OS X V10.5 Leopard :: Computer Stopped Connecting To Internet Even Though There Is Full Signal And Nothing Has Changed?
Mar 15, 2012
so the other day i opened my computer and it wouldn't connect to the internet. it had been working fine before that and nothing had changed, it just stopped connecting. I have full signal and can connect to the network, but my internet signal on the top bar has an exclamation point and says "Alert: no internet connection." My roommates can both connect with their computers so i dont know the problem! i've looked for solutions on other forums and havet tried deleting "airport" as a source and then re-adding it, deleting the system configuration folder, renewing the DHCP lease, nothing works.
I have the white macbook and I got it a little less than a year ago. For the past week, sometimes when I go on the internet (firefox or safari) it just won't load. Like the blue bar that shows you how much has loaded isn't even visible and it will just say "connecting". But when I look at my airport icon that shows me how many bars of internet I have all the bars are full so I have internet connection. It is not just one type of internet browser because it does it on both safari and firefox. And it is getting really annoying because I will be browsing the internet and it just won't load or connect at all. Even if I wait.
Does anyone know how accurate the 2010 macbook pro wifi signal strength monitor is? There are times I have full bars but my internet is really slow, or stops working all together for a few minutes. I THINK, because I'm on a different floor than the router, which would explain reduced signal. BUT my computer says I have full bars.
I cannot log into my account after having changed my password on the internet. I tried entering that same password on my computer mail account, but it won't work.
I connect with my MacBook Pro via ethernet to the internet. So far, I've never had a problem until a couple of days, I keep on loosing the internet connect. When clicking through diagnostics, ISP, Internet and Server show first organge then turn red. If clicking through the diagnostics, sometimes I am lucky and it shows a message saying "Network configurations have chnaged", when I click ok, I'm online again. But very often nothing helps and I have to re-start the router again.
I use an AirPort base station. My ISP requires a "compatible DOCSIS device" (cable modem). Which broadband internet cable modem is recommended for use with AirPort? (A list of the DOCSIS devices is here).
Info:MacBook Air, Mac OS X (10.7.3), 1.8 GHz Intel i7, 4GB 1333 MHz DDR3
I am using a Ralink wireless usb dongle, and I can pick up multiple networks in my area.I can connect to a local WPA2 network, using the shared key, but can't connect to the internet in Safari or any other program.I used to be able to access the internet with this very same hardware, using what I thought was the same software, though with an open network. When I look in network prefs at the device, called "ethernet eng3" (I think), it says "connected, but may not work because of a self-assigned IP", or something to that effect.
iBook G4 1.33 OS 10.5.8 1.5 GB of ram 40 gig hard driveÂ
I get a message that says that the disk is almost full. In disk utility, it states that 36 out of 37 gb of hard drive space has been used. However when I open the finder window after clicking on the hard drive (the first level showing applications, library, system, users), it only adds up to about 23 gb of space being used once I select calculate all sizes. It doesn't show me the other 13 gigabites that would add up to 36. I don't have the 10.5 CD's since I bought this off of ebay preloaded with the os.Â
I've already repaired drive holding the shift key upon startup. I've ran cocktail pilot mode to run scripts, repair permissions, empty cache, etc...I turned on invisible items using cocktail to see if I can find the extra gigabites to no avail.Â
It is not connected to the USB external drive. File Vault is off.Â
I just encountered this issue about 2 days ago on my 2009 2.66 GHz MacBook Pro 15. When I am connected to a wireless network my internet goes REALLY slow (30 Mbps wired vs 2 Mbps wi-fi), I cant even watch a youtube video anymore without waiting 5 minutes. My wi-fi signal is full and I am maybe about 15 ft away from my router. I have tried reinstalling OSX and restoring my router but nothing has helped. I also have a Macbook Air running on the same network and connected to the same Wi-Fi and my speed is normal (around 30 Mbps) so I know its not an issue with my router. All my computers are running the latest snow leopard and needless to say, I have zero programs or anything else running on the macbook pro because its on a fresh install of OSX. And just to be clear all these issues occur only when I am in Wi-Fi on the 15 inch, wired works normal on the 15 inch.
I have my AE set up in my office where three computers and two printers are picking up its signal just fine. However, I have a computer in another room that is only about 30 ft away from the AE router and sometimes the signal is very week while other times it won't connect at all. Yet, I can pick up other networks from other houses just fine.
all threads are outdated from 2006 and 2007 as far as I looked, or has a different issue. My macbook is a 2009 model running 10.6.4, using a linksys router, signal will drop for no reason. The bars are full, but nothing will connect. NO messenger, web browser, or downloading software will work, like its dead. This usually happens if I keep my computer on over night for huge downloads (1GB+).To fix this, I just have to click on the airport icon on the top right corner of my screen, choose disconnect, wait 3 seconds, then choose reconnect and it will work again.
When i connect my hdtv to my mbp via vga (using mini displayport vga adapter) I am only achieving a 1080i signal. I did some research and I found that there are two 1080 resolution options in leopard, one being 1080i and the other being 1080p, you simply have to turn the display options on in the menu bar and then select the one you wish to use.
With this new found knowledge i found the two resolution options and tried them however, I found that one of the 1080 resolution options outputted 1080i whilst the other outputted 1050, despite clearly saying 1080. This has me baffled! Is this due to me using a vga cable and has anyone had similar issues? Additionally, is it possible to achieve a 1080p signal from a mbp? Mine is the late 08 model if that makes a difference.
