009
I have an issue here that I could really use some help with.I've downloaded the driver from HP HP LaserJet P1000-P1500 Series...and that works if the printer is connected via USB.However, the primary computer for this printer is a Windows XP and thus I need to connect via the network.Going through the "Add Printer" process, I can see the printer in my network...but the driver isn't showing up in the list of options...which I don't get, since I figured that since I've installed the driver it would show up in the list, but alas it is not.
View 2 Replies
View Related
