Im thinking of setting up a AirPort Express or Extreme, unsure which i gonna buy, anyway, i thought id come here and post before going to shops and getting it (due to there isnt a apple shop within 4 hours drive )
I have my internet running through a USB wireless thingy (Sorry)
and i was wondering how/ if i could set it up running through that.
I'm having friends stay with me for a few weeks and want to set up the AE to limit the speed of internet available so they don't stream video all day (I have a data cap)
View 2 Replies View RelatedI've an Internet key (settings requested: phone number/web address/primary DNS): I put only the first 2 because with the third one (needed to speed up the connection) it doesn't works. I put the primary DNS requested on MACUSBmodem (DNS page, on the left).
View 4 Replies View RelatedI currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
Setting up the bluetooth so that I can use my mobile phone to access the internet on my mac. I have an LG phone but there isn't an LG option in the dropdown bar, does LG perhaps have another name that's in the list. Also what do I put in the username, password and phone number sections? I have tried to do it but it has failed.
View 3 Replies View RelatedI just found an old mac in my room, I think it is a power mac g4, it is running OS X 10.3. I am trying to get it connected to the internet using a cable straight from it to my router (netcomm), the same way i do with my other mac. However, no matter how many different variations i use of my various settings, it wont connect. I have come down to needing a subnet mask, IP address, and router address.
I am almost certain i have the subnet mask and router addie correct, but there seems to be no way for me to find the g4's IP. I have been in system preferences, but all the 'IP' bits are just blank and unclickable. I don't know if it makes a difference, but the G4 was connected to the internet in the past before we upgraded, so it should have an IP somewhere, right?
Is this possible? I use my wireless connection at home and at school. In home I use google dns however in school I cannot use any dns it is not allowed. For this reason I add and delete dns adresses everytime. It is quite boring. Is there a way or application that allow me set different dns adressses for different network connections?
View 3 Replies View RelatedI Have a linksys Wireless-G router (Model WRT54G) that's already hooked up to one PC & I'd like to hook my new Mac Pro to it. Is it possible?
View 2 Replies View RelatedI can't seem to connect to the internet using my ethernet cable. I messed around with some of the ethernet settings but now forgot what was the default one. The strange thing is, when I go into windows mode, the ethernet cable works. its just in Mac OS mode it doesn't.
View 1 Replies View RelatedOn the Bestbuy website they market the airport extreme as having the capability to become a range extender and the guy in the store said it would work with a linksys. The Linksys is a WRT150N. I have the airport extreme set-up in my room and it has a solid green light. When I go into the set-up for it I click join network and It sees the linksys and I select it and it says everything is working fine but it stays on the green light and the signal isn't being extended.
View 2 Replies View RelatedQuick question does anyone know how to set the Airport Extreme to wireless N only? I understand it will be wireless N only if I connect to the 5 ghz band. Problem is my Netgear Wireless N Bridge is 2.4 ghz only, and when it connects to the Airport extreme for some reason it only connects at wireless G. I do not see an option in Airport Utility for it to broadcast in Wireless N only. My options are 1) Automatic 2) 802.11a/n-802.11b/g 3) 802.11a-802.11b/g
View 24 Replies View RelatedI need help from someone please. I just placed and airport card in my ibook g3. I am running os 10.2.8. I am using a linksys wrt54g router. I turn on the airport. Then I attempt to connect to the name of our network and type in our password. I end up getting a message stating that the password entered in not correct for the selected airport network.
View 5 Replies View RelatedI have an airport extreme base station and I heard you need a modem to connect it to, I have a bt homehub and need to just get the internet setup. I can't seem to set it up how hard I try. It shows this when I try to plug it in without the bt hub [URL] and I dont know if I have a modem or not?
View 1 Replies View RelatedI've come home from college for the summer and set up my PC and iMac in my bedroom. However, the wireless signal from the router in the basement (a cisco m10 wireless n router) is very weak and cuts out frequently. I have an Airport Express and was hoping to use it as a wireless repeater/range extender, but can't seem to figure it out. I know there is no "official support" for use as a repeater with non-Apple routers, but is there a way around this? If so, how can I set up my network?
View 1 Replies View RelatedI recently got a new time capsule but I have difficulties setting up the internet connection. The time capsule is connected to our WAN using a cable in my office. The computers in our organization are authenticated using their MAC address. So, I have to add the MAC address of the time capsule to make it connected to the internet. I want to connect the TC to our WAN using a cable, then I want to connect my MacBook using a wireless connection to the TC.
When I config the TC using the NAT mode (Share a public IP address), I can use the internet but I get a double NAT error and TC's LED is yellow. When I config the TC using the Bridge Mode, the led goes green. Anyway, if I connect my MacBook using wireless I cannot reach the internet. I get no error in this case so I don't know what is happening inside the TC. Interestingly, if I connect the MacBook to the TC using an ethernet cable, it works perfectly! I have added all the MAC addresses of the wired and wireless interfaces to the list of my computers.
Does anyone out there is able to guide me thru the step on setting up a 2Wire all-in-one router with the AirPort Extreme base station? I was reading from somewhere, they were saying like i need to bridge the 2 router together or something.
View 2 Replies View RelatedI just purchased my new Airport Extreme (draft-n) and setup was relatively easy when building a simple network. However, after discovering that the Extreme cannot cover the whole house, I've been wanting to use my old Asus WL-530g router as a base and the Extreme to extend the network, or vice versa.
I've tried using the Extreme as the extender to the Asus's network but it gives me this message: "You cannot extend this network"
What can be the problem?