I have had my 15" i7 MBP for around a week now, and a handful of times (3 times last night) it just decided it doesnt want to connect to the internet.The WiFi Signal still says its connected full, and other laptops don't have an issue (not even my old 13" MacBook).I have tried changing the DNS to OpenDns and to Google's DNS but with no luck. The problem is intermittent, and it will be fine for a day, then it will just decide it doesn't want to work.
I am on a macbook. My wireless was pretty decent during winter break but when I come back for spring break, it is ridiculously slow. The signal strength is completely full, but its almost dial up slow. my wireless on my iphone is blazing.
Is it possible to access the Internet using another computer connected to it. Reason be that we sometimes have only access to a UMTS network, and since we only have one stick it would be nice if the other computer in the network could surf over the one connected to the UMTS network.
Info: MBP, MM, MBP - 10.6 + Windows XP on a hard partition
I've recently converted to mac and replaced my 8 month old Vaio AR11s with a new white macbook(2.16ghz). Recently I am having all sorts of problems with the wireless. I've been reading this forum for a week of so now and realize that I am not alone with my WiFi woes. My problem is the fact that my wireless intermittently drops and although the signal strength is still showing full I have no internet connection until i turn off and on the airport card.. this happens on both psu and battery!
I have tried installing the 2007-004 update, deleting the airport.plist file and the 2007-002 update and it appears to fix the fault for a while but then it comes back. I' ve also messed with enable/disabling frame bursting,different channels on my netgear wnr834n router but my other mac(using ethernet, bought a 24" imac tuesday!) and wifes vista laptop (wifi 802.11g) are fine so I have ruled out the router.
the xp laptop cannot access the wireless internet and the router is too far away to use.Therefore i'm wanting to share my mac's internet with the xp laptop via an ethernet cable.I've searched for hours and I cannot find the correct way to do this.
I get internet from my neighbor next door, and where exactly about 18 ft. apart. I know that having a repeater or an external antenna can solve the problem but i cant afford those things right now. I know that on pc you can go to task manager and conentrate your bandwidth percentage to internet explorer, but is there anything like that i can do to my mac? also any other free way would be good too.
I have an ibook G4 1.42 ghz. It worked fine until recently. After connecting to a wireless network for a few minutes, it then begins to sporadically drop out. And after losing the connection, it can't detect any wireless networks. Turning off the card, restarting the computer, letting it sit for a few minutes... signals come in and out, but then drop again.
I'm using OS X.4, so this isn't a software problem, the OS, or caused by an update. The antenna also isn't faulty. The computer reads the card as being fully functional, but just doesn't detect any wireless networks. I've exhausted all software solutions and now can only conclude it's a hardware problem. Given the symptoms I've described, would the best idea be to replace the card altogether?
I am currently trying to connect my eMac - to the internet via a stick/dongle and cannot find the appropriate vodafone software to make it work.Software version 10.5 on the mac and have two internet sticks one - a Huawei K3770 and a K3571 both with VodafoneAny idea, please, on where I can download this software and anything else I can do to to make a connection to the internet?The Vodafone software runs yet does not see either device. The connection through ethernet is great.
Info: eMac Ser:VM50102CQJ8, Mac OS X (10.4), G4 Processor, 1Gig Memory, EMC 2006
here's the run down: today I moved into a new place with two roommates. They have a wifi internet connection set up (modem + dlink router). I have been given all of the info regarding log ins and passwords. My Airport is telling me I have perfect reception and that I have a very strong signal. Yet, there is no internet (when I open Safari it tells me I am not connected to the internet). I've had this problem before, but it is usually resolved by restarting the modem or the router, by restarting my computer, etc. And here's the kicker: I am using, right now as I type, someone else's wifi connection... yet I accessed it with the same password. It's a very basic password (12345). I thought maybe this was our unit's connection, but I actually unplugged the modem and continued to use the internet with this connection. The problem is that this connection is very slow and rather useless. I'm actually able to use 3-4 of these with the same password (12345). One of them is called 'dlink,' the name of our router. But our connection is supposedly under 'Nicks,' my roommate's name).
i'm trying to setup a mini wifi hotspot in my shoe box of a bedroom. I have a mac pro, iBook and iPhone and i can't seem to get either the iBook or iPhone to connect to an "Airport Internet sharing" connection.
I thought it might be the thick aluminium box hampering the signal but i'm literally about 6ft from the MP tower and really shouldn't have problems from that range should i?
My internet keeps losing signal and will have to reset the internet on the computer, we thought it was but have changed to sky now and it still happens.
Problem: After recent update to Lion 10.7.4, my Wi-Fi signal via Internet Sharing keeps dropping. Have multiple iDevices failing that were working perfectly with 10.7.3 (Nook and iPhone 4). iPhone shows full Wi-Fi signal strength and works for a short time after reset (via Wi-Fi off/on, Internet Sharing off/on). Continues to show full Wi-Fi signal strength but loses connection after 1-2 minutes. And not just internet connection; I can't transfer pics/vids from iPhone to iMac either. Have switched to a channel no one nearby is using (channel 9) to no avail.
I was working on some home work in window Xp and I got the BSOD!!!well I lost my work, but there was a back up that god, know this happened while i was scrolling my mouse, and playing music in itunes as the computer stopped itunes stopped and crashed, Strange?I got a Screen shot of the screen and I'll post it, if any one has a suggestion to help stop this then by all means please help me I suck at windows
Everytime I broadcast the ethernet signal to my ipod touch, my computer disconnects from the internet, every time i reconnect the internet, the laptop stops putting out the signal. It doesn't let the airport and the ethernet work at the same time.
