Trying to connect a new Airport Extreme Base Station to my iMac. Was hoping I could do so without connecting the AEBS to the imac via ethernet--is that possible? Why i try to do so, AEBS setup asks for my DHCP settings,etc.. If I connect AEBS to the computer via ethernet, will that work and will I be able to establish a network? Sure isn't going the way the "easy instructions" claim.
View 1 RepliesI've been using the AEBS with my PowerBook for the last two and a half years with no problems. I was able to set it up to work with my Verizon DSL internet service pretty easily and never gave it a second thought. Until now.
I recently moved, and of course I had to switch ISPs. Now I've got Comast cable internet. The technician came out and hooked everything up. My internet works just fine - so long as I have the ethernet cable plugged into the computer.
I've tried to set it up to work with the Airport but it's not working. I'm clearly doing something wrong (this is what I get for not paying more attention to how these things work).
I finally convinced a friend to get a Mac and bragged about how easy everything works. He got a new iMac (loves it!) and signed up for Comcast High Speed Internet. Now there is a new MacBook in the house so I explained that all he would need is the AirPort Express in order to share the internet wirelessly for both Mac's. I went to set it up and I screwed everything up, after hours of work I not only couldn't get the Express working, I had to leave him without even ethernet internet. That's really all the info about his setup I have at the moment. So I came home to examine my own setup which is very similar: we both have the same Comcast modem (Arris TM502G) except I have an AEBS and he has a Express.
So I came home to examine my setup, it has been a while since I set mine up but its been flawless wirelessly (I never used the ethernet before). So, I plugged a ethernet cable in to the AEBS and connected my MBP. Works great. So I want to try to cut out the AEBS and just connect via ethernet from my MBP to the cable modem, that's where I start getting IP address problems. When an ethernet cable is connected to the AEBS my IP address is 10.0.1.12 and works fine. When I cut out the AEBS and try to run ethernet directly from my modem to my computer my IP Address changes to 169.254.181.6 and I get an error message saying that "Ethernet has a self-assigned IP address and may not be able to connect" and sure enough, I can't. Network Diagnostics tells me to configure via DHCP and restart the modem, still no luck. As I was searching tonight I came upon some discussion about Comcast limiting MAC addresses or something?
We plug cable from the wall into our router, can I do this with the time capsule (extreme) / air port extreme base station?
View 6 Replies View RelatedI'm using an airport extreme (latest firmware) with 10.6.3 on a mac pro and a macbook pro. The mac pro is wired the macbook pro is connected via wireless.
I constantly have signal drops. While the airport extreme seems to stay online (green light is sold) the cable modem always resets itself.
I can't figure out if this is because of my Optonline service or due to my router (airport extreme). Cablevision states nothing is wrong with my cable internet connection and the issue may be with the router. I've tried three different modems from them and they've supposedly checked everything (wires, signal, etc). I still think it has something to do with them. I'm hesitant to try DSL as it is slower (no fios here yet).
I don't get how it can be the router if both my desktop and laptop lose connection to the internet at the same time if they happen to be connected online at the same time.
Is there anything I'm overlooking in regards to the airport extreme? Should I trash a particular preference or try a different setting?
I'm kind of desperate at this point since it is highly annoying to constantly get knocked offline more than 5 times a day.
My mom has a Compaq Presario CQ60 (here).
I just set up AX, and my iMac and Macbook Pro hook up to it wirelessly with ease. But the PC will connect, but refuses to connect to the internet.The network securtiy is WPA2 - Personal.
I've powercycled a few time, with no avail.
Is there a missing driver or something?
I have an aiport extreme card in my emac. It was installed around a year and a half ago and has workd fine until yesterday. it suddenly says that it is not configured. It also says the antenna cable is unplugged and that it is turned off. I tried to trouble shoot it with internet connection assistant which says cable is unplugged and aiport is off. I have taken the card out and reinstalled it and reattached the cable mutiple times to no avail. And yes, I know how hard it is to push in.
Info:
eMac (ATI Graphics), Mac OS X (10.5.8), 1 GHz powerPC G4
I have a cable modem from Motorola for my internet connection.
I'm planning to buy Airport Express so I can have a wireless connection for my MBP and iPod Touch.
Is it OK to connect Airport Express to my motorola modem ?
I have my AE set up in my office where three computers and two printers are picking up its signal just fine. However, I have a computer in another room that is only about 30 ft away from the AE router and sometimes the signal is very week while other times it won't connect at all. Yet, I can pick up other networks from other houses just fine.
View 5 Replies View RelatedOK I know this can be done and have searched many forums and I cannot find the whole walk through on the process!!!
I have the Airport Extreme one version back without the dual antennas and I'm trying to make up for that with my old linksys router. I want my airport extreme to transmit wireless N only! and my linksys to transmit wireless G only!! configuration setting to make this happen??
I own an AirPort Extreme (Dual-Band) and a MBP (2.2 SR). When I hold option down and click the AirPort icon in the menu bar, it shows the transmit rate and the channel its on. Mine says it's connected to channel 2 and I'm getting 104 TR. Why am I not connecting to the 149 channel?
