OS X :: Internet Not Connecting With Full Signal Bars
May 27, 2009
I have the white macbook and I got it a little less than a year ago. For the past week, sometimes when I go on the internet (firefox or safari) it just won't load. Like the blue bar that shows you how much has loaded isn't even visible and it will just say "connecting". But when I look at my airport icon that shows me how many bars of internet I have all the bars are full so I have internet connection. It is not just one type of internet browser because it does it on both safari and firefox. And it is getting really annoying because I will be browsing the internet and it just won't load or connect at all. Even if I wait.
View 3 Replies
ADVERTISEMENT
Mar 15, 2012
so the other day i opened my computer and it wouldn't connect to the internet. it had been working fine before that and nothing had changed, it just stopped connecting. I have full signal and can connect to the network, but my internet signal on the top bar has an exclamation point and says "Alert: no internet connection." My roommates can both connect with their computers so i dont know the problem! i've looked for solutions on other forums and havet tried deleting "airport" as a source and then re-adding it, deleting the system configuration folder, renewing the DHCP lease, nothing works.
Info:
MacBook, Mac OS X (10.6.8)
View 2 Replies
View Related
Aug 23, 2010
all threads are outdated from 2006 and 2007 as far as I looked, or has a different issue. My macbook is a 2009 model running 10.6.4, using a linksys router, signal will drop for no reason. The bars are full, but nothing will connect. NO messenger, web browser, or downloading software will work, like its dead. This usually happens if I keep my computer on over night for huge downloads (1GB+).To fix this, I just have to click on the airport icon on the top right corner of my screen, choose disconnect, wait 3 seconds, then choose reconnect and it will work again.
View 2 Replies
View Related
Sep 4, 2014
Teaching in Netherlands. When connected to wireless, signal bars are full but Macbook does not display any page just a blank page. Itunes and App store both work fine.Â
My windows notebook and Android phone both connect to wireless.No proxy options are ticked.Ran the Assistant Diagnostics: Selected Wireless, Network settings, ISP, Internet, Server went green/red then back to green with messafe saying Network Change detectedRestarted routerRemoved wifi network and reconnectedRan wireless diagnostics, nothing shows up Renewed DHCP LeaseChecked the Ipv4 and Router address - both begin 192.168.178.xThere are two DNS Server numbers - checked both and they are related to the ISP
Dont have ethernet cable to check wired connection
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
View 5 Replies
View Related
Mar 4, 2009
This problem has been going on for a couple of months now. I use my macbook at 2 places: school and home. At school, when I click the school network under airport, it connects and shows the full bars. But when I open safari/firefox, the page won't load and I get the error message when you're not connected. However, sometimes after like an hour of persisting and retrying, it will be able to access the internet for a little bit for like an hour or so maybe, and then it'll stop working. At home, it's the same thing. It will connect to my home network (got wireless at home set up through my desktop PC), and show the full connection on airport, but it won't access the internet for the life of me. The difference is I can never gt it to connect unlike at school where it sometimes works, except that it worked for like one day out of the last 2 months (and I didn't change any settings then so it's not like I can attribute it to that). Also, I am absolutely positive that the networks of my home/school computer and the router settings etc. aren't to blame. Reason is that my friends with macbooks can access the internet both using my home network and the school network (the school one is obvious). What could possibly be going wrong? Any settings on my macbook that I can change / completely reset? Is the network card or something messed up? I'm contemplating just completely formatting my laptop to see if it fixes the issue. I have leopard installed btw.
View 1 Replies
View Related
Aug 18, 2010
Does anyone know how accurate the 2010 macbook pro wifi signal strength monitor is? There are times I have full bars but my internet is really slow, or stops working all together for a few minutes. I THINK, because I'm on a different floor than the router, which would explain reduced signal. BUT my computer says I have full bars.
View 4 Replies
View Related
Nov 4, 2008
So I just got my MacBook, mainly for school. The wireless service at my school requires a username and password so I went to the place and paid the 10 bucks for it. They said when you open up "Internet Explorer" (I chuckled) that a window would come up asking for your permission to continue or whatever and then you have to put in your username and password. When I join the network in Airport it says I have full bars however when I open up Safari or Firfox it instantly says that I'm not connected. What can I do so that it will ask me for my username and password so I can actually use the internet? I have gotten to the page where it asks me for my username and password before but I hadn't yet set up an account so I just exited out. Now I can't even get to that page! Hopefully there are some people out there that use the same type of wireless service at their college...
