Hardware :: Using Airport Extreme And Connecting To XBOX Live?
Nov 14, 2010
I just purchased an Airport Extreme and it works wonders with our computers and phones, but when I tried setting up my XBOX 360 to XBox live I keep getting an error saying that I need to enable my UPNP to use all features of XBOX live. Anyone know how I can enable this on the Airport utility?
I apologize in advance if this has been answered before (I couldn't find an answer using search). I have an Airport Extreme wireless network in my home that works great. I just got an xbox 360 with the latest wireless adapter ("N" type) and when I try to set up the xbox to work wirelessly, the setup "fails" - xbox either can't "see" my home wireless network or else can't attach to it. Any suggestions how I can fix this problem?
I am a NYU college student and have my macbook pro (running snow leopard os) connected to the internet via ethernet connection. My mac is sharing internet through it's ethernet connection and my ipod, blackberry, and friend's computers can connect via it's connection. However, the same does not go for my xbox 360. I keep getting a message saying "unable to connect to xbox live because my router can't assign an ip address" I have tried unplugging my internet for 30 seconds but it still doesn't work...neither does a direct ethernet connection.
I recently had Fios installed and they provide a router/modem Actiontec M1424. I have it set up so I am still able to get wifi off my airport express since it provides faster wifi speeds. I am having a problem with xbox live.
I keep getting NAT moderate instead of open. I opened ports 3074 and 88 in airport utility but no luck. Is it because it is going through two routers?
Anyone have a similar setup and have an open nat? The reason I choose not to use the actiontec is because on live the connection is terrible but I have an open nat.
I have read before that people have had technical difficulties with the Airport Express and Xbox 360. I play on Live quite a lot, but get a poor connection from my old D-Link router, which often drops out. As soon as I get a new MBP, I will be getting the new APX Base recently released. Does anyone know if there could occur any problems connecting the Xbox and the AirPort base?
ive had my xbox 360 connected to my apple extreme base station (gigabte) connected via wifi, ive maybe had 1 or 2 issues but that was the xbox wifi adapter (had to plug it in the front usb then in the back to get it working again). I decided to hard wire the xbox to the base station so the gaming was faster, this was fine for maybe 48hrs. But then pow, when the xbox is on i lose the wifi function of my apple base station and no compute can connect to it in the house, turn the xbox off and it the wifi is restored. If i try to connect the xbox via the wifi adapter it also shuts down the wifi of the base station. Ive restarted and updated everything sooooooo many times. The only thing that happened the morning this kinda started happening is we had a power cut, the only thing that would of been on was the apple base station, no fuse was blown or anything. Could the power cause the router to mess up? Ive called xbox and they just took me through resetting stuff which works for 1 minute then i cant connect to xbox live and it all goes wrong again.
i have done everything. i have turned on upnp on my modem, as well as opening ports, so now i believe the reason why i have a strict nat would have to be my router. i have tried opening the ports, but to no avail. is there somthing i am not doing? i do not have a costum ip (forgot what its called) and i am new to this stuff. i dont want to have to pay geek squad 150 bucks, nor do i want to buy a new router.
I am trying to connect my xbox360 to the internet by sharing from my ethernet connection. I have the latest model xbox with built in wireless. Also my internet connection is pppoe because i am in Okinawa, Japan. It is NTT/OCN.
From what I've read there used to be a compatibility issue because the port the xbox 360 uses was blocked by default or something, but now with port mapping there is a way to get this to work in the newest airport extreme? What I don't want to do is have it connect to my computer and then xbox live, which I know is a workaround. I just want the xbox to work with the router directly.
setting up my xbox 360 with a xbox-live connection. I am planning on relaying my base station's internet connection to my express. Then connecting my express to my xbox via ethernet. if someone could inform me on the settings, for the xbox, extreme base station, and express.
does anyone here connect their xbox 360 to their airport extreme base station via wifi. I have read ways to do this, by turning the 'N' mode off etc. But i just want to find out more before i take the plunge into buying a xbox 360 and if you can do this with out changing from N mode. i have one of the latest 802.11n apple base station.
I have an Airport Extreme connected to cable modem. I also have an Airport Express for some reason. My 360 is in another room.. and while I have a long enough ethernet cable to hardwire it to the router, that's pretty inconvenient and doesn't really look that good. So my question is... how would the connection quality be if I connect it to the airport express? Is it like hardwiring it?
I bought my MacBook Pro and a brand new Airport Extreme to go with it about 4 months ago. I have the MacBook and my wife's iMac hooked up wirelessly to the Airport Extreme with no problems. My son't Wii also hooks up with no problems wirelessly. My Xbox 360 hooks up sometimes, and sometimes it doesn't. It's not wireless, it's hooked directly to the Airport Extreme via Ethernet cable. When I first got the Airport Extreme, the Xbox had no problem hooking up to it and the internet. But lately it sometimes hooks up, and sometimes it doesn't...with no explanation as to why other than maybe the position of the planets or something. Restarting the Airport Extreme helps sometimes, sometimes it doesn't. I'll just leave it be for a few days...change nothing...and then try the Xbox again and automagically it seems to work...for a few days. Then for no reason will just stop again. It can't connect through anything then, not even hook up to one of the Mac's using Connect360. It's as if the 360 is not even hooked to any network then. Also, the Xbox 360 had zero network problems when I was using a DLink router, which was the set-up to hook to the internet and the hub of the home network for the past year. The 360 could hook to the Macs and access the Internet. But the Dlink wasn't wireless, which is why I went with the Airport Extreme when I got my Macbook Pro.
