MacBook Pro :: Wireless Printing With Samsung CLX-3185FW?

Feb 25, 2012

how to install a Samsung CLX-3185FW to print wirelessly? I have downloaded the drivers from the Samsung site which enable me to print via USB and also to connect the printer to the home wireless.  On a MACBook Air I've managed to install the printer using the IP address.  I can then print from the MacBook Pro by sending it through the MBAir as the printer shows up as connected to the MBAir.  However, when I try to install the printer to the MBPro using the IP address I'm told that Apple doesn't have the necessary software.  Consequently, I'm unable to print directly from the MBPro to the printer.   

Info:
MacBook Pro (13-inch Early 2011)

View 4 Replies


ADVERTISEMENT

OS X V10.7 Lion :: Samsung CLP-310 Not Printing With 10.7.3

Mar 19, 2012

I knew about a lot of problems with Lion and Printers, even here on this Forum I see quite a lot of posts ...but I hoped not for my Samsung CLP-310 Laser Color.I was wrong, because after a software update relating Samsung Printer (and before the update didn't print anyway ...),I'm still not able to print.I've tried to print out just after the update process without any result, so I've rebooted ... nothing, same problem.System Preference "Printer" panel says it's ok, the printer has a nice green bullet aside the icon, status not active and so on as on SnowLeopard; everything seems good, but when I print an advice reports an error "You need update the printer software, do you want I search for you ?" ... Ok, my dear search for me ... but after a while "No software updates available".

View 1 Replies View Related

OS X :: Samsung ML-1640 Laser Printer - Reverse Order Printing

Jul 22, 2009

So i just bought the Samsung ML-1640 Laserjet printer, i just printed a 100 page document to test it out, function is fine but the first page it printed was the last page which would be fine except the pages fall out text down, so when i pickup the completed wad of pages i flick through:

last page - penultimate page -........-first page

how do i reverse the order of printing so that it prints the first page first

View 2 Replies View Related

Hardware :: Non Wireless Printer For Wireless Printing?

Apr 13, 2010

My Brother HL-3040CN printer only has an ethernet connector for network printing (as well as a usb port). If I wish to print wirelessly is there an adaptor or a wireless hub that I can plug it into with the cable?

I'm asking this because I've read the iPad doesn't have any means of connecting it to a printer with a cable. I won't buy an iPad now but maybe next year.

EDIT: Would an Airport Express do the job?

View 1 Replies View Related

MacBook :: Wireless Printing From Windows?

Aug 3, 2010

I have been like sweating for the last 3 hours trying to figure out how the heck to make my mac print to my printer. My printer is connected to my Windows XP Computer that I use for most printing. Now, I don't want to have to drag my MB all the way down 3 flights of stairs to where my Windows is to connect it. Is there a way to print wirelessly from a printer connected to windows so that I can print from my mac. my MacBook is running 10.6 Snow Leopard. And the Windows is running Windows XP 2007.

View 2 Replies View Related

MacBook Pro :: Wireless Printing Via Time Capsule

May 4, 2012

got my self a new macbook pro and a time capsule, but when i try to hook it up I can't seem to get it to print wirelessly with my HP Photosmart printer.Have the printer connected to time capsule by usb cable, my macbook recognizes the printer by make and model, but then says the printer is not hooked up.

Info:
MacBook Pro

View 1 Replies View Related

MacBook Pro :: Wireless Printing Stopped With New Security Update?

Feb 5, 2012

Using a MacBook Pro 2.16 Ghz Intel, running 10.6.8 - ever since I installed the security update I can no longer print.  Printer is a Brother HL-4570CDW color laser with current drivers.  Ran disc utility to repair permissions but no change.

Info:
Aperture 3, Mac OS X (10.6.7), Western Digital My 1TB My Book

View 2 Replies View Related

OS X :: Wireless Connection To Samsung Led TV (UN40B OR UE40B 7020)

Sep 6, 2009

I've got Mac OSx and trying to wireless connect to my new Samsung LED 7000 series TV using the Samsung Dongle I bought as an addition. But the software in the box and on Samsung website is PC only. I've tried connecting anyway but thus far failed.

