Hardware :: Using An IMac As Display For Another Computer?
Jun 12, 2010
I got a nice shiny Windows 7 Asus laptop with Radeon 5780 and good processor. The only thing I don't like about it is the small screen; cause for me, good graphic cards mean nothing if the quality can't be displayed properly.
I successfully installed a game and played it on the Asus pretty fine, and I'm wondering if I can plug in my Asus laptop into my iMac and use it's superior display, and keyboard, too. Could I just download some program and put in a USB or something? I don't want it to be laggy, either
View 1 Replies
ADVERTISEMENT
Nov 21, 2009
I have a dual monitor setup at present with a 24 inch iMac (waiting for my 27" i7 to arrive) and a 23 inch Cinema display. The problem is that the height of the Cinema Display is much lower than my imac, I currently have it sitting on a couple of metal Oakley sunglasses cases to raise it to the same height as my iMac 24" but it looks messy - does anyone have any great solutions for raising the height of the 23 inch cinema display to align with an iMac 24 or even better 27?
View 1 Replies
View Related
Jun 22, 2014
My screen display is larger than my computer screen. How do I fix this.
View 2 Replies
View Related
Jan 16, 2009
1 "Put the computer to sleep when it is inactive for.."
2 "Put display to sleep after..."
3 "Put Hard Disks to sleep when possible..."
I'm guessing that #1 won't spin down the Hard Disks unless #3 is checked? Is that right? I'm also guessing that if I'm downloading a file or securely deleting the trash my iMac won't go to sleep? The reason I ask is because it seems like if I'm deleting the trash and my display goes to sleep, when I come back to the computer i really don't see any progress. What options do you guys typically use? I keep my iMac on 24/7, but didn't know about the first sleep option.
View 3 Replies
View Related
Jun 4, 2012
I have an 13" MBP that I ordered new in April, 2012. It is running Lion. I have an external monitor that is capable of 1440x900 resolution. I have an external keyboard and trackpad hooked up, and I like to close my MBP up and stick it in a BookArc. I want to be able to have the internal display disabled and to have the MBP only allow me to put windows on the external display, so long as the lid is closed. I also want to be sure that I am taking advantage of the resolutions available on my external monitor, which are higher than those supported by the internal display (specifically 1440x900).
This doesn't seem to work because I either have to allow the MBP to continue to draw my desktop across both screens (internal and external), OR use the "mirror displays" mode, which restricts my resolution of my external monitor. This means I either forgoe the additional resolution benefits of my external monitor, or I end up with windows that fall off-the-cliff, so to speak, because they are drawn in the portion of the desktop that would be shown on my internal display (which is closed).
I've read the community support pages on using the MBP with an external monitor, most relevantly, this page. It simply recommends using the "mirror displays" option. However, this option, as I mentioned above, doesn't allow me to make use of the additional resolution, and my external display looks bad. how to keep the 13" MBP in closed clamshell position, with the internal display disabled, and use my external monitor at resolutions higher than those allowed by the 13" MBP but which are available to my external monitor when not in "mirror displays" mode?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3), External display (1440x900)
View 1 Replies
View Related
Jun 24, 2012
I am wondering that is it essential to connect power adaptor all the time while operating in closed calmshell mode? When I unpluged the cable it didn't work. Is there some way?
Info:
MacBook Pro, iOS 5.1.1
View 3 Replies
View Related
Dec 24, 2009
The title says it all really... Quite a simple problem that I can't find any answer to!
I've hooked up my 30" Apple Cinema Display to the new iMac 27" and the highest resolution I'm getting as an option is 1280x800... The iMac correctly detects the ACD as a Cinema HD display but limits my resolution. Why oh why?!
