I have an Epson printer connected to an old iMac. I have printer sharing turned on. I have been able to print from a Mac Book Pro on the same network (with the imac on), but NOW, for some reason, I can no longer print from the Mac Book.
Info:
MacBook Pro, Mac OS X (10.6.8)
I'm trying to connect my leopard macbook to a Canon Pixma MP210 that his hooked up to an XP machine. Sharing is enabled in XP on the printer and I can successfully add the printer to the mac in system preferences. I've downloaded the proper drivers from Canon's website and selected them for the printer. The problem is that when I try to execute a print job, the print queue comes up and hangs on status "printing."
Also, on the XP machine, the print queue recognizes a job is being requested but the status hangs on "spooling." The document never actually prints. Finally after a couple minutes, the print queue in the mac has an error stating: "Error Number : 311 Printer is in use or an error has occurred. If an error has occurred, eliminate the cause of the error."
My Macbook recognizes the IP address of the network printer on the network I'm on here at the church I work at, but I cannot print to it because it requires an authentication track. When I click file>print in an excel sheet or a word document the print screen comes up. In the drop down menu where it says "copies & pages" there should be an option for an authentication track or number, but there is not. It is simply not there. There actually should be a lot more options but there are not. I simply have a few, scheduler, summary, layout, etc. What can I do to get to the point where I can authenticate to print on that printer?
View 1 Replies View RelatedI have spent ages trying to get my printer working via my wireless network from my PC running windows. I have followed set up from about site and it seems all set up, but its not printing, I check the printer jobs and it seems its sending them as the jobs appear both on my mac and then on my p.c very briefly, but nothing prints. Printer is connected to my p.c and I can print from there. I must of done everything needed as the job is appearing on my pc and im getting a list of completed jobs at my mac end.
View 5 Replies View RelatedI bought my new (and first) unibody macbook 2 weeks ago. I'm loving everything about it
I was just wondering if the following is possible.
So I have a new macbook and a personal PC, both connected to a wireless internet network (with a D-Link Router).
There's a printer connected to my PC and I would like to know if it was possible to acces my PC through the internet and print files on it from my Macbook.
I hope I explained it good enough?
I have a 21.5 imac that I have setup on a wireless router. I am using the imac and two MBP's. I want to be able to print from windows xp on the MBPs but I do not know how to set it up. I can print from OSX on the MBPs but not windows.
View 2 Replies View Relatedhow do i get an hp50000nt to print when its hooked up to an airport extreme via ethernet. id like to be able to share this printer
i was able to add the airport extreme to my current network, just cant figure out the printer.
I have an iMac 2.4 GHz with 2 GB RAM. My printer is a Canon PIXMA iP5200, which is connected via USB cable to a Maxtor Shared Storage Plus external hard drive. The hard drive is on my home wireless network.
This setup has been working fine for two years with my Windows computers; however whenever I try to print from the iMac I get an error message saying "Network host '192.168.1.66' is busy; will retry in 5 seconds. That's followed by another message saying 10 seconds, and so on up to 30 seconds. Needless to say I never do get a successful print.
The computer can see the printer and says it is "idle" and "ready." There are no other jobs waiting in the queue. The printer was setup with Internet Printing Protocol. The driver is correct and the firmware for the Maxtor drive is up to date.
I'm trying to get used my first iMac, and I'm having a bit of trouble printing from my wireless network. I have an HP Officejet 6210 that I have been using for the last couple of years with my Windows computer. I'm trying to print off of that through my network, but I keep getting this error
"There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or stop the job and try again."
I have printer sharing turned on through my Windows computer since the printer is connected directly through my windows computer. My other Windows computer that I have at the house can print through the network, but I'm having problems doing so with my iMac. I have the right driver selected through system preferences/print & fax, but it just won't print.
I have been trying everything I can think of to get 2 PC's on our home network to print on my Canon MP610 which is connected via USB to my MacBook Pro and the two PC's recognise the printer and add it as a device but when I try to print, the message "access denied, unable to connect" is displayed. If it's of any relevance, I cannot get the PC's to access the Public folder on the MBP over the network either.
View 8 Replies View RelatedBeing the only Mac user in my house -however streamlined it is-, does hold a few problems. I have set up my iMac, and have happily joined my Windows home network, file sharing does work easily and neatly but as I found out the other day, printing from a Mac that is connected to a Windows based network can be very difficult. So for a long time now, I have been trying to set up my iMac (connected via WiFi) so that it prints over my home network. The printer; an EPSON TX100 is connected to the USB port in a Windows XP desktop and I have set up Printer sharing. The desktop is connected to my D-Link G604T.