View 1 Replies View Related

Hardware :: Samsung CLP-315W - Can't Get It To Connect To Wireless Network

Oct 14, 2009

I was able to print out a Network Configuration Report which indicates an IP Address, MAC Address, Subnet Mask, etc. It even says that the thing is connected to a network called "airportthru" but I have no idea what that is either... I'm an absolute networking zero for the record.

I can't access the SyncThru Web Service (as noted in the instructions) because when I put the IP address into my browser - both Safari and Firefox - I get an error (can't open the page because the server can't be found).

View 8 Replies View Related

OS X :: Printing On A Wireless Network?

Mar 17, 2009

I bought my new (and first) unibody macbook 2 weeks ago. I'm loving everything about it

I was just wondering if the following is possible.

So I have a new macbook and a personal PC, both connected to a wireless internet network (with a D-Link Router).

There's a printer connected to my PC and I would like to know if it was possible to acces my PC through the internet and print files on it from my Macbook.

I hope I explained it good enough?

View 4 Replies View Related

Windows On Mac :: Wireless Printing From Bootcamp XP?

Jan 20, 2009

I have a Macbook, running XP Pro on via Bootcamp. It is connected to a wireless network. I want to print from XP bootcamp, wirelessly, to printers connected to a different computer (XP).

I have a PC that has 2 printers connected to it, running XP Home. Both printers are SHARED, with NAMES.

My 2 other computers (both PC's), can print to these printers wirelessly. I, cannot. I have installed all the drivers for the printers (using their CDs) on Bootcamp XP. I tried connecting to the printers, but I can't.

View 2 Replies View Related

Hardware :: Printing From My Wireless Network

Jan 21, 2009

I'm trying to get used my first iMac, and I'm having a bit of trouble printing from my wireless network. I have an HP Officejet 6210 that I have been using for the last couple of years with my Windows computer. I'm trying to print off of that through my network, but I keep getting this error

"There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or stop the job and try again."

I have printer sharing turned on through my Windows computer since the printer is connected directly through my windows computer. My other Windows computer that I have at the house can print through the network, but I'm having problems doing so with my iMac. I have the right driver selected through system preferences/print & fax, but it just won't print.

View 1 Replies View Related

OS X :: Slow Wireless Printing From Mac (Linksys Router)

Feb 7, 2009

I have a new unibody macbook pro and print from it using a wireless hp officejet pro 7410 all in one printer. I have a linksys wrt150n router. My pc laptop prints fast from it but the mac prints very slow. The printing actually stops for a while then starts again. It doesn't seem to do this all the time. I can't figure out what would slow it down.

View 2 Replies View Related

OS X :: Wireless Printing With MBP - Username Password Dialog

Jun 27, 2009

I have my HP photo smart printer plugged into my time capsule. I never had any issues printing with my last laptop (MBA) but i just got a new 13" MBP and can't print. MBP sees the printer on my time capsule via Bonjour, but when I try to add it to my printers i get a dialog box that says: "type the name and password of a user in teh "_Ipadmin" group to allow AddPrinter to make changes." I have no idea what the "_Ipadmin" group is and i've tried all my normal user names & passwords but it tells me they are all wrong.

View 4 Replies View Related

OS X :: How Does Wireless Printing Work On Airport Express

Jul 3, 2009

I currently have a cannon MP620 all in one printer, I mainly use this for my PC notebook. If I were to purchase an Airport Express how would I go about printing wirelessly? Would I need to instal any drivers from the printer since it would be a network printer? I'm pretty confused as to how wireless printing works with the Airport Express.

View 4 Replies View Related

IMac :: Wireless Printing Using Airport Card?

Dec 7, 2009

just converted and purchased a 21.5" iMac this weekend, he took advantage of that rebate offer on printers and picked up the black HP wi-fi printer. Anyhow he does not have an airport extreme or any type of wireless router since his iMac is right next to his modem, so he is using Ethernet.