View 2 Replies
View Related
Sep 22, 2009
i am having a weird problem with my brand new imac.. I bought it custom made last friday with ATI Radeon HD 4850. Now here is my issue.. Every time i boot up it takes a while for the screen to turn on. I hear the start up sound and HDD working and all that but screen stays off for another 5+ sec. before finally going grey before apple logo comes up. Now I thought this isn't an issue since i did order it with ATI card instead of standard Nvidia. Figured different cards react differently. However, later on after playing a game for few hours and doing a restart it would do the same thing, but the screen would never turn on. Just stay black forever until i shut it down and wait a minute or two then power it back on. So to clear this up. What happens is, i push power button, start up sound happens, then black.... like it is off, not even the back light. This only happens every few days, not every restart.. I reset SMC, PRAM, ran hardware test, spoke with apple on phone, went to genius bar, and after all that and being passed around now the apple engineers are looking into my problem and i am expecting a call back from them. So i guess my question is, is there anyone else with this setup (ATI Radion) that has this issue?
View 2 Replies
View Related
Dec 1, 2014
I have a new 27" iMac retina display. Is there any way to use it as an external display (since it does not support Target Display Mode)?
Info:
iMac with Retina 5K display, OS X Yosemite 10.10.1
View 1 Replies
View Related
Jan 23, 2008
Just wondering if anyone could help me figure this out.
I have my 40" flat screen plugged into my imac via VGA cable to mirror the image.
I'm just trying to have the imac display sleep while I play a movie full screen through the external TV.
I've tried two different ways but both have failed.
1-I set up a hot corner in the imac to sleep display but this results in both the display and the TV sleeping.
2-I just set the power settings to sleep after 1 minute. This works but then If a movie is playing the computer won't go to sleep.
View 4 Replies
View Related
Jul 12, 2010
Purchased a brand new 27" i7 imac a few weeks ago, display is awesome!!! I was using my old 28" LCD monitor from my PC and running dual displays on the iMac. The 28" LCD monitor annoyed me a bit because i could not get the same color/crispness/brightness that i got from the iMac. ( also it has a Matt screen and i am more into the glossy screens ) So i found a used 24" cinema display locally. Paid 600.00 and it came with 2 yrs of AppleCare. It is only 7 months old ( still have 5 months under orignal warranty ) Got home, hooked it up and it had a "hint" of yellowness to it, It wasn't a exact image of my iMacs display...I tried to calibrate it also, but it still had just a HINT of yellowness....Nothing at all major, but enough for me to be annoyed with it.
View 6 Replies
View Related
Jan 13, 2010
I just purchased a 23" monitor to replace my iMacs 17" display (since it has a nasty crack in one of the corners). I hooked it up fine and all, but the displays are linked, allowing me to hover the mouse to the iMac's display which I find annoying most of the time.
Is there a way to make the iMac display zone out and just use the external by itself?
View 3 Replies
View Related
Oct 30, 2009
The new IMac 21.5" doesn't fit on my desk. I bought an ikea computer desk that has shelves and a place for the monitor. These new widescreen IMacs, don't fit while the old 20" did!
View 23 Replies
View Related
Sep 15, 2009
As you can tell by the thread title I've got one of the latest model iMacs and I'm running an LED Cinema Display as a second monitor. When it gets to the late hours I like to watch some movies on the Mac so I figured the Cinema Display would be a nice addition to do the job.
Now here's my issue: if it's late and I'm watching movies I tend to not have any lights on, but having one of the displays on means having both of them on, what I'm wondering is if it's possible to sleep one display while allowing the other to stay active so I can watch the movie without the light from the other one distracting
View 6 Replies
View Related
Nov 10, 2009
I'm interested in the new iMac but could not work with a glossy display. Can anyone share their experiences of using the iMac with an external display? In one respect it seems like a waste to have two monitors but the base model costs little more than the maxed out Mini and seems like the better option.
I would be interested in seeing photos of any setups featuring the iMac and an external display.
Also, is there a way to turn off the iMac display when using an external display?
View 2 Replies
View Related
Mar 4, 2010
Why does it seem like my eMac display looks nicer than my iMac display? I always wanted to know or am I tripping?
View 14 Replies
View Related
Jul 31, 2010
just got myself a new 21.5" imac and use to have 19" dell monitor but i sold that and wanted to know if there are any 21.5" monitors out there that look like imacs with a imac stand and black glossy border
View 9 Replies
View Related
Jun 4, 2008
When I turned on my MacBook today, the screen was very dark. The computer is fully functional, but it is very difficult to see anything. It almost appears like the screen is set to a negative filter, with light colors looking dark. I have tried to adjust brightness, colors, display setting etc. I'm assuming the problem is with the connection between the display and the rest of the computer.