View 17 Replies
View Related
Feb 2, 2009
I have the 2.4ghz aluminum macbook, late '08. I go to a community college that is pretty large, compared to community colleges. I have full bars most of the time at school but about 50% of the time there is no connection. On mozilla i get an error to contact the server administrator and i just get a no network on safari. I installed windows 7 and there is also full bars but no connection. My friends, who have PCs, connect fine. There s a dell netbook and a 50lbs Toshiba laptop.
View 8 Replies
View Related
Mar 28, 2009
I have done some searches, but from the nature of my internet I hope you can understand if this question is a repeat, if so please point me in the right direction. I am using a August 2007 black macbook with airport extreme using 10.4.11 I am using a neighbors wireless network that is WPA. I live in Senegal and my computer is American, and I have heard that this might cause problems because of hardware. But the wifi connection works, it just bounces from full bars to no bars, spends a lot of time at 1 bar, and then when the connection drops and I try to rejoin the network, it says that there was an error. Sometimes, the network won't even show up. After long stretches of time trying to rejoin the network only to find an error, it will suddenly work. I have tried using interference robustness and relocating my computer. The router is just one floor above me, and when it was being installed (before they applied the pw) I had full bars. I think this is a mac problem because my host sister's PC does not seem to be experiencing problems. Also, due to the nature of the wifi (it belongs to my moroccan neighbors).
View 2 Replies
View Related
Feb 28, 2009
On my old PowerBook pro running tiger my network was running fine and fast using my Airport extreme. But I just purchased a MacBook Pro and started up on 10.5.6 and the airport if constantly scanning even though it has full bars on my home airport. I have tried the following one at a time and together without success:
- Changed the channel away from the neighbors
- Changed to g only instead of b/g radio mode (older airport)
- Increased the mbps rate
- Interference robustness
- Closed network
The only way the scanning stops and then only temporarily is by clicking on the airport drop down on the menu bar.
View 1 Replies
View Related
May 15, 2012
what is wrong with my 15-inch macbook pro, the only thing i did was installing 8 gb RAM, and suddenly out of nowhere my mac freezes and shows red bars and the white light is flashing while and alarm beeps
Info:MacBookPro, iOS 5.1.1, 15-inch 8GB RAM I7
View 1 Replies
View Related
May 26, 2009
I'm back at my dad's place for the summer and I'm trying to connect to his house's wireless connection on my MacBook. It seems to connect okay when I type in our 10-digit password next to "WEP 40/128-bit hex" in the drop-down menu, but then even with full signal bars, it loads browser pages very slowly if ever, usually just giving me a timeout error and it's the same thing across all programs, my instant messenger takes forever to connect, WoW takes forever to connect, if ever, basically the internet I get from this connection is useless. It's odd because both my sisters have MacBooks and the internet works fine for them at my dad's house when they connect, and MY internet on my computer works perfectly when I'm using any WiFi but this one. By the way, the transmitter is a "D-Link 514 2.4GHz Wireless Router" and we're connected to cable internet.
Update:
* I have tried resetting the router and that didn't help.
* I have tried changing the channel, authentication method and password and that didn't help.
* I tried a DNS troubleshooting guide and it doesn't appear to be a problem with that.
View 9 Replies
View Related
Jul 23, 2008
I cant connect my guitar to mac pro 08. I see the signal but dont sound. Please how I cant with software?
View 2 Replies
View Related
Nov 18, 2009
I just encountered this issue about 2 days ago on my 2009 2.66 GHz MacBook Pro 15. When I am connected to a wireless network my internet goes REALLY slow (30 Mbps wired vs 2 Mbps wi-fi), I cant even watch a youtube video anymore without waiting 5 minutes. My wi-fi signal is full and I am maybe about 15 ft away from my router. I have tried reinstalling OSX and restoring my router but nothing has helped. I also have a Macbook Air running on the same network and connected to the same Wi-Fi and my speed is normal (around 30 Mbps) so I know its not an issue with my router. All my computers are running the latest snow leopard and needless to say, I have zero programs or anything else running on the macbook pro because its on a fresh install of OSX. And just to be clear all these issues occur only when I am in Wi-Fi on the 15 inch, wired works normal on the 15 inch.