So I tried setting up a wireless network using his internal airport card in his iMac and this worked out great i enabled internet sharing and printer sharing. For some reason when i try to connect his printer with his network it says that the network is not within reach even though the printer is right next to the iMac. Am I doing something wrong? is there something I'm missing? I know the wi-fi network is working properly because he is able to connect with his iphone and I was able to connect with my MBP.

View 6 Replies View Related

Hardware :: Setting Up Ad Hoc Network For Wireless Printing?

Aug 18, 2010

I am attempting to create an ad hoc network for the purpose of wireless printing, but I am clueless how to do so, or if it is even a possibility. I am a student and I do not want to connect my printer to the school's wireless network, nor do I want to connect via the USB interface. These are the peripherals:

Macbook Pro 13", 10.6.4

Brother HL 2170w

Can anyone explain to me how I might go about setting up a network on my Macbook Pro that my printer would be able to connect with?

View 2 Replies View Related

Hardware :: Airport Express Wireless Printing With Old HP LaserJet 6P ?

Aug 13, 2009

I've recently acquired an old HP LaserJet 6P printer. I've successfully connected it to my MacBook (10.5.8) using a Parallel-USB Converter Cable and Gimp-Print drivers - it doesn't have a built-in USB port. What I'd like to do now is connect the LaserJet to my Airport Express to allow me to print wirelessly. Has anyone done something similar to this before? Has it worked? I'd like to get advice first so I don't end up wasting hours and banging my head off a wall trying to get this to work.

View 1 Replies View Related

Hardware :: Security On Wireless Printing With Time Capsule

Jun 1, 2009

About an hour ago I was just sitting in my apartment working, when suddenly my printer starts printing pages. Some road directions to a place I've never heard of. Someone in my building must somehow have gotten access to my printer, right? My printer is hooked up as a USB printer to my Time Capsule, through which I've made a wireless network. I've just spent an hour making sure my Time Capsule and its network are WPA2 password protected, and searching forums for similar issues. Both the Time capsule and my network were password protected, though I changed the passwords again for good measure, and made the network invisible. No one could access my printer without also having access to my network, correct? (it's not a wireless printer, it's an older HP deskjet).

how this may have happened, or more important, how to make sure it doesn't happen again? Am I missing some security step I do notice that when I go into the Airport utility, I can see other people's devices-- some other Airport and base station. Is this normal? Is it part of the issue?

View 7 Replies View Related

Hardware :: Airport Extreme - Wireless Printing Options?

Aug 3, 2010

Just purchased an Airport extreme - love the wireless boost for all computers but can not get the wireless epson printer to printer. Current set upCable modem to Airport Extreme - hardwired to house PC. Wireless to Imac, G5 mac, xbox 360, ipad - all works with excellent signal and speed.Printer located on 2nd floor by Mac G5 and printed via wireless before airport extreme and will not print. There is no way we can set up the air port at the G5 with the printer or move the printer to airport extreme. Does the printer have to be USB connected to work - we just want to transmit to the wireless printer with no connection.

View 1 Replies View Related

Hardware :: Printing Through XP On Wireless Network To Canon Pixma MX310?

Nov 13, 2007

Brand new iMac (my first one), sitting next to my Sony XP computer. I have a wireless network and have been able to share files between the two computers. I have all of my work information on my PC and am wanting to print to my new Canon Pixma printer which is connected to the MAC. I can "see" the printer when I go to printing preferences on my PC but when I hit print, I get an error message that says the printer if offline. I have all sharing enabled on both computers and when I go into the print queue, there is a document that is in there that it won't allow me to delete because it was "sent" by the owner "Valerie"....not sure if that is part of it or not. I guess my first question is, can I print over my wireless network through my MAC to the Canon and if I can, any idea what could be impeding me from printing?

View 3 Replies View Related

OS X V10.7 Lion :: Wireless Printing Error - OKIHC003.plugin... Fail?