View 5 Replies
View Related
Jul 27, 2010
Is the new 27 inch cinema display any different the the displays on the 27 inch iMac??
View 4 Replies
View Related
Oct 1, 2007
I've set my energy saver preferences to put the display to sleep after 10 mins and the computer to sleep after 15 minutes of inactivity. The display sleeps but the computer always stays on, whether on battery or A/C. What's the problem here?
View 12 Replies
View Related
May 8, 2009
So I've recently connected my MacBook to an external display (a TV actually). Obviously, when I close the MacBook's screen the computer goes to sleep. How do I stop this from happening? I checked in 'help', it said that if I connected the monitor to the computer after closing the display, the computer would continue to run with the display closed. I've already connected it all though (running cables through cabinets, etc.) and I don't really want to undo all of that! Is there an easier way to set the computer to stay on (as opposed to entering sleep mode) when the display is closed?
View 3 Replies
View Related
Aug 4, 2010
I have a 2 year old aluminum (not uni-body) 15" Macbook Pro. Today when I turned on my computer, the front light went on, I heard the hard drive spin but the screeen remains completely black.
View 3 Replies
View Related
Mar 5, 2012
I have a macbook pro purchased last June. Want to connect an external display and the only option is usb. Apple does not make a minidisplay to usb adaptor and I can not find one on line. Computer will not recognize the display connected directly to the usb. What can I do?
Info:
MacBook Pro
View 7 Replies
View Related
May 14, 2012
After several years of working properly, my display suddenly doesn't recognize the mac when starting up. If I turn off the power strip, turn back on and restart, the computer it works fine.
Info:
Mac Pro (Early 2008), Mac OS X (10.5.8)
View 1 Replies
View Related
Jun 18, 2012
Is there a way to show the computer name in a FInder window? I sometimes open windows to other computers on my home network and copy files. It can be confusing as to which computer a particular window is connected to.
Info:
Mac Pro, dual quad-core, Mac OS X (10.6.4), Power Mac G4, iPhone 4
View 3 Replies
View Related
Aug 24, 2014
When I power the computer up, screen lights, but the computer does not boot up?
Info:
MacBook Pro, Can't check operating system
View 1 Replies
View Related
Aug 31, 2014
I have a 2008 non-unibody MacBook Pro. When I boot the computer, sometimes the display does not turn on. I've tried using the flashlight technique, and there isn't even anything on the LCD. I know the computer is on because it makes the chime and if I enter my password I can adjust the volume and play music. Occasionally, resetting the SMC will fix the issue temporarily, but it doesn't always work. What should I do?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 5 Replies
View Related
Oct 13, 2010
Recently ive been having a couple of issues with my mac; the thing is i havent used it in a few months.
anyway lately when i have been using my computer if i dont use it for a few minutes it will freeze, causing me to force it to shut down. and the other issue is kinda hard to explain but for some reason when i am gaming the picture has been acting up lately; i can see almost perfectly fine but there are vertical lines all over the screen - about 2cm long...the lines only seems to pop up on 3d imaging.
i have an iMac PPC G5 with 512mb ram
like i said i have not used this computer in a while
View 2 Replies
View Related
Jan 20, 2010
I've just bought a Dell 2209WA. I'm struggling a little with colour profiles and monitor setting, not sure which is the best thing to do. I'll be working with some things that need to be printed out and some that are for web only. So I'm guessing I'll need to use different colour profiles depending on what I'm doing, is that right? Can anyone recommend some to me?1. Is it possible to close my macbook pro yet still have it working through my monitor? I have a wireless keyboard so it'd be preferable if I close close the mac and run the monitor from it.
View 3 Replies
View Related
Jun 24, 2012
my computer will not display using the fire wire / hdmi cable what am i doing wrong
Info:
MacBook Pro, Mac OS X (10.7.4)
View 1 Replies
View Related