I have added the printer through System Pref: Print & Fax:+:Windows tab: 'network':'computer':'printer' and have tried using both the Generic Postscript driver and the specified printer driver.
When I go ahead and print, the printer icon appears in the dock and then quickly disappears without a printout. I have replaced the ink and paper but still no luck. I have tried the methods suggested on some other threads, but none have succeeded. I would be happy to provide any extra information and try anything. Networked printing works with all Windows computers in the house including a NEC laptop, so why wont it work with a Mac?
I am in need of some help with my AEBS v2. I just bought it today and a little bit confused coming from a Linksys.I have an HP Photosmart C4480 and setup the printing and it works with my MBP but when I try to add it for my sister's Windows XP laptop it can't find the printer whatsoever even with bonjour installed and all. I'm in need of your assistance to get it working.
View 2 Replies View RelatedI am attempting to create an ad hoc network for the purpose of wireless printing, but I am clueless how to do so, or if it is even a possibility. I am a student and I do not want to connect my printer to the school's wireless network, nor do I want to connect via the USB interface. These are the peripherals:
Macbook Pro 13", 10.6.4
Brother HL 2170w
Can anyone explain to me how I might go about setting up a network on my Macbook Pro that my printer would be able to connect with?
I have been trying to set up this printer: Toshiba e studio 2330C And I can get it to print fine from Windows (parallels) but I can't get it to print from the OS X side. I think it has something to do with the fact that I don't get an option to enter my department code (5 digit number so admins can keep track of our printing). We have no admins here (I'm the best we got) and I don't know what to try. I have read this page: [URL:..] But that didn't help (never had the printer mode option come up).
View 3 Replies View RelatedI have an issue here that I could really use some help with.I've downloaded the driver from HP HP LaserJet P1000-P1500 Series...and that works if the printer is connected via USB.However, the primary computer for this printer is a Windows XP and thus I need to connect via the network.Going through the "Add Printer" process, I can see the printer in my network...but the driver isn't showing up in the list of options...which I don't get, since I figured that since I've installed the driver it would show up in the list, but alas it is not.
View 2 Replies View RelatedI am trying to connect to a windows network printer through my MacBook Air. I can connect to the printer via the windows network and can send documents to print. The document goes through to print but at the last second it says there is an error. When looking on the network windows computer, in which the printer is installed, I can see the document has gone through to print using the printer dialogue box for microsoft, but it details there is an error and the document doesn't print.
It seems that they are connected but there is still an error.Both Windows and Mac computers are up to date currently and the printer is a HP Deskjet F4180.
I have bucked the household Wintel trend and bought an iMac. I'd like to use our Kyocera printer which everyone else connects to via our WiFi (linksys) but my iMac doesn't see the device (internet yes). I installed bonjour for windows on the primary machine and it doesn't see the printer either. I have checked printer sharing everywhere to no avail. I am running OS X 10.5.6 and the rest of the machines in the house are Windows XP.
View 3 Replies View RelatedI have a Canon printer connected to my G5. My G5 connected to my WiFi router. My MacBook has Airport. I have set the G5 to share the printer but it is not recognized by the MacBook. What am I doing wrong?
View 1 Replies View RelatedI am new to Mac. Recently I bought a Macbook Air with OS X v10.7. I have a ADSL router with the Canon printer with fixed IP 192.168.2.100. I have a wireless router connected to the ADSL router. This wirless rouer is in another subnet 192.168.3.0.My Windows 7 notebook I am able to print wirelessly to the Canon using a manual configuration (IP printing). As for the Mac, I have installed the latest Canon CUPS drivers and the Canon IJ Network Tool. I use the Canon IJ Network tool, I am not able to scan for the printer. I configure manually with the IP address such as IPP://192.168.2.100 but it still cannot print. The status of printer goes from idle to busy.