View 1 Replies
View Related
Oct 27, 2010
I have my AE set up in my office where three computers and two printers are picking up its signal just fine. However, I have a computer in another room that is only about 30 ft away from the AE router and sometimes the signal is very week while other times it won't connect at all. Yet, I can pick up other networks from other houses just fine.
View 5 Replies
View Related
Oct 4, 2009
When i connect my hdtv to my mbp via vga (using mini displayport vga adapter) I am only achieving a 1080i signal. I did some research and I found that there are two 1080 resolution options in leopard, one being 1080i and the other being 1080p, you simply have to turn the display options on in the menu bar and then select the one you wish to use.
With this new found knowledge i found the two resolution options and tried them however, I found that one of the 1080 resolution options outputted 1080i whilst the other outputted 1050, despite clearly saying 1080. This has me baffled! Is this due to me using a vga cable and has anyone had similar issues? Additionally, is it possible to achieve a 1080p signal from a mbp? Mine is the late 08 model if that makes a difference.
View 1 Replies
View Related
Sep 22, 2010
I have had my 15" i7 MBP for around a week now, and a handful of times (3 times last night) it just decided it doesnt want to connect to the internet.The WiFi Signal still says its connected full, and other laptops don't have an issue (not even my old 13" MacBook).I have tried changing the DNS to OpenDns and to Google's DNS but with no luck. The problem is intermittent, and it will be fine for a day, then it will just decide it doesn't want to work.
View 22 Replies
View Related
Mar 15, 2009
I am on a macbook. My wireless was pretty decent during winter break but when I come back for spring break, it is ridiculously slow. The signal strength is completely full, but its almost dial up slow. my wireless on my iphone is blazing.
View 9 Replies
View Related
Sep 11, 2007
I've recently converted to mac and replaced my 8 month old Vaio AR11s with a new white macbook(2.16ghz). Recently I am having all sorts of problems with the wireless. I've been reading this forum for a week of so now and realize that I am not alone with my WiFi woes. My problem is the fact that my wireless intermittently drops and although the signal strength is still showing full I have no internet connection until i turn off and on the airport card.. this happens on both psu and battery!
I have tried installing the 2007-004 update, deleting the airport.plist file and the 2007-002 update and it appears to fix the fault for a while but then it comes back. I' ve also messed with enable/disabling frame bursting,different channels on my netgear wnr834n router but my other mac(using ethernet, bought a 24" imac tuesday!) and wifes vista laptop (wifi 802.11g) are fine so I have ruled out the router.
View 24 Replies
View Related
Dec 9, 2009
I get internet from my neighbor next door, and where exactly about 18 ft. apart. I know that having a repeater or an external antenna can solve the problem but i cant afford those things right now. I know that on pc you can go to task manager and conentrate your bandwidth percentage to internet explorer, but is there anything like that i can do to my mac? also any other free way would be good too.
View 5 Replies
View Related
Nov 2, 2010
I have an ibook G4 1.42 ghz. It worked fine until recently. After connecting to a wireless network for a few minutes, it then begins to sporadically drop out. And after losing the connection, it can't detect any wireless networks. Turning off the card, restarting the computer, letting it sit for a few minutes... signals come in and out, but then drop again.
I'm using OS X.4, so this isn't a software problem, the OS, or caused by an update. The antenna also isn't faulty. The computer reads the card as being fully functional, but just doesn't detect any wireless networks. I've exhausted all software solutions and now can only conclude it's a hardware problem. Given the symptoms I've described, would the best idea be to replace the card altogether?
View 5 Replies
View Related
Jun 4, 2012
I am currently trying to connect my eMac - to the internet via a stick/dongle and cannot find the appropriate vodafone software to make it work.Software version 10.5 on the mac and have two internet sticks one - a Huawei K3770 and a K3571 both with VodafoneAny idea, please, on where I can download this software and anything else I can do to to make a connection to the internet?The Vodafone software runs yet does not see either device. The connection through ethernet is great.