View 1 Replies View RelatedI have a 1.5TB external HDD that I am using with my iMac. But I have just added a MBP, so now I have two computers that need backing up. I was thinking of time capsule, but someone suggested I just get an airport extreme and hang the 1.5TB drive off of that. Is that do-able? But also the MBP only has 2 USB ports (my old Dell had 4). If I got the extreme, could I split the USB port and have both a HDD AND a printer off the extreme? Now that I say this out loud (or type outloud), this seems unlikely, but I thought I should check.
View 3 Replies View RelatedI'm trying to connect a D-Link webcam to my Airport Extreme. Could someone give me basic instruction on connecting this cam to my router?
I've binged/googled for this, and although i found some instruction it really didn't base it on the D-link. and i'm not sure how similar it gets.
I just purchased an Airport Extreme and it works wonders with our computers and phones, but when I tried setting up my XBOX 360 to XBox live I keep getting an error saying that I need to enable my UPNP to use all features of XBOX live. Anyone know how I can enable this on the Airport utility?
View 1 Replies View RelatedI need to set up a Macbook Pro, Dell Laptop, and HP Wireless enabled printer to my home network. I have an Airport Extreme. Can this be done without having one of the computers hard-wired to the router?
View 3 Replies View RelatedMy Airport Extreme network is working fine. The problem is that I'm sharing a hard drive which works fine with the Macs but my obligatory Windows XP computer won't see the hard drive. I have it connected to the network wirelessly and it shows as connected in XP Network places but how do I get it to see the hard drive which I have connected directly to the Airport Extreme Base Station?
View 2 Replies View RelatedI just bought my first Mac from ebay i'm a new user and don't know much about macs, I was using my ethernet to surf the web until my belking router comes in. So this is what I have done so far my desktop is wired to the router running XP the connection is fine and my setup is a WPA, my macbook is running 10.5.6 Lepord my router says the MB is connected to the router but I'm unable to connect to the internet. TCP/IP is set to DHCP my airport says status on, and that it has a self-assigned IP address and may not be able to connect to the internet I've already have my MB set to share web, internet, files & printers on my network. Is there something i missed or i'm doing wrong I called belking and got no problems with the router we used many setup changes and I ran a hardware test on my MB and no problems were found.
View 9 Replies View Relatedi've just got my sister a emac G4 1ghz i installed the airport extreme card from my G5 cos she wants it in her bedroom but it's not connecting to the router, my router is a Thomson TG585 V7 i never had this problem with old airport, it only seems to be with extreme although the card was connecting to the network from my g5 was basically inches away from it, the Emac is on the floor about 2ft away i goto connect and it just keeps timing out, i've made sure the wpa key is correct and even tried manually entering the network config details but to no avail, is there any hope?
View 2 Replies View RelatedI apologize in advance if this has been answered before (I couldn't find an answer using search). I have an Airport Extreme wireless network in my home that works great. I just got an xbox 360 with the latest wireless adapter ("N" type) and when I try to set up the xbox to work wirelessly, the setup "fails" - xbox either can't "see" my home wireless network or else can't attach to it. Any suggestions how I can fix this problem?
View 7 Replies View RelatedI have just installed an Airport Extreme Card in my G4 iMac. I can't get it to connect to my wireless network via a Linksys WRK54G router. When I enter in my network name, it doesn't recognize my wep password. I have two PCs running fine off this network.
View 1 Replies View RelatedConnecting a router to Airport Extreme: Will it slow down the internet access to all the computers more? I wanna hook up my Mac Pro, iMac via Ethernet and my PowerBook will be wireless. Is it gonna effect my speed?
View 12 Replies View RelatedI have the newest AirPort Extreme that transmits simultaneously in 2.4GHz and 5GHz. It's been great. My speeds have jumped 2-3x what they were before I upgraded to this router. Now, I'm getting 28-30MB per second download speeds. Before this I was getting 8-10MB per second.
But, I have a problem. My MBP connects great to the AirPort Extreme (802.11n at 2.4GHz or 5GHz). One PC desktop works great with the AirPort Extreme (via Ethernet). And, I have another PC laptop connecting at good speeds (802.11g). But, I have one other PC that sees and connects to the Airport Extreme signal (802.11g) but nothing happens. It's like a garden hose with very little to no water. The signal strength is very strong and, again, the computer DOES recognize the signal. It's an XP desktop (4 or 5 years old) with an 802.11g card inside.
Any thoughts as to why I have this problem with this one computer? It connected fine with my prior wireless router. It's a new problem.
By the way, the Airport Extreme is setup with all of the normal defaults and "automatic" settings, WPA2, etc. My cable provider is Comcast and the router gets it signal from a new modem. There are no other
I need to know how I can set up a system so that I can use the printer and browse the internet wirelessly on the MacBook Pro and have the non-wireless PC connect to the internet and use the printer as well.