Jun 16, 2012

I bought a brand new OKI C511 and although I can connect when USB is directly connected my my MacBook, when trying to do so wirelessly, I get: /Library/Printers/OKIDATA/Filters/OKIHC003.plugin/Contents/MacOS/OKIHC003 failed Can anybody help me with this? I've been trying to get it to work for the last 10 hours and I am so frustrated. Taking another route (not USB Bonjour) I tried setting up IP with LPD. I get that my IP address is "valid and complete". Leaving Queue blank as instructed on the "Add Printer" pane, I choose "Print Using" C511  then I get "Unable to connect due to an error. Would you still like to create the queue?".   Neither Continue or Cancel lets me print. I read somewhere to put "lp" in the queue instead of leaving it blank and that does not work either. I tried selecting a generic printer instead of my installed driver 511 but no success.  Is there some other way that I can print wirelessly from this printer?

View 3 Replies View Related

OS X :: Connecting MacBook Pro To Samsung LCD

Apr 23, 2009

I thought it would be pretty straight forward connecting my mbp to my lcd samsung. I'm using a belkin hdmi to dvi, and after I connect and select the input on the tv, all I see is the original os x background on the tv. Ao at least I am seeing something and the cable seems to be working, but that's all I see. I can't get anything else to display. When I watch instruction videos people just seem to get the whole desktop with dash and everything to display right after connecting.

View 2 Replies View Related

MacBook Pro :: How To Watch DVD's On Samsung LCD TV

Jun 17, 2010

My wife and I have never had a TV and have always watched DVD's on our not-even-one-year-old MacBook Pro and after moving into a house, yada yada yada, we finally purchased a Samsung LN46C630 LCD TV.

Now, we aren't ready to buy a Blu-Ray player yet so we want to continue to watch DVD's on our MBP and hook it up to the TV and watch it from there.

View 2 Replies View Related

MacBook Pro :: Hooking Up It To Samsung TV?

Mar 3, 2012

I  am trying to hook up a Mac book Pro purchased in Sept to a Smssung LCD TV purchased in Sept. I fet the computer display onthe TV but no sound. I have no sound-cables but apparently the newer Prod do not need them? The one lead goes from the Mac to the HDMI 1.

Info:
MacBook Pro

View 2 Replies View Related

MacBook Pro :: Hew To Get Connected With Samsung TV

Apr 8, 2012

I am trying to connect my 17 inch early 2012 to a samsung 52 TV I can't I would like to know why?

Info:
Mac Pro, Mac OS X (10.7.3)

View 1 Replies View Related

MacBook Pro :: Using Samsung ML-2165 On OS 10.7.4?

Jun 7, 2012

I tried numerous different times to connect this printer wirelessly and it's not connecting. 

Info:
MacBook, Mac OS X (10.7.2)

View 2 Replies View Related

MacBook Pro :: Compatible With Samsung Plasma TV?

Sep 28, 2010

new Samsung Plasma television and have not been successful in attempting to connect my MacBook Pro to it. Here's what I've done thus far. I'm not sure of what the port is called on my MacBook, but I regularly use it at work to connect to a separate monitor so I know it works. I believe it's some type of DVI port but I know it's not a mini-dvi because I initially bought a mini-dvi adapter and that didn't fit the port. But I've got an adapter that plugs into that port, and converts to DVI. Then a second adapter that converts DVI to HDMI. Then I have a HDMI to HDMI cable that connects to my tv.

View 2 Replies View Related

OS X :: Using Macbook With Samsung Syncmaster Xl2270?

Dec 31, 2010

macbook 2.16GHz

OS X 10.4.11

I received a Samsung SyncMaster XL2270 as a gift. I would like to use it as a desktop monitor for my macbook when at home, but the driver included with the monitor is not mac compatible.

View 1 Replies View Related

MacBook :: Connecting To Samsung LCD Audio?

Feb 17, 2009

I am trying to connect my macbook to my Samsung LCD TV. The TV is Samsungs 3 series, and has 2 HDMI, audio, optical, RCA and PC input. I hooked up the video via the display port-HDMI and used the HDMI 1 port on my TV. It looks great. I tried my 3.5 audio cable to plug into the audio input on the TV. No luck. The audio input seems to correspond to that PC input so I'm guessing that I have to use the PC input in order to get the audio to work as well. Is this accurate? If so does anyone recommend an audio connection type that would work? Maybe I'll just run to Best Buy to get a 3.5 audio cable to RCA.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved