Hardware :: Time Capsule - Setting Up Internet Connection
Nov 10, 2010
I recently got a new time capsule but I have difficulties setting up the internet connection. The time capsule is connected to our WAN using a cable in my office. The computers in our organization are authenticated using their MAC address. So, I have to add the MAC address of the time capsule to make it connected to the internet. I want to connect the TC to our WAN using a cable, then I want to connect my MacBook using a wireless connection to the TC.
When I config the TC using the NAT mode (Share a public IP address), I can use the internet but I get a double NAT error and TC's LED is yellow. When I config the TC using the Bridge Mode, the led goes green. Anyway, if I connect my MacBook using wireless I cannot reach the internet. I get no error in this case so I don't know what is happening inside the TC. Interestingly, if I connect the MacBook to the TC using an ethernet cable, it works perfectly! I have added all the MAC addresses of the wired and wireless interfaces to the list of my computers.
My time capsule drops its internet connection on a regular basis. Some times it will reconnect on its own. Sometimes I have to reboot the time capsule and the computer. Sometime I have to reconfirm the tc settings and once I had to delete the time capsule setting and reinstall.
The internet is high speed pppoe and the time capsule firmware is the latest version.
I seriously need your help with an ongoing issue that's been affecting my time capsule for a few weeks now. First of all, my Xbox360 is connected with a wire to my time capsule and now, it's pretty much impossible to play any games online. In Modern Warfare 2, I get horrible lag and after a game or two, the disconnected from xbox live appears and the only way for me to get back the connection is by unpluging the Time Capsule and restarting the Xbox. This gets me a good connection for 30-45 min and after that, same problem. I don't really know what could be causing this since I also lose connection while playing a single player game that doesn't require any incoming data. Sometimes, I just turn on the console, I see the xbox icon searching for an internet connection and then nothing.
I really need your input on this because everything else connected to my Time Capsule works perfectly (PS3 and Wii wireless and a Powerbook wired). The Powerbook never loses the connection.
I have a Time Capsule wirelessly connected to my iMac. Since I've encountered some problems with backups because of intermittent wifi connection failures, I want to switch to a wired connection with an ethernet cable. I know I could fiddle with the wifi channels etc. but since the TC is just sitting next to my iMac anyway, I could profit from the higher bandwidth of a wired connection as well.Two questions:
1. What exactly do I have to do to make the switch? Are there any new settings I have to apply? Create a new network?
2. Will I still be able to use the wifi connection to get on the internet using my smartphone?
Setting up the bluetooth so that I can use my mobile phone to access the internet on my mac. I have an LG phone but there isn't an LG option in the dropdown bar, does LG perhaps have another name that's in the list. Also what do I put in the username, password and phone number sections? I have tried to do it but it has failed.
I was wondering if Time Capsule can operate with UPS via USB connection (like QNAP or Synology or FreeNAS) ? Is there some option for it in firmware ?
I have the USB cable to connect the UPS to computer / other, and UPS can work this way ( Smart APC 650 ).
If not, i was wondering if Apple could add this function. I have AP client, 3 hard disks and 3com gigabit switch connected to TC. It would be nice if TC could check the power status of UPS, and work with it.
I have installed and have running a new Time Capsule. I would like to access files through the wireless network between two Apples and two PC's. At present the Apples are working wonderfully, however the PC running Windows 7 sees the network is unable to access it.
I have an old(er) iMac [24 inch white - 750gb - 3GB ram] that I have used for three years and just got a Mac Pro [3 TB - 8GB ram] that I am looking to set up for use with my other Apple stuff (AppleTV, Time Capsule, and iPhone)
Here's the deal - I have a baby at home (which means tons of pictures and video) and I wanted to figure out a way to best set up my gear to get the most out of it. I was thinking of using the iMac as an Internet/Media Streaming Machine and Use the Mac Pro for all my work/Photoshop/Editing stuff. Any thoughts?
And then there is Time Machine and the Apple TV - I have lots of stuff and am not sure the best way to set up my time capsule (1TB).
I am using my time capsule also as external hard drive. Recently i copied a series of files from my powerbook to the time capsule and tried to open them directly from the remote drive. It told me that access was denied (Permission denied). I checked the info and it said that I have "custom access". 3 Users groups were present, one (unknown), another group called staff, and a group called everyone; all with read and write priveleges. Only I wasn't present. When I dragged the file to the desktop, the unknown user disappeared and (Me) appeared. I could open the file normally from the desktop.
I have TC and wish to establish it is my router. Into it will be plugged a PC running Vista (trust me...it's gone in four months to be replace by an iMac!). I have a Macair that will link up wirelessly. Currently I'm running a home network through a Netgear DG834GB and connectivity is good.
My DSL service comes from Deutshe Telekom via a DSL spliter. Therefore, I suspect the Netgear is working as my router and DSL modem.
My initial trials of setting up the TC as a stand-alone router and through the Netgear have been a failure.
1) Can I run the TC as a stand alone router connected to the DSL splitter or do I require the Netgear as my modem?
2) If I need the Netgear, I need someone to walk me through the steps to configure the TC to operate via Ethernet connected to the Netgear.
I tried playing command and conquer: tiberium wars on windows. I have never had an issue playing with my old router but have recently upgraded to the Time Capsule and I could not connect when I was playing online. I could connect initially but when I would go into a game it just would not allow me to connect to start the game. I then plugged directly into my cable modem and was able to connect right away. Do I need to go into Time capsule and adjust a setting?
I'm home from college for the term, and I'm trying to get Xbox Live working on my brother's 360, but he managed to lose the wireless adapter. Instead of dropping the $100 for a new one, I'm trying to adapt the Time Capsule I already own to the purpose. My house already has a private wifi network, but the router is downstairs and the 360 is upstairs so I can't just run an ethernet cable to it.
What I want to do is set up the Time Capsule in the same room as the 360, connect it to the existing wireless network, then run an ethernet cable from the Time Capsule to the 360 so the 360 can connect to live. I tried joining the existing network, but that sets the TC up as a client and doesn't allow anything connected to it via ethernet to access the internet. Airport Utility won't let me set up the TC as an extension of the existing network unless it's connected via ethernet to the original access point, and like I said earlier, running ethernet cable isn't an option.
I'm moving into a house with 4 friends and we need to setup a home network which I am in charge of. 2 people have Macs and 3 have Windows. I want a central hard drive that everyone can throw their music and videos on to share. We also want wireless N. I was wondering if a Time capsule would be a good way and a good value or what the best way to set this up would be.
So I am moving to a new apartment in a week, and the landlord allows us access to his wifi in the building free, but I will not have access to the modem. I currently have a Time Capsule set up as my wifi router and was wondering if, upon moving, there is a way to run the wifi signal through my Time Capsule and use that as my wifi connection?
Ok so I bougth a Time Capsule over a month ago and recently Ive started having problems qith my connection and signal strenght, whiche constantly goes up to the minimun messing up with my internet, and when I enter to the airport utility the connection improves temporaly.
Anyone with same problem, is there a solution?
I have a Mac Book Pro with latest mac os x 10.5.6 and time capsule firmware 7.3.2
I know there have been many posts on this in the past but I think I am getting even slower speeds than most who have complained. My TC is backing up at a rate of about 1 Gig per 45 min to an hour. I have plugged in an ethernet cable and set ethernet above wireless in my network hierarchy but it appears that this is not working. This is my initial backup so I don't want to risk it by turning off my airport if it is transferring using wireless. Shouldn't the ethernet connection go much faster even though my Time Capsule is not plugged into our modem?
I have a Time Capsule wirelessly connected to my iMac. Since I've encountered some problems with backups because of intermittent wifi connection failures, I want to switch to a wired connection with an ethernet cable. I know I could fiddle with the wifi channels etc. but since the TC is just sitting next to my iMac anyway, I could profit from the higher bandwidth of a wired connection as well.
Two questions: 1. What exactly do I have to do to make the switch? Are there any new settings I have to apply? Create a new network? 2. Will I still be able to use the wifi connection to get on the internet using my smartphone?
I was using a Western Digital 1T hard drive connected to my Time Capsule USB port. It was set up as Allow file sharing with Time Capsule password. I would like to stop using it here and directly connect it to my Macbook Pro (by firewire). When I try to do this, I can see the drive but get a message that I do not have user permissions to access it. I can't seem to figure out a way around this. Is there something that I can change so that I can directly access the disk? Do I need to reformat the WD drive in Disk Utility to be able to use it directly again?
I'm having a problem with internet access at the moment. I've got a Time Capsule which is connected up to a Draytek Vigor 100 ADSL modem. In the past 4 or 5 days the Internet has been stalling to a halt. I've discovered that if I go into the Airport configuration utility and choose 'Renew DHCP Lease' on the Internet page everything starts working again.
I'm thinking about getting a Time Capsule. But I have a question. I don't want it to be the main modem in my home. I want to use it to back up wirelessly, or through cable, my important data, e.g. music, photos, videos etc etc. Can I do this through the internet that is already in my house?
I've been trying to get this to work for a few days now, and can't get a solution that's both permanent and will allow me to send to friends/ colleagues. I want to access my TimeCapsule over the internet to get at my files. I have it connected to a Linksys DIR-615 router and the router to a modem. If someone could explain how to set up my airport utility, and the ports for the router, I would be happy. Explaining how to make my time capsule have a consistent IP that I could redirect my domain's DNS to would be amazing.
Have been using this device (500GB, Late 2008) for awhile with no issues.
This week, it has been dropping my internet connection at least once per day. This is both wireless and LAN. The green light stays on. To bring it back up, all I do is unplug and it resets, so I don't think it is the DSL modem.
I am the Principal of a school and because of budget cuts - scary piece ahead - also the tech coordinator. I have a few older eMacs, some with airport cards and some without. My question/problem: I want to hook an eMac 10.4.11 directly into the Time Capsule to access the internet (the time capsule is acting as an extension of our wireless network). I have done this before successfully using an airport extreme, however, I am not successful to date in doing this with time capsule. It has been a while since I set up a computer this way. My question is am I missing a trick (using ethernet cord into LAN port), or is it not possible.
after reading a lot manuals and threads I'm now completely lost and can't get it run.
This is what I'd like to do: 1. I have Linksys router set up as wifi hotspot 2. My iMac accesses internet via wifi via linksys 3. I'd like to hook time capsule via ethernet cable to my imac 4. i want time capsule to use my iMac's internet but extend at the same time the wifi internet access
a. Can I backup from iMac to time capsule via ethernet? b. Which settings I have to do on my iMac and which on time capsule to get my scenario run ?
I use my time capsule to transfer files between various computers, including ones that aren't on my same home network. For mac's, setting up filesharing over the internet works great, and I don't have any issues connecting to the time capsule remotely using [URL]
The issue comes if I try to connect a windows XP PC to my time capsule as a file server. I can connect one just fine if its on the local network, but I have been unable to do so for one remotely. Every indication I've seen online says that it should be possible to connect to via SMB, but I haven't been able to get it to work. Are there any specific settings that should be chosen either on the time capsule or on the PC to get it to work? Perhaps I'm not connecting to it via the PC correctly. Is connecting to it as a network drive at [URL] not correct? I've come across a few guides related to similar topics, but they all assume that the time capsule is just connected to your local network, and mine is also acting as my router.
I will be getting a MBP but I will need more storage, hence the external hard drive. I wanted to buy time capsule but I read that it is not possible to partition it. So, would I be better off with an external hard drive(FireWire 800) that I can actually partition or get time capsule which offers the wireless connection. As for the speed I guess the wireless connection with time capsule must be pretty slow?
Does it make a difference in speed if I have the time capsule connected directly to the internet, opposed to it connecting wirelessly? I'm still backing up and using the Time Capsule wirelessly from my computer, but I have the internet plugged directly into it- making a wireless network for my laptop to pick up. Does it make a difference? I would kindof imagine that it would only make much difference if I plugged my laptop itself to the Time Capsule directly, since wireless internet speed doesn't seem to different on it's own anyway.