It sounds confusing, so hopefully one of you guys will be able to understand it and maybe quickly draw a labeled diagram to show me.
I currently have Qwest DSL and have the 2wire 2700 hg modem. I have attached the picture of it. I currently have a Windows XP computer that is now a 2 1/2 year old computer (blah it was a hand me down). The Windows XP PC is currently hard-wired to the modem. I now have the 802.11n version of the AEBS. This is going to be used for my current Macbook. I have an office downstairs so I will be doing wirelessly. I want to use the 802.11n only option with my Macbook. Also another reason I want to disable the 2wire built in wireless feature and have it replaced by the AEBS is because Qwest is not doing anymore firmware upgrades for the 2wire 2700HG modem. By the way, my family sometimes visit and use 802.11g only on the devices they use. I know AEBS supports that. I just hope 2wire wireless feature can be disabled without no issues. These are the things I am wondering:
1. Has anybody run a similar setup to mine? Any things I should consider? Any pros or cons?
2. Should I turn off the 2wire modem firewall and turn on the firewall option on the Airport Extreme base station or vice versa?
3. Should I leave alone the NAT feature on the modem be left alone?
4. Does this kind of setup have to be run in "bridged" mode?
That's all the questions I have for now. I hope someone can help with this. I looked and looked for a similar question to these questions but could not find a recent forum post to mine.
Reading through the forums I haven't got a clear picture on whether this idea will work, so I was hoping someone could clear it up for me. It seems to have been clouded by people having problems with Airport-connected drives in Snow Leopard.I want to partition a hard drive and connect it through USB to an Airport Extreme. Then I want to use each partition as separate Time Machine backups for my iMac and MacBook.1. If connecting a partitioned hard drive, will all partitions be accessible through Airport Extreme?2. Can I use partitions connected in this way as Time Machine backups?3. Will there be problems if both my iMac and MacBook try to backup to the Time Machines at the same time?
View 4 Replies View RelatedI have the full comcast cable package coming throught the HD Settop box at the moment.
My TV has recently died on me and is going to be repaired by Panasonic. I was thinking, in the meantime, is there a way to get my comcast signal onto my Mac so I dont have to buy another, temporary TV? Which sort of TV cards could accomodate this and am I going to run into any challenges?
I work in a number of different houses all with different computer settings, so I bring my computer everywhere. It is an iMac. I'm having trouble connecting via ethernet into the cable modem at one place. I can connect my xbox directly if I manually enter the IP and DNS info. I know that the service is comcast and the modem is an Arris. It wont detect an IP automatically, I have tried to enter the info manually and it says ethernet is connected with the ip blah blah blah....but it wont connect to the internet or anything. Anyone have any ideas??
View 2 Replies View RelatedOk, I feel like a doofus, but I need some help if someone is willing.
I bought an Airport Extreme and installed per instructions on the Mac partition. The Extreme replaces an Express as the base unit, the express now extends the range of the network (and is now connected to my stereo system). So, the "new" network that was set up has the exact same name as the old one when it was just the Express.
Everything works fine on the mac side. When I go to my Win XP side (Boot camp) it sees the network but says it cannot connect. To put is simply, I can't remeber what I need to do. I haven't had to mess with this stuff since I set it up almost 2 years ago. Do I need to set up a new network?... I am just drawing a blank. Is keeping the same name for the "new" network part of my problem?
I have an ibook G4 and an airport express and comcast internet. My ibook is currently wired to the comcast modem and i want to use the airport express to have wireless access to the internet and email.
reset the modem pushing the little button.
I went to the airport utility and followed the instructions until I got to the step where it asked for the "account name, password and optional service name provided by the internet service provider." I did not know what those were, as comcast only gave me an account number, no name or password. I did a chat with comcast and after an hour of trying to explain to her on chat what the airport express was asking for, all she could tell me was that I should just leave those fields blank. So I continued with the wizard that way and it went all the way through the set up and sure enough, my wireless networks menu shows that I am connected to my new network. But even though the airport express is connected to the comcast modem, I cannot get internet or send or receive email through it. So the airport express is working with my computer - I do have a wireless network - but the airport express is not connecting to comcast - that is all I can figure.
I just moved houses and stayed using the same internet provider (comcast high speed internet cable modem). I went to the new house and plugged in my macbook pro and it got on to the internet no problem using DHCP and an ethernet connection. Now I went to set up my airport extreme, and I set it using DHCP and tried to connect, and it just sits there when it tries to access a page. I was using in my old house an airport extreme linked to another using WDS so I could extend the range and it worked no problem. I tried on both of them just using DHCP and it doesn't seem to work. I tried doing a hard reset on one and setting it up using the assistant, and still no luck. I even programmed in the values that I get when I use my ethernet connection as a manual setting in the airport, and still no good.
am stumped as I figured DCHP should just work with the airport.. I do not use any domains/other routers yet, and I don't see what the problem should be. I am even getting the same issue when I did this with a linksys router. Is there something I can do to get this to work on the MacBook Pro/a preference to trash?