Info:
eMac Ser:VM50102CQJ8, Mac OS X (10.4), G4 Processor, 1Gig Memory, EMC 2006
View 5 Replies
View Related
Nov 10, 2010
here's the run down: today I moved into a new place with two roommates. They have a wifi internet connection set up (modem + dlink router). I have been given all of the info regarding log ins and passwords. My Airport is telling me I have perfect reception and that I have a very strong signal. Yet, there is no internet (when I open Safari it tells me I am not connected to the internet). I've had this problem before, but it is usually resolved by restarting the modem or the router, by restarting my computer, etc. And here's the kicker: I am using, right now as I type, someone else's wifi connection... yet I accessed it with the same password. It's a very basic password (12345). I thought maybe this was our unit's connection, but I actually unplugged the modem and continued to use the internet with this connection. The problem is that this connection is very slow and rather useless. I'm actually able to use 3-4 of these with the same password (12345). One of them is called 'dlink,' the name of our router. But our connection is supposedly under 'Nicks,' my roommate's name).
View 1 Replies
View Related
Feb 28, 2009
i'm trying to setup a mini wifi hotspot in my shoe box of a bedroom. I have a mac pro, iBook and iPhone and i can't seem to get either the iBook or iPhone to connect to an "Airport Internet sharing" connection.
I thought it might be the thick aluminium box hampering the signal but i'm literally about 6ft from the MP tower and really shouldn't have problems from that range should i?
View 2 Replies
View Related
Feb 15, 2012
My internet keeps losing signal and will have to reset the internet on the computer, we thought it was but have changed to sky now and it still happens.
Info:
iMac, Mac OS X (10.7.2)
View 8 Replies
View Related
Nov 4, 2009
There are times that my signal are fading. What do I need to boost up my signal? I had an Imac Intel core duo which i bought last year.
View 7 Replies
View Related
May 24, 2012
Equipment: iMac 21.5" 2.5GHz Quad Core i5 Â
Internet Set-up: Cable modem to iMac EthernetÂ
Problem: After recent update to Lion 10.7.4, my Wi-Fi signal via Internet Sharing keeps dropping. Have multiple iDevices failing that were working perfectly with 10.7.3 (Nook and iPhone 4). iPhone shows full Wi-Fi signal strength and works for a short time after reset (via Wi-Fi off/on, Internet Sharing off/on). Continues to show full Wi-Fi signal strength but loses connection after 1-2 minutes. And not just internet connection; I can't transfer pics/vids from iPhone to iMac either. Have switched to a channel no one nearby is using (channel 9) to no avail.
Info:
iMac, Mac OS X (10.7.4)
View 4 Replies
View Related
Oct 14, 2010
Everytime I broadcast the ethernet signal to my ipod touch, my computer disconnects from the internet, every time i reconnect the internet, the laptop stops putting out the signal. It doesn't let the airport and the ethernet work at the same time.
View 4 Replies
View Related
Apr 30, 2012
I am having internet connection issues with my MacBook Pro 2011 - running the latest version of Lion OSX. My connection cuts out regularly (every 10 - 15 minutes) despite having a full wifi signal. It is happening on two different routers, in two different locations with two different ISP's.Â
When I run Network Diagnostics ISP is the test that fails, but after a couple of seconds diagnostics fixes it until the next 10 - 15 minutes. The only other alternative is turning wifi off and on. Both of these only last for the 10 - 15 minutes before it cuts out again.Â
It is very frustrating and research online seems to indicate it is a Lion issue. I have made an appointment with a genius, but browsing online it appears there is no solution. It is not acceptable.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 5 Replies
View Related
Sep 6, 2009
I am running ATT DSL Extreme 3.0 and have a Linksys WRT54G wireless router. I currently only get wireless in approx. half of my house, and the half in which I don't get it, will be needing it. So I am going to need to buy a range extender or wireless access point? I am a college student so I don't have a large budget, but I am looking for advice. Should I stick with Linksys and just buy one of their range extenders, or should I buy an Airport Extreme and hope the N signal is stronger? I am going to be sharing files soon when I get my Mac Mini HTPC setup going on in the living room to this from my other iMac's and MBP.
In summary, I am just not sure if it would be worth the extra $ for the Airport extreme or if I should just stick with the linksys.
View 23 Replies
View Related