Info:
MacBook Air, Mac OS X (10.7.4)
Brand new iMac (my first one), sitting next to my Sony XP computer. I have a wireless network and have been able to share files between the two computers. I have all of my work information on my PC and am wanting to print to my new Canon Pixma printer which is connected to the MAC. I can "see" the printer when I go to printing preferences on my PC but when I hit print, I get an error message that says the printer if offline. I have all sharing enabled on both computers and when I go into the print queue, there is a document that is in there that it won't allow me to delete because it was "sent" by the owner "Valerie"....not sure if that is part of it or not. I guess my first question is, can I print over my wireless network through my MAC to the Canon and if I can, any idea what could be impeding me from printing?
View 3 Replies View RelatedI have just setup a Time Capsule to host a local wireless network to replace an older wireless/wired mixture.
The network works a treat, and our four office computers all pick it up without issue. I have plugged a USB Epson Inkjet printer into the TC's USB port, and all the networked computers can print to it without issue.
However, we also have a trusty LaserWriter 8500 that we use. I plugged this into the first ethernet (LAN) port on the TC , and expected just to be able to add it in the Print & Fax Preference pane. Sadly though, this is not the case. The printer cannot be found in the Default Browser, or the AppleTalk tab (AppleTalk has been turned on for AirPort).
Does any one know if there is network laser printer that has password protected printing feature, and it is supported under Mac OSX. Basically I'm looking for a printer for my office, to be used by all employees and some of them would use password to get their sensitive printouts.
View 3 Replies View RelatedI need help setting up network printing. I have a new router N600. I can not see the printer.
Info:
MacBook, Mac OS X (10.6.8)
I've recently come back to apple mac's, however before my new G4 ibook, i had a few pc's set up on a network, i've still got them and i want to add my ibook to the network, i've got most of it working, however my laserjet 4M plus which has a print server installed in it, which works perfectly with the pc's doesn't want to work with my new ibook. My ibook is connected via airport to a linksys access point, and that to the router, which in the connected to the laserjet. I can Ping the router and it all seems fine, but getting it to print just isn't happening.
View 2 Replies View RelatedI have Alltel Mobile Broadband. Up until the other day, it's been working fine. I'd set up a network on my macbook after connecting to the Alltel network, then I'd enable internet sharing. Then my iPod Touch, iPad, etc would all be able to go online.
The past couple days, however, the connection just won't share.Anyone have any idea what could be doing this and how to fix it?
when I open my Network in System Preferences, "Network settings have been changed by another application" pops up and every time I click Ok, it pops up again, not letting me be able to access any other option in the Network window. The wireless icon has disappeared from my top bar and the only way I have managed to get online is via my ethernet cable. I have had nothing but problems since I started using my O2 Wireless Broadband dongle and I've noticed that behind the "Network settings have been changed by another application" notification, I can seen the Dongle has appeared as a new network connection option... but was never there before today (have been using the dongle for two months now)
View 4 Replies View RelatedI've checked the used/free space GB, and out of 74, it is 45/30.
With 30GB free, shouldn't it be running normally ?
What could be causing it to run like this ?
I'm talking a minute to open a file, 30 seconds to open 'Print' in the 'File' menu.
I am trying to print wirelessly from my Macbook Pro to my Desktop running windows XP. The desktop is wired directly to the router and the printer, the macbook is wireless. I can enabled sharing on the printer on the desktop, and added the printer to my macbook. My problem is when I try to print It send's a signal to my desktop, the HP "ink level" pop up comes up, the printer shows spooling in the details then it disappears and never prints. I know I am close but have been messing with this for 2 days and I cant figure it out.
View 2 Replies View RelatedAll of a sudden out of nowhere, one, and only one PDF, will only print on 1/4 of a page. Everything else prints fine, other PDFs print to full pages, anything outside of Safari prints as it should--it's just this one PDF in Safari, it's driving me crazy. I've logged out, logged back in, restarted my MBP, even reset safari--and nothing at all. All printer settings/scaling are as they should be, and the preview shows a full page document, but what comes out of the printer is 1/4 page. Here's the PDF: It prints fine in FF, but for some reason it's coming out super light/blurry/grayscale/crappy, so it's no good.
View 10 Replies View RelatedI wondered if it was in anyway possible to print wirelessly from my MacBook. Seems simple enough right? Well, the thing is I don't have a wireless printer. It's a normal inkjet Epson and it's connected via USB to my desktop which is running Vista Home Premium. Is there anyway I can somehow forward the document to my desktop and it'll start printing? Oh yes, my router is standard, it doesn't have any USB ports. Also anyone know any wireless HDDs? Time Capsules rather pricey especially in the current climate.
View 3 Replies View Related