Are there any alternative ways to extend a network?
Can I use the Asus itself to extend the Airport network?
I then whantet to reconnect my Airport Express, witch i use for music in the living room.But i couldent for the life of me find out how to do that, so i thougt, ill just reset the thing, and set it up again.But this is where the problem starts.Every time i try to connect to the Express via the wifi list, the Airport Utility starts up fine, and starts the setup, but then crashes...!It dose this every time, at the same place, when it says "reading previous settings". Im running an iMac with lion 10.7.3 and Airport Utility is version 6.0.
[code]...
I'm trying to set Airport Extreme as a wireless access point, but having some problems with it. My current setup is as follows: Time Capsule as the main router. Connected to my cable modem, and all computers connect wirelessly to Time Capsule. Two Airport Expresses connect wirelessly to Time Capsule. "Join a wireless network" and have selected "Allow Ethernet Clients" I want to have Airport Extreme do the same thing that Airport Expresses are doing, and have it connect wirelessly to Time Capsule. I have some ethernet required devices that need to be in another room. Can this be done? I set Airport Extreme exactly same as Airport Express, but do not see "Allow Ethernet Clients" checkbox.
View 3 Replies View RelatedI have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different EQ setting to sound just right. Does anyone know of a way to have iTunes automatically change its EQ setting based on which Airport Express it is streaming to?
View 1 Replies View RelatedMy question is:
I have an airport- but due to construction in the place where I recently moved to...there is no internet.
However, I want to connect my Hp printer which is designed for wireless printing but needs to be connect to airport, and I want to plug in one of my hard drives to the airport to use wirelessly.
I don't know how to reconfigure my airport without internet. Is it possible?
For one of my Macs, I want to disable the internet only but still want to be on the LAN. How do I do this?
View 5 Replies View RelatedSince I have installed Snow Leopard I can't use the function in internet sharing that allows you to share your connection from ethernet to computers using Airport. Has anyone else had this problem? Anybody have ideas for a fix?
View 16 Replies View RelatedDoes anyone know anywhere online that has step by step instructions (or could provide some) on how to set up my ABS to go into bridge mode. The wireless modem/router I use is in the other room, and I would like to connect my Xbox 360 online, and figured I would just bridge the ABS and connect it to that.
I am having lots of problems doing this, and it's hard to find online how to exactly do it.
Internet works fine on iPhone but not on MacBook pro airport says fully connected but Bo Internet. What to do I've searched all over and tried diagnostics
View 3 Replies View RelatedMy trouble is this:
i am currently connected to a wireless network.
i want to share this network with my ipod touch
is there a way using the computer's built-in internet sharing or a 3rd party app that i can have my ipod touch connect to my macbook, while my macbook is connected to a wireless network?
I have a macbook pro and I usualy plug an ethernet cable in it to go on the internet. I just bought an airport express to use the wireless mode.
I copied the exact same settings in airport utility, in the internet section and it dosent work.
Same ip adress, same subnet mask, same router adress, dns servers.
I put COnfigure Ipv4 Manualy
Ethernet WAN Automatic
Connection Sharing BRIDGE
I've had my Mac for 3 years and never had a problem with Airport Express. If I did, I would usually turn it off and then on again and it solved the problem. The last two weeks I've been using a wi-fi hotspot near my home until I get a proper internet connection at home. Suddenly, my internet stopped working. The airport recognzies the link and still connects but the internet page says i'm not connected to the internet. I've tried using diagnostics and it says it can't fix my problem. In diagnostics, the first 3-4 lights turn on, but the last two are either yellow or red. I've changed the time to make sure it was correct, I've re-started the computer several times and it still doesn't work. I don't know what it is that is not working. The airport recognizes the signal, yet I get no internet connection. And I haven't downloaded anything recently.
View 2 Replies View RelatedI'm having problems with my connection to the internet. Either in Snow Leopard or in Windows (Bootcamp), sometimes it says that I'm connected, but I have no internet access.
Most of the time everything works as normal, but at least 4-5 times a day the problem presents and I can't access any webpage, tho it do says I'm connected to my Airport Extreme.
Same thing happens with my iPod, at the same moment. So it must be something with the AE, but I'm completely lost as to what it is.
I bought a 27" iMac about two months ago, and recently it's been having trouble connecting to the internet via airport. Sometimes it has no trouble, other times, no matter how many times I put in my WEP password and hit connect, it just gives me the 'connection timeout error'. Basically, our whole household was having internet troubles about a month ago, but they mysteriously stopped for everyone else except me after a week or two. My housemates all have PC's, and are able to connect fine now. I also have a MacBook as well, which also has no trouble picking up the wireless. One of the weird quirks about this problem is that if my MacBook is connected and moved to sit right next to my iMac, I can often get the iMac to connect. And if it drops the connection, I can refresh a page on the MacBook and suddenly the internet works again on my iMac.
And I also discovered that if I move my iMac to the right about 30cms, it sometimes connects. This suggests that maybe I'm out of range for my wireless, but how am I able to connect at other times when the iMac in it's normal place? Anyway, I've ruled out a fault with the wireless itself, because, as I mentioned, every other computer can connect fine. I've also tried going into the system prefs and renewing the DHCP lease, which *sometimes* works, but usually doesn't. It has been connecting fine for about 2 days, but tonight it started acting up again. It's connected now, but it's pretty sporadic and keeps dropping the connection. In case you need to know, it's one of the new 27" iMacs, the usual duo core not the quad core. 4gb memory, etc.