I'm having issues getting my new XBOX 360 Slim to connect to my dual-band Airport Extreme when using wireless n. I can get it to connect with n but my connection speed on the 360 drops to 1 or 2 mbps, even though the signal remains strong. I can see the speed drop of the 360 using Airport Utility on my laptop. All other devices on the network are fine. When I switch the 2.4 GHz band on the AE to b/g only, then the connection speed on the 360 shoots up to 54 mbps. That of course neuters the rest of my wireless n devices to g speed since most connect to the 2.4 GHz band due to the limited distance of the 5 GHz band.
Short of finding a solution, my next step is to try a different router brand. I'd rather stick with Apple, but have had more issues with 2 AE models than all of my other Apple hardware combined.
I'm trying to use my AE (Airport Extreme) Base Station to give my xbox 360 wireless. Has anyone done this? My setup is as Follows: Netgear WGR614 v7 Router connected to my Cable Modem AE Base station connected wirelessly to the Netgears Network Xbox 360 connected via ethernet to AE. It's not working though. My AE gets an IP automatically from the Netgear fine, but the xbox won't connect. I have my AE on "Join Wireless Network" mode and it's LED is solid green but it still doesn't give the xbox any internet.
I have my AE set up in my office where three computers and two printers are picking up its signal just fine. However, I have a computer in another room that is only about 30 ft away from the AE router and sometimes the signal is very week while other times it won't connect at all. Yet, I can pick up other networks from other houses just fine.
OK I know this can be done and have searched many forums and I cannot find the whole walk through on the process!!!
I have the Airport Extreme one version back without the dual antennas and I'm trying to make up for that with my old linksys router. I want my airport extreme to transmit wireless N only! and my linksys to transmit wireless G only!! configuration setting to make this happen??
I own an AirPort Extreme (Dual-Band) and a MBP (2.2 SR). When I hold option down and click the AirPort icon in the menu bar, it shows the transmit rate and the channel its on. Mine says it's connected to channel 2 and I'm getting 104 TR. Why am I not connecting to the 149 channel?
I have a 1.5TB external HDD that I am using with my iMac. But I have just added a MBP, so now I have two computers that need backing up. I was thinking of time capsule, but someone suggested I just get an airport extreme and hang the 1.5TB drive off of that. Is that do-able? But also the MBP only has 2 USB ports (my old Dell had 4). If I got the extreme, could I split the USB port and have both a HDD AND a printer off the extreme? Now that I say this out loud (or type outloud), this seems unlikely, but I thought I should check.
I need to set up a Macbook Pro, Dell Laptop, and HP Wireless enabled printer to my home network. I have an Airport Extreme. Can this be done without having one of the computers hard-wired to the router?
My Airport Extreme network is working fine. The problem is that I'm sharing a hard drive which works fine with the Macs but my obligatory Windows XP computer won't see the hard drive. I have it connected to the network wirelessly and it shows as connected in XP Network places but how do I get it to see the hard drive which I have connected directly to the Airport Extreme Base Station?
I just bought my first Mac from ebay i'm a new user and don't know much about macs, I was using my ethernet to surf the web until my belking router comes in. So this is what I have done so far my desktop is wired to the router running XP the connection is fine and my setup is a WPA, my macbook is running 10.5.6 Lepord my router says the MB is connected to the router but I'm unable to connect to the internet. TCP/IP is set to DHCP my airport says status on, and that it has a self-assigned IP address and may not be able to connect to the internet I've already have my MB set to share web, internet, files & printers on my network. Is there something i missed or i'm doing wrong I called belking and got no problems with the router we used many setup changes and I ran a hardware test on my MB and no problems were found.
Trying to connect a new Airport Extreme Base Station to my iMac. Was hoping I could do so without connecting the AEBS to the imac via ethernet--is that possible? Why i try to do so, AEBS setup asks for my DHCP settings,etc.. If I connect AEBS to the computer via ethernet, will that work and will I be able to establish a network? Sure isn't going the way the "easy instructions" claim.
i've just got my sister a emac G4 1ghz i installed the airport extreme card from my G5 cos she wants it in her bedroom but it's not connecting to the router, my router is a Thomson TG585 V7 i never had this problem with old airport, it only seems to be with extreme although the card was connecting to the network from my g5 was basically inches away from it, the Emac is on the floor about 2ft away i goto connect and it just keeps timing out, i've made sure the wpa key is correct and even tried manually entering the network config details but to no avail, is there any hope?